• 풍력에너지저널
• /
• 제15권2호
• /
• pp.37-44
• /
• 2024

In this study, a tensile test and FE analysis were conducted on a bolt-connected L-shaped flange to evaluate its behavior and load resistance. A total of five specimens were manufactured using the inner and outer distances and bolt diameters of the L-type flange as experimental variables. As a result of the tensile test of the L-shaped flange, as the internal and external length ratio (b/a) increased, the maximum load decreased and the maximum displacement increased. As the diameter (d) of the bolt increased, the maximum load and the deformation of the wall increased. The shapes of the destruction specimens showed two forms of destruction: one due to the fall of the nut and the surrender of the bolt as the thread of the bolt and nut was worn out, followed by the surrender of the wall. As a result of FE analysis, it was found that elasto-plastic model (EPM) analysis similarly tracks the behavior of the tensile test results.

• 한국전산구조공학회논문집
• /
• 제34권5호
• /
• pp.279-286
• /
• 2021

본 논문에서는 풍력터빈과 하부구조물을 연결하는 L형 플랜지 볼트 접합부의 거동 특성에 대한 연구를 수행하였다. L형 플랜지 볼트 접합부는 링(Ring) 형태의 L형 단면 플랜지가 볼트에 의해 상하 체결되는 방식으로서 국내 풍력터빈에서 주로 적용되고 있는 연결방식이다. 특히 풍력타워 구조물은 이들 연결부의 손상이 전체 구조시스템의 붕괴로 이어질 수 있으므로 중요한 구조 요소 중 하나이다. 따라서 L형 플랜지 볼트 접합부에 대한 정확한 거동 특성의 이해가 필요하다. 본 연구에서는 FE 해석을 통하여 L형 플랜지에 작용하는 외력과 볼트장력의 관계, 그리고 L형 플랜지의 응력분포 변화를 외력 작용 단계별로 분석하였다. 여기서 FE 해석모델은 실제 링 형태의 L형 플랜지를 단일볼트의 L형 플랜지로 이상화하였다. 또한 볼트장력과 작용외력의 관계를 이론적으로 제안한 Petersen, Schmidt와 Neuper 그리고 VDI 2230의 볼트-외력 곡선모델에서 언급되는 접합부의 거동 불연속점과 FE 해석결과를 비교함으로써 FE 해석조건의 적절성을 검증하고, 각 볼트-외력 곡선모델의 특징과 L형 플랜지 볼트 접합부 거동 특성을 분석하였다. 그리고 L형 플랜지 단면 제원을 일부 변화시켜 볼트-외력 곡선의 변화를 분석하였다.

• Steel and Composite Structures
• /
• 제38권6호
• /
• pp.657-670
• /
• 2021

This paper presents a designing method for enhancing fire resistance of steel box bridge girders (closed steel box bridge girder supporting a thin concrete slab) through taking into account such parameters namely; fire severity, type of longitudinal stiffeners (I, L, and T shaped), and number of longitudinal stiffeners. A validated 3-D finite element model, developed through the computer program ANSYS, is utilized to go over the fire response of a typical steel box bridge girder using the transient thermo-structural analysis method. Results from the numerical analysis show that fire severity and type of longitudinal stiffeners welded on bottom flange have significant influence on fire resistance of steel box bridge girders. T shaped longitudinal stiffeners applied on bottom flange can highly prevent collapse of steel box bridge girders towards the end of fire exposure. Increase of longitudinal stiffeners on bottom flange and web can slightly enhance fire resistance of steel box bridge girders. Rate of deflection-based criterion can be reliable to evaluate fire resistance of steel box bridge girders in most fire exposure cases. Thus, T shaped longitudinal stiffeners on bottom flange incorporated into bridge fire-resistance design can significantly enhance fire resistance of steel box bridge girders.

• 한국강구조학회 논문집
• /
• 제13권4호
• /
• pp.419-431
• /
• 2001

본 연구에서는 단부 RC 중앙보 S조 혼합보에 대해 RC부 주근의 정착방법(플랜지 위에 직접 용접, 스터드 볼트 용접 정착) 과 이질구조부 (SRC 부)의 보강 방법에 따른 구조적 거동 분석을 고찰하였다. 이질구조부 보강방법으로는 무보강, 수직전단보강근 보강[D10-@50], 경사보강(X자형 보강), 수평보강1[웨브보강(0.3L)], 수평보강2[웨브보강(0.3L)], 수직보강[플랜지보강(0.3L)]과 같은 보강방법을 주요변수로 하여 구조적 특성을 상호 비교 분석하였다. 그 결과 보 주근의 정착방법에 따른 연성능력 및 내력 등과 같은 구조적 특성에는 큰 차이가 없었으며, 혼합구조보의 구조적 특성을 극대화시키기 위해서는 이질구조부를 수직보강한 경우와 2열 수평으로 보강한 방법이 가장 효과적인 것으로 나타났다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1868-1873
• /
• 2011

In this paper, a theoretical formulation of a simplified wheel-set model for collision-induced derailments was evaluated by numerical simulations for the wheel-climb derailment and wheel-lift derailment types. The derailment types were classified into the wheel-climb derailment and the wheel-lift derailment according to the friction force direction of the wheel-flange. The wheel-climb derailment type was classified into Climb-up, Climb/Roll-over, and Roll-over-C, and wheel-lift derailment type was classified into Slip-up, Slip/Roll-over and Roll-over-L. To verify the theoretical equations derived for the wheel-climb derailment and the wheel-lift derailment, dynamic simulations using RecurDyn of Functionbay and Ls-Dyna of LSTC were performed and compared for some examples. The derailment predictions of the suggested theoretical formulation were in good agreement with those of the numerical simulations. The direction of the frictional force between the wheel-flange and the rail can be well predicted using the suggested derailment formulation at a initial derailment.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.391-394
• /
• 2007

The foundation insert is a tubular steel section which is embedded into the concrete of the foundation. The tower base section of the wind turbine is mounted on it. It has a top flange (L type) protruding far enough above the concrete to allow bolts to be inserted from underneath. The load is transmitted to the concrete at the base of the section through a T shaped flange. It has many holes for the reinforcements and the cables. The reinforcements of the concrete foundation run through the insert via a series of holes to bind the inner section to the outer section. Holes are provided for the power and communications cabling. The design follows normal European wind turbine practice, based on GL 2003 and Eurocode regulations.

• Steel and Composite Structures
• /
• 제26권6호
• /
• pp.793-808
• /
• 2018

In this study, the seismic performance of the connections between L-shaped columns composed of concrete-filled steel tubes (L-CFST columns) and H-beams used in high-rise steel frame structures was investigated. Seven full-scale specimens were tested under quasi-static cyclic loading. The variables studied in the tests included the joint type, the axial compression ratio, the presence of concrete, the width-to-thickness ratio and the internal extension length of the side plates. The hysteretic response, strength degradation, stiffness degradation, ductility, plastic rotation capacity, energy dissipation capacity and the strain distribution were evaluated at different load cycles. The test results indicated that both the corner and exterior joint specimens failed due to local buckling and crack within the beam flange adjacent to the end of the side plates. However, the failure modes of the interior joint specimens primarily included local buckling and crack at the end plates and curved corners of the beam flange. A design method was proposed for the flexural capacity of the end plate connection in the interior joint. Good agreement was observed between the theoretical and test results of both the yield and ultimate flexural capacity of the end plate connection.

• 한국공작기계학회논문집
• /
• 제16권4호
• /
• pp.93-100
• /
• 2007

The flow velocity distribution at inlet and exit of Diesel Particulate Filter(DPF) by fabricating L-shape connector with the DPF was measured using a Pitot-tube and 2-D transverse machine. An adaptor designed for making the Pitot tube probe access to the inlet and exit of the DPF was connected with the inlet and exit flange of the DPF, respectively. The Pitot tube which was mounted in the 2-D positioning machine could access to the inlet and exit of the DPF through the rectangular window of the adaptor. The L-shape connector in the DPF inlet has a flow guide which is a perforated steel pipe. The flow velocity distribution at the inlet of the DPF showed a chaotic velocity distribution which is different from that with a diffuser type connector. The velocity distribution at the exit of the DPF showed a crown shape which is similar to that of the diffuser type connector. The velocity distribution at the exit of DPF showed different patterns according to the air flow rate.

• 국제강구조저널
• /
• 제18권4호
• /
• pp.1153-1166
• /
• 2018

This paper was concerned with the nonlinear analysis on the overall stability of H-type honeycombed composite column with rectangular concrete-filled steel tube flanges (STHCC). The nonlinear analysis was performed using ABAQUS, a commercially available finite element (FE) program. Nonlinear buckling analysis was carried out by inducing the first buckling mode shape of the hinged column to the model as the initial imperfection with imperfection amplitude value of L/1000 and importing the simplified constitutive model of steel and nonlinear constitutive model of concrete considering hoop effect. Close agreement was shown between the experimental results of 17 concrete-filled steel tube (CFST) specimens and 4 I-beams with top flanges of rectangular concrete-filled steel tube (CFSFB) specimens conducted by former researchers and the predicted results, verifying the correctness of the method of FE analysis. Then, the FE models of 30 STHCC columns were established to investigate the influences of the concrete strength grade, the nominal slenderness ratio, the hoop coefficient and the flange width on the nonlinear stability capacity of SHTCC column. It was found that the hoop coefficient and the nominal slenderness ratio affected the nonlinear stability capacity more significantly. Based on the results of parameter analysis, a formula was proposed to predict the nonlinear stability capacity of STHCC column which laid the foundation of the application of STHCC column in practical engineering.

• 한국진공학회지
• /
• 제11권2호
• /
• pp.81-86
• /
• 2002

KSTAR 진공용기의 대형포트에 사용하려고 계획하고 있는 Helicoflex 개스킷의 특정 모델에 대해 플랜지 체결 특성 특히 토크(또는 선하중) 및 변형량과 기체누설률의 관계를 조사하여 기밀곡선을 구하는 실험을 수행했다. 그 결과 상온에서는 Ml8 볼트의 경우 토크 2500 kg.cm에서 Helicoflex를 채용한 플랜지의 기체누설률은 $2\times10^{-1}$ /mbar.L/s이하였다.