• Polymer(Korea)
• /
• v.35 no.1
• /
• pp.52-59
• /
• 2011

L-PLA or D-PLA was synthesized in bulk at $140^{\circ}C$ by ring opening polymerization(ROP) of L-lactide or D-lactide as a monomer using tin(II) octoate and lauryl alcohol as a catalyst and an initiator with changing the amounts of catalyst(0.25~1.0 wt%) and initiator(0.l~0.5 wt%). And stereocomplex-PLA was prepared by L-PLA/D-PLA having a wide range of molecular weight(30000~90000 g/mol) and L-PLA/D-PLA blends having different mixing ratio ($X_D$). The melting temperature. thermal degradation temperature and thermal stability of stereocomplex-PLA were higher than those of homopolymers(L-PLA, D-PLA). We supposed that these improvements arose from a strong interaction between L-PLA and D-PLA. The improved mechanical properties and changes in morphology of LPLA/D-PLA blends were compared to those of homopolymers(L-PLA, D-PLA).

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.550-553
• /
• 2000

The polymeric matrices made with poly(D,L-lactide-co-glycolide) were prepared using copolymer of poly(D,L-lactide) and poly(ethylene glycol) for application of drug delivery systems. Catalyst made use of stannous actoate. Particle size were differ greatly$(435.3{\pm}11.2{\sim}2284.1{\pm}188.5)$ that nanoparticle made use of according to solvent of various kinds. Polymer could a sharp distinction with copolymerized among LE-1, LE-2 and LE-3 of PLA and PEG of content that to examine $^1H-NMR$ of copolymer make refine and reprecipitation. Drug delivery effect at PLGA nanoparticle : PLA amount more then proved highly drug delivery amount that each LE-1, LE-2, LE-3, drug and solvent was 40mg, 20mg and 10mg. Drug delivery effect proved higher 20mg that change(10mg, 20mg, 40mg) at drug feeding amount with LE-2. The first a lot of drug proved delivery. LE-3 most lactide content proved much delivery since biodegradable on PLGA copolymer result from lactide. Also biodegradable rate was highest at LE-3 much of lactide content, because influence at biodegradable effect of lactide by inclusive of soft PEG.

• Journal of Environmental Science International
• /
• v.23 no.3
• /
• pp.473-481
• /
• 2014

Poly(lactide)s(PLA) is an attractive material to solve the problem of waste plastic accumulation in nature because of its biodegradability. The lactide exists in three stereoisomeric configurations: L-lactide, D-lactide, and meso-lactide. PLA stereocomplexes, formed by the mixing of two enantiomers, poly(L-lactide)(PLLA) and poly(D-lactide)(PDLA), have many favorable characteristics because the stereocomplex showed $50^{\circ}C$ higher melting point than each enantiomeric polymer and the resistance toward degradation increased. In this study, we investigated the influence of the composition and the optical purity of each component on the formation of stereocomplexes. Also, the nanofibers of stereochemical PLA and their blends were prepared by electrospinning method. The properties of the obtained fibers were analyzed by differential scanning calorimetry and scanning electron microscopy. The results showed that a degree of stereocomplex was controlled by change of optical purity of each component. The enzymatic degradation of the fibers were strongly dependent on the stereocomplex.

• Journal of Environmental Science International
• /
• v.18 no.7
• /
• pp.797-802
• /
• 2009

To control degradation rate of biodegradable poly(lactide)s (PLA), the stereochemical PLAs with different ratios of d-lactide and l-lactide units were synthesized by the ring open polymerization and the their degradation kinetics were measured by a Langmuir film balance. The alkaline (pH=11) degradation of poly(l-lactide) (l-PLA) monolayer showed the faster rate at a surface pressure of 4 mN/m in the ranges from to 0 to 7 mN/m. However, the enzymatic degradation of l-PLA with Proteinase K did not occur until 4 mN/m. Above a constant surface pressure of 4 mN/m, the degradation rate was increased with a constant surface pressure. These behaviors might be attributed to the difference in the contacted area with degradation medium: alkaline ions need small contact area with l-PLA while enzymes require much bigger one to be activated due to different medium sizes. The stereochmical PLA monolayers showed that the alkaline degradation was increased with their optical impurities while the enzymatic one was inversed. These results could be explained by the decrease of crystallinity with the optical impurity and the inactivity of enzyme to d-LA unit.

• Macromolecular Research
• /
• v.11 no.6
• /
• pp.511-513
• /
• 2003

Hydroxyl groups were introduced onto the surface of a silicon wafer by O$_2$ plasma treatment. Poly(l-lactide) (1-PLA) was attached onto the surface-modified silicon wafer by the ring-opening polymerization of l-lactide using the hydroxyl group as an initiator. Lamellar single crystals of 1-PLA were grown directly on the 1-PLA-attached silicon wafer from a 0.025% solution in acetonitrile at 5$^{\circ}C$. A well-separated, lozenge-shaped, monolayered lamellar single crystal was prepared because the 1-PLA-attached silicon wafer acts as an initial nucleus.

• Polymer(Korea)
• /
• v.37 no.5
• /
• pp.600-605
• /
• 2013

In this study, the bulk polymerizations of L-lactide were carried out with triethylaluminium (TEAL), which was supported inside of the nanopore of silica. The feed amount of TEAL in the feed, the immobilization time and temperature were changed to observe the effect of immobilization condition on the polymerization performance with the silica- supported TEAL. As the feed amount of TEAL increased, the conversion of polymerization increased. The highest molecular weight (MW) was achieved at 8 mmol/g-silica of TEAL. Hexane and toluene as solvents were employed to investigate the effect of temperature on the immobilization. Hexane showed better efficiency of immobilization TEAL and the immobilization temperature at $50^{\circ}C$ showed the highest conversion and MW.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10a
• /
• pp.97-97
• /
• 2003

Recently, attention has been paid to biodegradable polymers in relation to the global environment. Poly-lactide (PLA) is one of such polymers and has studied by some investigators. In this study, the changes of crystal structure, crystal orientation and supermolecular structure of Poly(L-lactide) (PLLA) during drawing or annealing have been investigated.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.5 s.108
• /
• pp.53-61
• /
• 2004

[ $Poly(_{D}-ldactide)\;(_{D}-PLA)$ ] was synthesized to have low molecular weight for miscible blends with a high molecular $poly(_{L}-lactide)\;(_{L} -PLA)$. The blends were prepared by dissolving the two components of $_{L}-PLA\;and\;_{D}-PLA\;(w/w)$ in chloroform (l00/0, 90/10, 70/30, 50/50, 30/70, 0/100). The miscibility of these miscible blends was characterized by gel-permeation chromatography (GPC), differential scanning calorimetry (DSC), and the selective degradability by enzymes (proteinase K, subtilisin and $\alpha$-chymotrypsin). The coating efficiency of PLA blends onto paper was determined and the degrading activity cellulases by on these blends. The miscibility, coating efficiency and enzymatic degradability of these blends were decreased according to increasing of $_{D}-PLA$ blending part. Such results were attributed to the extent of coating application of PLA, with better miscibility (compatibility), coating efficiency and degradability due to a higher $_{L}-PLA$ content.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.622-624
• /
• 2003

Poly(lactic acid) is a biodegradable themoplastic based on the renewable resources to substitute for petrochemical plastics. Most of PLA is produced by ring opening polymerization from lactide. However, pyrolysis process in the lactide synthesis is expensive, we studied lactide synthetic process for more economical preparation of PLA. In this research was tried to minimize the pyrolysis time, and obtained L-lactide from lactic acid without any catalyst.

• Journal of Environmental Science International
• /
• v.15 no.2
• /
• pp.177-183
• /
• 2006

The hydrolytic kinetics of biodegradable poly(l-lactide) (PLLA) have been studied by using two model systems, solution-grown single crystal (SC) and Langmuir monolayer techniques, for elucidating the mechanism for both alkaline and enzymatic degradations. The present study investigated the parameters such as degradation medium and time. The Langmuir mono layers of PLLA showed faster rates of hydrolysis when they were exposed to a basic subphase rather than they did when exposed to neutral subphase. Both degradation mediums had moderate concentrations to show a maximized activity, depending on their sizes. An alkaline degradation of SCs of PLLA showed the decrease of molecular weight of the remained crystals due to the erosion of chain-folding surface. However, the enzymatic degradation of SCs of PLLA occurred in the crystal edges thus the molecular weight of remained crystals was not changed. This behavior might be attributed to the size of enzymes which is much larger than that of alkaline ions; that is, the enzymes need larger contact area with monolayers to be activated.