• 토지주택연구
• /
• 제8권4호
• /
• pp.223-232
• /
• 2017

The purpose of this study is to identify the supply status and planning trend of North Korean housing through analysis on the North Korean architecture specialized media data. The flat composition is changing and the living room is becoming the center of the houses. Also, in the urban areas, the standard apartment type is four apartments in a row and the plan form is getting diversified into circle type, Y type, and irregular type. On the other hand, in the rural areas, two houses in a row and single house are typical and the change in planning scale and space structure are not substantial. Since the 2000s, design changes have been made to emphasize the third dimensional structure of buildings such as the elliptical houses and L-shaped houses. Furthermore, 8~10 households are located on one floor which leads to the tendency of the building enlargement. In terms of house size, a square concept was introduced to replace the initial 2~3 room concept and the basic module of the room planning the 3 room house based on $3m{\times}3m$. However, there seems to be no standard house size, and the house size may differ depending on the social classandregion. In the early 1980s, when there was focus on the apartment complex construction, the high-rise apartment buildings of 30~40 floors was planned. However, during the Pyongyang redevelopment project, apartments of more or less than 10 floors were built and row-houses of more or less than 4 floors were built. In terms of the complex scale, a lot of small complexes of around 300 households are emerging after 2010. The construction projects are mainly limited to specific regions such as Pyongyang and Samjiyeon, and also limited to specific classes such as the workers and soldiers initially and the scientists lately. In addition, living boundary composition and ancillary facilities for sufficient green area ratio securement and the people of North Korea are maintained consistently. In recent years, the specialized floor planning such as solar house and the house for the disabled people, framework houses for redevelopment business, and multi-storied house construction technology are also emerging.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.17-17
• /
• 2010

This paper address technical issues in calibrating discharge coefficients of sonic nozzles used to measure the volume flow rate of low vacuum dry pumps. The first challenging issue comes from the technical limit that their calibration results available from the flow measurement standard laboratories do not fully cover the low vacuum measurement range although the use of sonic nozzles for precision measurement of gas flow has been well established in NMIs. The second is to make an ultra low flow sonic nozzlesufficient to measure the throughput range of 0.01 mbar-l/s. Those small-sized sonic nozzles do not only achieve the noble stability and repeatability of gas flow but also minimize effects of the fluctuation of down stream pressures for the measurement of the volume flow rate of vacuum pumps. These distinctive properties of sonic nozzles are exploited to measure the pumping speed of low vacuum dry pumps widely used in the vacuum-related academic and industrial sectors. Sonic nozzles have been standard devices for measurement of steady state gas flow, as recommended in ISO 9300. This paper introduces two small-sized sonic nozzles of diameter 0.03 mm and 0.2 mm precisely machined according to ISO 9300. The constant volume flow meter (CVFM) readily set up in the Vacuum center of KRISS was used to calibrate the discharge coefficients of the machined nozzles. The calibration results were shown to determine them within the 3% measurement uncertainty. Calibrated sonic nozzles were found to be applicable for precision measurement of steady state gas flow in the vacuum process. Both calibrated sonic nozzles are demonstrated to provide the precision measurement of the volume flow rate of the dry vacuum pump within one percent difference in reference to CVFM. Calibrated sonic nozzles are applied to a new 'in-situ and in-field' equipment designed to measure the volume flow rate of low vacuum dry pumps in the semiconductor and flat display processes.

• 한국재료학회지
• /
• 제8권11호
• /
• pp.1067-1073
• /
• 1998

CO와 $H_2$의 탄소원을 사용한 마이크로파 플라즈마 화학기상증착 방법으로 SOD 구조에 적용될 양질의 다이아몬드 박막을 형성하였고, SOD 구조를 형성하기 위해 diamond/Si(100) 구조 위에 poly-Si 박막을 저압화학기상 증착법으로 제작하였다. CO/$H_2$탄소원의 유량비 증가에 따라 다이아몬드의 결정은 octahedron 구조에서 cubo-octahedron 구조로 바뀌었으며, 결정면은 {111}과 {100}으로 혼합되어 형성되었다. 비정질 carbon과 non-diamond성분이 없는 양질의 다이아몬드 박막은 CO/$H_2$의 유량비가 0.18일 때 형성되었으며, 주 결정상은 (111) 면이었다. diamond/Si(100) 계면은 void가 없는 평활한 계면을 이루었으며, 다이아몬드 박막의 유전상수, 누설전류와 비저항은 각각 $5.31\times10^{-9}A/cm^2$ 그리고 $9\times{10^7}{\Omega}cm$이었다.

• Ocean and Polar Research
• /
• 제28권3호
• /
• pp.225-236
• /
• 2006

Seagrass meadows are considered as critical habitats for a wide variety of marine organisms in coastal and estuarine ecosystems. In many cases, studies on the spatial/temporal distribution of seagrass have depended on direct observations using SCUBA diving. As an alternative method fur studying seagrass distribution, an application of hydroacoustic technique has been assessed for mapping seagrass distribution in Dongdae Bay, on the south coast of Korea, in September 2005. Data were collected using high frequency transducer (420 kHz split-beam), which was installed with towed body system. The system was linked to DGPS to make goo-referenced data. Additionally, in situ seagrass distribution has been observed using underwater cameras and SCUBA diving at four stations in order to compare with acoustic data. Acoustic survey was conducted along 23 transects with 3-4 blot ship speed. Seagrass beds were vertically limited to depths less than 3.5m and seagrass height ranged between 55 and 90cm at the study sites. Dense seagmss beds were mainly found at the entrance of the bay and at a flat area around the center of the bay. Although the study area was a relatively small, the vertical and spatial distributions of the seagrass were highly variable with bathymetry and region. Considering dominant species, Zostera marina L., preliminary estimation of seagrass biomass with acoustic and direct sampling data was approximately $56.55g/m^2$, and total biomass of 104 tones (coefficient variation: 25.77%) was estimated at the study area. Hydroacoustic method provided valuable information to understand distribution pattern and to estimate seagrass biomass.

• 대한기계학회논문집A
• /
• 제41권6호
• /
• pp.525-532
• /
• 2017

차세대 주력 디스플레이인 유기 및 양자점 발광 다이오드를 잉크젯을 이용하여 저렴한 비용으로 생산하기 위한 연구개발이 진행되어 왔으며, 잉크 액적의 토출 신뢰성을 고속으로 검사하기 위한 모니터링 장비의 개발이 요구된다. 본 연구에서는 기존 직선 운동 방식의 잉크젯 모니터링 장비 대신에 로터리 및 리니어 초음파 모터를 이용하여 미러를 회전시킴으로써 노즐들에서 토출되는 잉크 액적들을 모니터링할 수 있는 장비를 개발하여 측정 능력을 시험하였다. $10{\mu}m$, $30{\mu}m$ 및 $50{\mu}m$ 직경 원형의 측정 오차는 각각 $0.5{\pm}1.0{\mu}m$, $-1.2{\pm}0.3{\mu}m$ 및 $0.2{\pm}0.5{\mu}m$였다. 모니터링 시간은 17초가 소요되었으며, 제어 프로그램의 최적화를 통해 8.6초까지 모니터링 시간을 단축할 수 있는 가능성을 확인하였다.

• Journal of Communications and Networks
• /
• 제13권6호
• /
• pp.602-611
• /
• 2011

The inter-domain routing scalability issue is a major challenge facing the Internet. Recent wide deployments of multihoming and traffic engineering urge for solutions to this issue. So far, tunnel-based proposals and compact routing schemes have been suggested. An implicit assumption in the routing community is that structured address labels are crucial for routing scalability. This paper first systematically examines the properties of identifiers and address labels and their functional differences. It develops a simple Internet routing model and shows that a binary relation T defined on the address label set A determines the cardinality of the compact label set L. Furthermore, it is shown that routing schemes based on flat address labels are not scalable. This implies that routing scalability and routing stability are inherently related and must be considered together when a routing scheme is evaluated. Furthermore, a metric is defined to measure the efficiency of the address label coding. Simulations show that given a 3000-autonomous system (AS) topology, the required length of address labels in compact routing schemes is only 9.12 bits while the required length is 10.64 bits for the Internet protocol (IP) upper bound case. Simulations also show that the ${\alpha}$ values of the compact routing and IP routing schemes are 0.80 and 0.95, respectively, for a 3000-AS topology. This indicates that a compact routing scheme with necessary routing stability is desirable. It is also seen that using provider allocated IP addresses in multihomed stub ASs does not significantly reduce the global routing size of an IP routing system.

• 한국식품저장유통학회지
• /
• 제9권1호
• /
• pp.14-18
• /
• 2002

전국에서 수집한 완숙과 호박의 중량은 대부분 4~8kg이었으며, '창녕 I', '횡성' 및 '장수' 품종은 과육의 중량이 10 kg 이상으로 비교적 크고 논산, 여주 및 삼척 지역에서 수집된 호박은 중량 2kg 이하로 작았다. 호박의 형태는 '보은'을 비롯한 12개 수집종이 편원형을, '탕녕II'를 비롯한 5개 수집종이 원형을, 나머지는 장타원형이었다. 가용성 고형물은 '삼척' 호박이 14.4 。Brix로 가장 높았으며, '합천'과 '임실'도 12 。Brix 이상으로 가용성 고형물이 높은 편이었다. 과육의 L값은 60~80사이로 유사하였으나, 'a','b' 값은 수집종간 차이가 있었다. 호박주스의 가용성 고형물은 5.00~9.90 。Brix를 나타내었으며 '제주I ' 품종의 가용성 고형물이 가장 높았다. 호박주스의 수율은 혼탁형 주스 53.0~68.0%, 청징형 주스 48.8~61.4%였으며 '양구'가 가장 높았다. 호박주스의 색상에 대한 기호도는 '울진'이 가장 높은 점수를 받았다.

• 한국수산과학회지
• /
• 제16권2호
• /
• pp.75-81
• /
• 1983

1981년 7월부터 1982년 6월까지 매월 부산 해운대 동백섬 해안에서 낚시와 삼중자망으로 채집한 노래미(Agrammus agrammus)의 추체를 사용하여 연령과 성장을 조사하였다. 추체반경과 어체의 전장 간에는 직선회귀관계가 있었다. 추체의 불투명대에서 투명대로 이행하는 경계를 윤문으로 간주한 본연구에서의 윤문은 매년 $7{\sim}8$월에 형성되었고, 제1, 2, 3, 4 윤문이 형성되는 데는 각각 0.67년, 1.67년, 2.67년, 3.67년이 걸렸다. 비만도의 월별변화로 조사한 산란기는 12월로 추정되었다. 각 윤문이 형성될 때의 전장을 역계산하여 다음과 같은 버트란피 성장식을 구할 수 있다. $l_t=31.68(1-e^{-0.189(t+1.458)})\;W_t=528.30(1-e^{-0.189(t+1.458)})^3$이 식으로부터 구한 추정전장은 실측전장과 잘 일치하였다.

• 한국식품영양과학회지
• /
• 제32권2호
• /
• pp.185-190
• /
• 2003

시판 꽃게와 가자미에서 Vibrio를 분리하여 Api 20E kit로 동정한 결과 V. parahaemolyticus HY I과 V. vulnificus FST I으로 동정되었다. 분리 Vibrio와 V.parahaemolyticus ATCC 17802에 대한 솔잎 추출물의 항균활성 검색을 실시한 결과 솔잎 추출물 1%를 첨가하였을 경우 뚜렷한 성장억제현상을 나타내었다. 시판 고추냉이와 솔잎 ethanol 추출물을 혼합하여 각 Vibrio에 대한 성장억제효과를 검토한 결과 l%고추냉이 단독 첨가구보다 1% 솔잎 추출물과 혼합치리구가 뚜렷한 성장억제효과를 나타내었다. 시판 고추냉이를 간장에 첨가하여 고추냉이 간장을 제조한 다음 Vibrio균의 생존을 실험한 결과 솔잎 추출물 1%를 첨가한 고추냉이 간장에서 Vibrio 생균수의 감소는 뚜렷하였다 고추냉이 간장을 제조 한 다음 관능검사를 실 시 한 결과 5% 수준에서 대조구와 솔잎 추출물 첨가구 간의 유의적인 차이는 나타나지 않았다.

• Smart Structures and Systems
• /
• 제22권4호
• /
• pp.481-493
• /
• 2018

Ultrasonic guided waves have attracted increasing attention for non-destructive testing (NDT) and structural health monitoring (SHM) of bridge cables. They offer advantages like single measurement, wide coverage of acoustical field, and long-range propagation capability. To design defect detection systems, it is essential to understand how guided waves propagate in cables and how to select the optimal excitation frequency and mode. However, certain cable characteristics such as multiple wires, anchorage, and polyethylene (PE) sheath increase the complexity in analyzing the guided wave propagation. In this study, guided wave modes for multi-wire bridge cables are identified by using a semi-analytical finite element (SAFE) technique to obtain relevant dispersion curves. Numerical results indicated that the number of guided wave modes increases, the length of the flat region with a low frequency of L(0,1) mode becomes shorter, and the cutoff frequency for high order longitudinal wave modes becomes lower, as the number of steel wires in a cable increases. These findings were used in design of transducers for defect detection and selection of the optimal wave mode and frequency for subsequent experiments. A magnetostrictive transducer system was used to excite and detect the guided waves. The applicability of the proposed approach for detecting and locating wire breakages was demonstrated for a cable with 37 wires. The present ultrasonic guided wave method has been found to be very responsive to the number of brokenwires and is thus capable of detecting defects with varying sizes.