• Transactions of the KSME C: Technology and Education
• /
• v.3 no.3
• /
• pp.217-223
• /
• 2015

The patterning of microbead in microfluidics channel is a practical technique for application in bio and medical areas. An approach is described for a direct patterning of magnetically active microbeads in microfluidic devices without inner structure. Local magnet arrangements - flat arrangement and stack arrangement - contacting same poles or opposite poles of magnet were utilized for generating trapping magnetic fields. The arrangement of magnets contacting same poles generated isolated patterns by repelling of magnetic field. The flat arrangement of vertically reverse magnet arrays shaped trapping patterns repelling magnetic field line between same poles. Spatially, the stack compositions of magnet arrangements allow diverse isolated trapped patterns of magnetic particles. Trapped magnetic particles in fluidic channels were stable on the $18m{\ell}/hr$ flow conditions and magnetic force of 1.08 mT in the all experiments. This experimental study suggests the simple and versatile methods to pattern magnetic particles, and has potential of wide application to bio and medical area.

• Korean Journal of Environment and Ecology
• /
• v.30 no.5
• /
• pp.810-820
• /
• 2016

This study is focused on the investigation of the genes which are induced by various stresses of the halophyte Salicornia herbacea. One of the factors influencing in the germination of Salicornia herbacea is salt stress. The highest germination rate was found in the condition without NaCl, and the upper limit of the NaCl concentration for the germination of Salicornia herbacea was 7%. The optimal temperature of $20^{\circ}C$showed a germination rate of 98%. Among genes induced by stress the 2CysPrx gene was cloned and analyzed for this study. The 2CysPrx gene has two cysteine conserved residues and is composed of 275 amino acids with molecular weight of 30.1kDa. The 2CysPrx gene appeared to be one copy in the genome and consists of 6 introns and 7 exons. Quantitative real-time PCR revealed that the highest transcription rate induced by NaCl and $H_2O_2$ appeared to be at the concentration of 3.5% NaCl and 40mM $H_2O_2$, respectively. The amount of transcript induced by high temperature($40^{\circ}C$) and $75{\mu}M$ of ABA was respectively highest. The gene at low temperature ($4^{\circ}C$) appeared not to be expressed. We are conducting to clone other peroxyredoxin genes induced by various environmental stresses.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.8 no.4
• /
• pp.411-419
• /
• 2003

Dredged material during Masan Bay cleaning in 1990-1994 was deposited in Gapo area. The site provides an ideal experimental condition to monitor environmental remediation and benthic ecosystem stabilization processes after the disturbance. Sea water samples were taken during one tidal cycle in one hour interval from Oct. 2001 to Apr. 2002 (4 times) to estimate the organic matter and nutrient fluxes in Gapo area. Hourly material fluxes were estimated from the water balance estimated from 3 dimensional topography of Gapo area and from material concentration. Net material fluxes were estimated from the difference between total influx and total outflux during one tidal cycle. Chemical oxygen demand showed net outflux in Nov. 2001, Dec. 2001 and Apr. 2002 (2.2∼3.9 g m$\^$-2/ h$\^$-1/) and showed net influx in Mar. 2002 (1.4 g m$\^$-2/ h$\^$-1/). Ammonium showed net outflux during the study (0.1∼118 mg m$\^$-2/ h$\^$-1/m-2h-I). According to this investigation, Gapo area was a source rather than a sink of organic matter. However, the variability of the material fluxes was high so that a long term study may be required.

• 한국해양학회지
• /
• v.30 no.5
• /
• pp.403-412
• /
• 1995

The present study was performed to determine th growth and production of Mactra veneriformis on the Songdo tidal flat off Inchon. west coast of Korea. Monthly samples were collected from Marc 1989 to September 1990. The size distributions of shell length showed unimodal patterns from March to August 1989. The binodal pattern after September 1989 indicated a recruitment of young clams during this period. The density fluctuated irregularly, but showed a decreasing pattern over time on the whole. The density of the year class 1989 increased markedly after February 1990. The growth in shell length showed three phases during a year, a fast growth phase in spring, a slow growth phase in summer and autumn, and a lag phase in winter. The annual increment in shell length reduced with age. The flesh dry weight showed a peak in late spring just before the spawning period, and another peak in autumn. The length of annuli and the back-calculated flesh dry weight were used to describe the annual growth. The growth in shell length fitted to the von Bertalanffy model and the flesh dry weight to the Gompertz model. The absolute growth rate of the shell length reduced gradually with age. The year class 1985 had the highest L, and the yeat class 1986 the lowest L. The annual growth in weight showed a typical sigmoid curve. The growth rate was maximum at the age of 2 to 3. Year classes of 1984 and 1985 had higher values of W and higher absolute growth rates than those of 1986 and 1987. Maximum absolute growth rates of 1986 and 1987 year classes were recorded at younger ages than 1984 and 1985 year classes. The annual relative growth rates of length and weight decreased exponentially with age. Biomass in flesh dry weight increased till spring and thereafter decreased progressively. Maximum biomass was 134.6g m/SUP -2/ in August 1990. The biomass of 1989 yeat class occupied highest proportion in total biomass. Annual production in flesh dry weight from March 1989 to March 1990 was 67.9 g m/SUP -2/ year/SUP -1/. Cumulative production of 1989 year class was highest among all year classes, and that of year class 1984 was lowest. The production is high in spring and autumn, and very low in summer and winter.

• International Journal of Highway Engineering
• /
• v.8 no.4 s.30
• /
• pp.49-62
• /
• 2006

The republic of korea has put a great emphasis on the role of the road as widening a social infra-structural facility. Thus, vast amount of money has been invested on the road establishment. As a result, there has been fruitful outcomes in establishing the road system of the nation especially for the flat road with ease. However, in order to have more systematic and sustainable road system, we should turn our attention to more painful and high-cost regions such as mountainous districts and those are to be developed effectively. The configuration of the road is an important factor to be considered in making a decision for the road planning. Nevertheless, current road planning criterion has no such clarified and objective judging standard for figuring the configuration of the road out and, as a result, speed planning can be decided incorrectly. our research has acknowledged the necessity of estimating the configuration of the road and aimed to make it organized and sorted according to the height, slope, and the vehicle's speed. The results are as follows. First, our research made use of GIS data and classified the road into 9 different areas according to the height and the slope. Also, road classification being matched to the data of vehicle's speed, it has been shown that those characteristics of different areas have made an influence on vehicle's speed. Secondly, based on the results of the similarity between geographical classification and, vehicle's speed of sorted groups according to the height and the slope, conclusively we have classified as flat, rolling region and mountain. Since our research has made use of vehicle's speed for National Highway, it is not applicable to different functional highways. However, for the highway to be established hereafter, it can be a standard for reflection geographical characteristics.

• Korean journal of applied entomology
• /
• v.42 no.1
• /
• pp.1-7
• /
• 2003

Morphological characteristics, developmental period, and seasonal occurrence of Adeia leucomelas (L.) were investigated from 1999 to 2000. In addition, consumption of sweetpotato as food was also examined. Adults of A. leucomelas were dark-brown and body lengths of females and males were 20.2 mm and 18.9 mm, respectively, Wing expanse of female and male was 33.7 mm and 29.4mm, respectively. Egg was flat round-shape. Larva was light yellow-green to dark-brown with 3.3-53.5 mm. Pupa was deep-brown and 15.1 mm in length. Developmental periods of A. leucomelas from egg to adult emergence at different temperatures of 15, 20, 25, and 30$^{\circ}$C were 108.5, 70.7, 40.2, and 29.1 days, respectively, Developmental threshold (DT) and effective accumulative temperatures were estimated as 10.7$^{\circ}$C and 67.5 DD in egg stage, 11.0$^{\circ}$C and 275.1 DD in larval stage and 9.3$^{\circ}$C and 244.6 DD in pupal stage, respectively. The longevity of adult female was shortened with increment of temperature, whereas the total numbers of eggs laid by a female were increased. The larvae of A.leucomelas occurred from mid-June to early October, and population reached its peak during early to mid-September in Jeonbuk province. Food consumption of A. leucomelas was highest at 20-25$^{\circ}$C. Food consumption of 1 st, 2nd, 3rd, 4th, and 5th larvae of A. leucomelas per day at 25$^{\circ}$C was 0.4, 3.6, 19.6, 40.7, and 78.9 $\textrm{cm}^2$, respectively.

• Restorative Dentistry and Endodontics
• /
• v.30 no.6
• /
• pp.493-504
• /
• 2005

This study was performed to investigate the compatibility between 4 dentin adhesives and 4 resin luting cements. Dentin adhesives used in this study were All-Bond 2 (Bisco Inc., Schaumbrug, IL, USA), Clearfil SE-Bond (Kuraray Medical Inc, Osaka, Japan), Prompt L-Pop (3M Dental Products, St. Paul, MN, USA), One-Up Bond F (Tokuyama corp., Tokyo, Japan) Resin luting cements used in this study were Choice (Bisco Inc., Schaumbrug, IL, USA), Panavia F (Kuraray Medical Inc, Osaka, Japan), RelyX ARC (3M Dental Products, St. Paul, MN, USA) Bistite II DC (Tokuyama corp., Tokyo, Japan). Combination of each dentin adhesive and corresponding resin cement was made to 16 experimental groups. Flat dentin surfaces was created on mid-coronal dentin of extracted mandibular third molars, then dentin surface was polished with 320-grit silicon carbide abrasive papers. Indirect resin composite block (Tescera, Bisco) was fabricated. Its surface for bonding to tooth was polished with silicon carbide abrasive papers Each dentin adhesive was treated on tooth surface and resin composite overlay were luted with each resin cement. Each bonded specimen was poured in epoxy resin and sectioned occluso-gingivally into 1.0mm thick slab, then further sectioned into $1.0{\times}1.0mm^2$ composite-dentin beams. Microtensile bond strength was tested at a crosshead speed of 1.0mm/min. The data were analysed by one-way ANOVA and Duncan's multiple comparison tests The results of this study were as follows, 2-step self-etching dentin adhesive which has additional bonding resin is more comparison than tests. self-etching dentin adhesive.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.1
• /
• pp.131-141
• /
• 2011

This study, as a purpose of base study for landscape redevelopement of Seowon, pointed out problems of planting patterns in each sector and suggested an alternative through analyzing old literature, complete enumeration survey in each sector and taking aerial images. the conclusions drawn from this study are as follows. A Pilam Seowon(historic site no 242) is located in a Pyungya-Sanrok(plain and mountain) district in Jangsung-gun and has Junhak-Humyo(Study room in the front and Shirne in the back) type. 23 taxonomic group of arbor, 6 taxonomic group of shrub and 5 taxonomic group of flowers are planted high-densitily in limited flat surface. It can be classified into being planted by family and being planted through landscape redevelopement in 1980s. Korean traditional trees are planted in this area like Pinus densiflora, Juniperus chinensis L., Thuja orientalis L., Zelkova serrato Makino, Sophora japonica L., Lagerstroemia indica, Prunus mume include Ginkgo biloba which is old big tree and is registered in Jangsung-gun as protected trees. The tea tree in this area was introduced from wild tea plantation in Yonhwa moutain and was planted. From now on, we have to pay consideration a form management of planted trees in the historical area, rearrangement of plant density due to over planting, removal of alien trees like Pinus bungeana and Canna generalisa, prevention a dwarfishness of main area due to over planting in outside facilities, recovery a alienation among each planting area, and planting concept from plants drawings on wall of buildings can be suggested. The implications of this case study is that introduction of over planting can make more problems like losing sense of place. Therefore, we must do a actual state survey on traditional landscape area like Seowon from preservation point of view.

• The Journal of Advanced Prosthodontics
• /
• v.15 no.5
• /
• pp.238-247
• /
• 2023

PURPOSE. The purpose of this study was to assess the effect of resin cement shade on the color of different novel ultratranslucent monolithic zirconia and lithium disilicate veneer materials. MATERIALS AND METHODS. For a total of 40 specimens, flat cylindrical discs with a 9-mm diameter and 0.5-mm thickness were created using CAD/CAM technology. The specimens were divided into five groups according to their material (n = 8) (e.max, Prettau, Aidite, Shofu and Dima) using A1 shade. Resin discs with the same diameter and shade as the specimens served as tooth-colored substructures. Three shades (neutral, light and warm) of resin cement try-in pastes (Variolink Esthetic LC) were used as the luting cement material. The color of each material group was measured before and after cementation using the three cement shades, and the CIE L^*a^*b^* coordinates were obtained with a spectrophotometer. Values for the translucency parameter (TP) and color change delta E (E) before (baseline) and after cementation of each specimen were determined. To compare differences among the material groups within each shade of cement and among various shades of cement within each material, the data were analyzed using one-way ANOVA and post hoc testing. RESULTS. Color coordinates L^*, a^* and b^* significantly changed after the application of try-in pastes relative to baseline values, with a noticeable decrease in lightness (L^*) (P < .05). A significant color change (ΔE) was observed in all tested materials after cementation, with ΔE values exceeding 3.3 (P < .05). Although TP changed after cementation for most materials tested, these changes were not statistically significant (P > .05). Shofu and Dima ceramics showed the lowest TP values, while Aidite and Prettau showed the highest TP values. For e.max, translucency decreased after cementation with neutral and warm shades, and it significantly increased after cementation with a light shade. CONCLUSION. The shade of cement significantly altered the final color of the ceramic veneer material to a level above the threshold at which the clinical perception of color change occurred (> 3.3). The TP was not influenced by the cement shade. The translucency levels of the novel ultratranslucent multilayer monolithic zirconia ceramics Aidite and Prettau were higher than that of the lithium disilicate e.max material.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.1
• /
• pp.15-24
• /
• 2003

The purpose of this study is to investigate the sterilization effect of Er:YAG laser against the intraoral acid producing bacterium, S. mutans, by irradiating the culture solution containing S. mutans KCTC 3065 with Er:YAG laser having a $650{\mu}m$ diameter beam through the non-contact method. We obtained the following results after examining the temperature changes of the culture solution, numbers of bacterial colonies, and acid-producing ability and attaching ability on teeth by measuring the amount of extracellular polysaccharide produced by S. mutans. The number of bacterial colony was decreased in $10{\mu}l$ culture solution irradiated with laser in overall compared to the control solution. The number decreased as the irradiation intensity and pulse repetition rate were larger and as the exposure time was increased. However, it did not change significantly in $100{\mu}l$ culture solution compared to the control solution. Although the acid-producing ability of S. mutans was inhibited for a certain duration after laser irradiation in 10r1 bacterial culture solution, it did not change in $100{\mu}m$ solution compared with the control solution. The amount of extracellular polysaccharide synthesized by S. mutans was partially decreased through laser irradiation in $10{\mu}m$ culture solution but did not change in $100{\mu}m$ culture solution. Based on these findings, we concluded that Er:YAG laser has an sterilization effect on S. mutans in which we presume that the mechanism is through the heat effect rather than the mechanical effect from development of ultrasound.