DOI QR코드

DOI QR Code

Influences of luting cement shade on the color of various translucent monolithic zirconia and lithium disilicate ceramics for veneer restorations

  • Received : 2023.06.16
  • Accepted : 2023.10.25
  • Published : 2023.10.31

Abstract

PURPOSE. The purpose of this study was to assess the effect of resin cement shade on the color of different novel ultratranslucent monolithic zirconia and lithium disilicate veneer materials. MATERIALS AND METHODS. For a total of 40 specimens, flat cylindrical discs with a 9-mm diameter and 0.5-mm thickness were created using CAD/CAM technology. The specimens were divided into five groups according to their material (n = 8) (e.max, Prettau, Aidite, Shofu and Dima) using A1 shade. Resin discs with the same diameter and shade as the specimens served as tooth-colored substructures. Three shades (neutral, light and warm) of resin cement try-in pastes (Variolink Esthetic LC) were used as the luting cement material. The color of each material group was measured before and after cementation using the three cement shades, and the CIE L*a*b* coordinates were obtained with a spectrophotometer. Values for the translucency parameter (TP) and color change delta E (E) before (baseline) and after cementation of each specimen were determined. To compare differences among the material groups within each shade of cement and among various shades of cement within each material, the data were analyzed using one-way ANOVA and post hoc testing. RESULTS. Color coordinates L*, a* and b* significantly changed after the application of try-in pastes relative to baseline values, with a noticeable decrease in lightness (L*) (P < .05). A significant color change (ΔE) was observed in all tested materials after cementation, with ΔE values exceeding 3.3 (P < .05). Although TP changed after cementation for most materials tested, these changes were not statistically significant (P > .05). Shofu and Dima ceramics showed the lowest TP values, while Aidite and Prettau showed the highest TP values. For e.max, translucency decreased after cementation with neutral and warm shades, and it significantly increased after cementation with a light shade. CONCLUSION. The shade of cement significantly altered the final color of the ceramic veneer material to a level above the threshold at which the clinical perception of color change occurred (> 3.3). The TP was not influenced by the cement shade. The translucency levels of the novel ultratranslucent multilayer monolithic zirconia ceramics Aidite and Prettau were higher than that of the lithium disilicate e.max material.

Keywords

Acknowledgement

The authors would like to thank the College of Dentistry Research Center at King Saud University for facilitating the project and providing physical laboratory to run the experiment.

References

  1. Gresnigt MMM, Cune MS, Jansen K, van der Made SAM, Ozcan M. Randomized clinical trial on indirect resin composite and ceramic laminate veneers: Up to 10-year findings. J Dent 2019;86:102-9. https://doi.org/10.1016/j.jdent.2019.06.001
  2. Zhang Y, Lawn BR. Novel Zirconia Materials in Dentistry. J Dent Res 2018;97:140-7. https://doi.org/10.1177/0022034517737483
  3. Nogueira AD, Della Bona A. The effect of a coupling medium on color and translucency of CAD-CAM ceramics. J Dent 2013;41 Suppl 3:e18-23. https://doi.org/10.1016/j.jdent.2013.02.005
  4. Alrabeah G, Shabib S, Almomen R, Alhedeithi N, Alotaibi S, Habib SR. Effect of home bleaching on the optical properties and surface roughness of novel aesthetic dental ceramics. Coatings 2023;13:330.
  5. El-Sayed SM, Basheer RR, Bahgat SF. Color stability and fracture resistance of laminate veneers using different restorative materials and techniques. Egypt Dent J 2016;62:1-15.
  6. Adel E, Al-Zordk W, Hasouna M, Elsherbini A, Sakrana AA. Color stability and translucency of ceramic laminate veneer restoration for diastema closure: Effect of resin cement containing different photoinitiators. 2022. preprint.
  7. Tabatabaian F, Khaledi Z, Namdari M. Effect of ceramic thickness and cement type on the color match of high-translucency monolithic zirconia restorations. Int J Prosthodont 2021;34:334-40. https://doi.org/10.11607/ijp.6457
  8. Miura S, Tsukada S, Fujita T, Isogai T, Teshigawara D, Saito-Murakami K, Asami K, Fujisawa M. Effects of abutment tooth and luting agent colors on final color of high-translucent zirconia crowns. J Prosthodont Res 2022;66:243-9. https://doi.org/10.2186/jpr.JPR_D_21_00025
  9. Ayash G, Osman E, Segaan L, Rayyan M, Joukhadar C. Influence of resin cement shade on the color and translucency of zirconia crowns. J Clin Exp Dent 2020;12:e257-63. https://doi.org/10.4317/jced.56425
  10. Comba A, Paolone G, Baldi A, Vichi A, Goracci C, Bertozzi G, Scotti N. Effects of substrate and cement shade on the translucency and color of CAD-CAM lithium-disilicate and zirconia ceramic materials. Polymers (Basel) 2022;14:1778.
  11. Bayindir F, Koseoglu M. The effect of restoration thickness and resin cement shade on the color and translucency of a high-translucency monolithic zirconia. J Prosthet Dent 2020;123:149-54. https://doi.org/10.1016/j.prosdent.2018.11.002
  12. Alrabeah G, Habib SR, Alamro NM, Alzaaqi MA. Evaluation of the effect of electronic cigarette devices/vape on the color of dental ceramics: an in vitro investigation. Materials (Basel) 2023;16:3977.
  13. Hardan L, Bourgi R, Cuevas-Suarez CE, Lukomska-Szymanska M, Monjaras-Avila AJ, Zarow M, Jakubowicz N, Jorquera G, Ashi T, Mancino D, Kharouf N, Haikel Y. Novel trends in dental color match using different shade selection methods: a systematic review and meta-analysis. Materials (Basel) 2022;15:468.
  14. Funt BV, Roshan E. Metamer mismatching underlies color difference sensitivity. J Vis 2021;21:11.
  15. Lindsey DT, Wee AG. Perceptibility and acceptability of CIELAB color differences in computer-simulated teeth. J Dent 2007;35:593-9. https://doi.org/10.1016/j.jdent.2007.03.006
  16. Heffernan MJ, Aquilino SA, Diaz-Arnold AM, Haselton DR, Stanford CM, Vargas MA. Relative translucency of six all-ceramic systems. Part I: core materials. J Prosthet Dent 2002;88:4-9. https://doi.org/10.1067/mpr.2002.126794
  17. Ban S. Classification and properties of dental zirconia as implant fixtures and superstructures. Materials (Basel) 2021;14:4879.
  18. Ziyad TA, Abu-Naba'a LA, Almohammed SN. Optical properties of CAD-CAM monolithic systems compared: three multi-layered zirconia and one lithium disilicate system. Heliyon 2021;7:e08151.
  19. Carrabba M, Keeling AJ, Aziz A, Vichi A, Fabian Fonzar R, Wood D, Ferrari M. Translucent zirconia in the ceramic scenario for monolithic restorations: A flexural strength and translucency comparison test. J Dent 2017;60:70-6. https://doi.org/10.1016/j.jdent.2017.03.002
  20. Baldissara P, Wandscher VF, Marchionatti AME, Parisi C, Monaco C, Ciocca L. Translucency of IPS e.max and cubic zirconia monolithic crowns. J Prosthet Dent 2018;120:269-75. https://doi.org/10.1016/j.prosdent.2017.09.007
  21. Kim HK. Optical and mechanical properties of highly translucent dental zirconia. Materials (Basel) 2020;13:3395.
  22. Czigola A, Abram E, Kovacs ZI, Marton K, Hermann P, Borbely J. Effects of substrate, ceramic thickness, translucency, and cement shade on the color of CADCAM lithium-disilicate crowns. J Esthet Restor Dent 2019;31:457-64. https://doi.org/10.1111/jerd.12470
  23. Carrabba M, Vichi A, Tozzi G, Louca C, Ferrari M. Cement opacity and color as influencing factors on the final shade of metal-free ceramic restorations. J Esthet Restor Dent 2022;34:423-9. https://doi.org/10.1111/jerd.12587
  24. Espindola-Castro LF, Brito OFF, Araujo LGA, Santos ILA, Monteiro GQM. In vitro evaluation of physical and mechanical properties of light-curing resin cement: a comparative study. Eur J Dent 2020;14:152-6. https://doi.org/10.1055/s-0040-1705075
  25. Ilie N. Impact of light transmittance mode on polymerisation kinetics in bulk-fill resin-based composites. J Dent 2017;63:51-9. https://doi.org/10.1016/j.jdent.2017.05.017
  26. Mazzitelli C, Paolone G, Sabbagh J, Scotti N, Vichi A. Color stability of resin cements after water aging. Polymers (Basel) 2023;15:655.
  27. Kilinc H, Sanal FA. Effect of sintering and aging processes on the mechanical and optical properties of translucent zirconia. J Prosthet Dent 2021;126:129.e1-129.e7. https://doi.org/10.1016/j.prosdent.2021.03.024
  28. Li S, Wang Y, Tao Y, Liu Y. Effects of surface treatments and abutment shades on the final color of high-translucency self-glazed zirconia crowns. J Prosthet Dent 2021;126:795.e1-795.e8. https://doi.org/10.1016/j.prosdent.2021.09.010