• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 총회 및 춘계학술발표회
• /
• pp.322-325
• /
• 2003

The feasibility of treating 2-chlorophenol (2CP) contaminated soils with ozone venting was investigated in this research. Adding ozone to the existing air-venting process provides an alternative to achieve a complete in-situ treatment by oxidizing the contaminant in the process. A column study with artificial soil was used to simulate the venting process. Ozone concentrations at 2.4, 7.6 and 19.4 mg/L, and flow rates at 100 and 150 mL/min were used. The reaction times were 10, 20, 50, and 60 minutes. Blank samples using air venting were also run for comparison. It is obvious that ozone-venting had a much faster removal rate than air-venting. As higher concentration of ozone is applied, the reaction rate increased significantly. As higher concentration was applied, the flux of ozone to the liquid film increased. This also increased the removal rate of 2CP and therefore the breakthrough curve came out earlier.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1995년도 추계학술대회 학술발표 논문집
• /
• pp.15-24
• /
• 1995

This paper describes a system that can be used to recognize an unknown material regardless of the fuzzy neural network(FNN). There are some problems to realize the recognition system using temperature response. It requires too many memories to store the vast temperature response data and it has to be filtered to remove noise which occurs in experiment. And the temperature response is influenced by the change of ambient temperature. So, this paper proposes a practical method using curve fitting to remove above problems of memories and noise. and FNN is proposed to overcome the problem caused by the change of ambient temperature. Using the FNN which is learned by temperature responses on fixed ambient. Temperatures and known thermal conductivity, the thermal conductivity of the material can be inferred on various ambient temperatures. So the material can be recognized by the thermal conductivity.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전력기술부문
• /
• pp.255-258
• /
• 2003

In this paper there are different methods used to study the voltage stability, such as the P-V curve method. Jacobian method and the voltage collapse proximity indicator(L-index) method. The P-V curve method is to check operating margin from the maximum operating point. The Jacobian method is to check the eigenvalue or the minimum singular value of the load flow Jacobian matrix. If the power system is unstable, one of the eigenvalues, at least, has crossed the imaginary axis. The L-index method is to quantify how to close a particular operating point. This paper describes these methods to select the best location of FACTS and demonstrate the effectiveness of STATCOM of voltage stability on the IEEE 9-bus system.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권1호
• /
• pp.175-185
• /
• 2014

This study presents the prediction of propagated wave profiles using the wave information at a fixed point. The fixed points can be fixed in either space or time. Wave information based on the linear wave theory can be expressed by Fredholm integral equation of the first kinds. The discretized matrix equation is usually an ill-conditioned system. Tikhonov regularization was applied to the ill-conditioned system to overcome instability of the system. The regularization parameter is calculated by using the L-curve method. The numerical results are compared with the experimental results. The analysis of the numerical computation shows that the Tikhonov regularization method is useful.

• Nonlinear Functional Analysis and Applications
• /
• 제26권2호
• /
• pp.225-236
• /
• 2021

In this paper, we determine position vector of a line of curvature of a regular surface which is relatively normal-slant helix, with respect to Darboux frame. Then, a vector differential equation is established by means Darboux formulas, in the case of the geodesic torsion is vanishes. In terms of solution, we determine the parametric representation of a line of curvature which is relatively normal-slant helix, with respect to standard frame in Euclidean 3-space. Thereafter, we apply this result to find the position vector of a line of curvature which is isophote curve.

• Journal of Ginseng Research
• /
• 제44권4호
• /
• pp.611-618
• /
• 2020

Background: It is well recognized that gut microbiota is involved in the biotransformation of ginsenosides by converting the polar ginsenosides to nonpolar bioactive ginsenosides. However, the roles of the gut microbiota on the pharmacokinetics of ginsenosides in humans have not yet been fully elucidated. Methods: Red ginseng (RG) or fermented red ginseng was orally administered to 34 healthy Korean volunteers, and the serum concentrations of the ginsenosides were determined using liquid chromatography-tandem mass spectrometry. In addition, the fecal ginsenoside Rd- and compound K (CK)eforming activities were measured. Then, the correlations between the pharmacokinetic profiles of the ginsenosides and the fecal ginsenoside-metabolizing activities were investigated. Results: For the RG group, the area under the serum concentratione-time curve values of ginsenosides Rd, F2, Rg3, and CK were 8.20 ± 11.95 ng·h/mL, 4.54 ± 3.70 ng·h/mL, 36.40 ± 19.68 ng·h/mL, and 40.30 ± 29.83 ng·h/mL, respectively. For the fermented red ginseng group, the the area under curve from zero to infinity (AUC_∞) values of ginsenosides Rd, F2, Rg3, and CK were 187.90 ± 95.87 ng·h/mL, 30.24 ± 41.87 ng·h/mL, 28.68 ± 14.27 ng·h/mL, and 137.01 ± 96.16 ng·h/mL, respectively. The fecal CK-forming activities of the healthy volunteers were generally proportional to their ginsenoside Rd-eforming activities. The area under the serum concentration-time curve value of CK exhibited an obvious positive correlation (r = 0.566, p < 0.01) with the fecal CK-forming activity. Conclusion: The gut microbiota may play an important role in the bioavailability of the nonpolar RG ginsenosides by affecting the biotransformation of the ginsenosides.

• Clinical and Experimental Pediatrics
• /
• 제57권10호
• /
• pp.451-456
• /
• 2014

Purpose: We evaluated serum procalcitonin (PCT) as a diagnostic marker of neonatal sepsis, and compared PCT levels with C-reactive protein (CRP) levels. Methods: We retrospectively reviewed the medical records of 269 neonates with a suspected infection, admitted to Wonkwang University School of Medicine & Hospital between January 2011 and December 2012, for whom PCT and CRP values had been obtained. Neonates were categorized into 4 groups according to infection severity. CRP and PCT values were analyzed and compared, and their effectiveness as diagnostic markers was determined by using receiver operating characteristic (ROC) curve analysis. We also calculated the sensitivity, specificity, and positive, and negative predictive values. Results: The mean PCT and CRP concentrations were respectively $56.27{\pm}81.89$ and $71.14{\pm}37.17mg/L$ in the "confirmed sepsis" group; $15.64{\pm}32.64$ and $39.23{\pm}41.41mg/L$ in the "suspected sepsis" group; $9.49{\pm}4.30$ and $0.97{\pm}1.16mg/L$ in the "mild infection" group; and $0.21{\pm}0.12$ and $0.72{\pm}0.7mg/L$ in the control group. High concentrations indicated greater severity of infection (P<0.001). Five of 18 patients with confirmed sepsis had low PCT levels (<1.0 mg/L) despite high CRP levels. In the ROC analysis, the area under the curve was 0.951 for CRP and 0.803 for PCT. The cutoff concentrations of 0.5 mg/L for PCT and 1.0 mg/L for CRP were optimal for diagnosing neonatal sepsis (sensitivity, 88.29% vs. 100%; specificity, 58.17% vs. 85.66%; positive predictive value, 13.2% vs. 33.3%; negative predictive value, 98.6% vs. 100%, respectively). Conclusion: PCT is a highly effective early diagnostic marker of neonatal infection. However, it may not be as reliable as CRP.

• Journal of Korean Neurosurgical Society
• /
• 제51권1호
• /
• pp.20-23
• /
• 2012

Objective : To compare radiographic analysis on the sagittal lumbar curve when standing, sitting on a chair, and sitting on the floor. Methods : Thirty asymptomatic volunteers without a history of spinal pathology were recruited. The study population comprised 11 women and 19 men with a mean age of 29.8 years. An independent observer assessed whole lumbar lordosis (WL) and segmental lordosis (SL) between L1 and S1 using the Cobb's angle on lateral radiographs of the lumbar spine obtained from normal individuals when standing, sitting on a chair, and sitting on the floor. WL and SL at each segment were compared for each position. Results : WL when sitting on the floor was reduced by 72.9% than the average of that in the standing position. Of the total decrease in WL, 78% occurred between L4 to S1. There were significant decreases in SL at all lumbar spinal levels, except L1-2, when sitting on the floor as compared to when standing and sitting on a chair. Changes in WL between the positions when sitting on a chair and when sitting on the floor were mostly contributed by the loss of SL at the L4-5 and L5-S1 levels. Conclusion : When sitting on the floor, WL is relatively low; this is mostly because of decreasing lordosis at the L4-5 and L5-S1 levels. In the case of lower lumbar fusion, hyperflexion is expected at the adjacent segment when sitting on the floor. To avoid this, sitting with a lordotic lumbar curve is important. Surgeons should remember to create sufficient lordosis when performing lower lumbar fusion surgery in patients with an oriental life style.

• 대한기계학회논문집A
• /
• 제37권4호
• /
• pp.581-587
• /
• 2013

반경이 작은 곡선이 종종 존재하는 도시 내에서 운행되는 도시형자기부상열차는 전자석과 레일 사이에 기계적 접촉 없이 곡선주행을 할 수 있어야 한다. 특히, 안내제어가 없는 자기부상열차에 있어서는 승차감을 확보하면서 곡선추종성능을 향상시키기 위하여 차간 댐퍼의 설치가 고려된다. 자기부상 차량용 차간 댐퍼는 곡선 진출입시 차량에 발생하는 요(Yaw) 방향의 진동을 최소화할 수 있어야 함과 동시에, 부상 전자석이 레일과 접촉이 없도록 해야 한다. 본 논문에서는 곡선주행에서의 차간 댐퍼의 승차감과 곡선추종성에의 영향을 분석하는데 목적이 있다. 이를 위하여 부상제어, 차량, 대차 및 궤도가 포함된 동역학 모델을 이용한 동특성 시뮬레이션이 수행된다. 시뮬레이션을 통하여 차간 댐퍼의 효과가 분석되고 시험 선로에서의 주행시험을 실시하여 해석 결과의 신뢰성에 대한 검증이 이루어졌다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제7권4호
• /
• pp.91-97
• /
• 2003

연속교의 내측지점에는 최대모멘트가 발생한다. 보다큰 모멘트가 작용하면 내측지점에 국부적 항복이 발생할 수 있고 소성거동을 하면서 모멘트를 재분배 시킨다. 강도설계법인 LFD방법은 탄성해석으로부터 구한 부모멘트의 10%를 막연히 재분배 시켜주고 있다. 그러나 ALFD방법은 내측지점에서 국부항복에 의하여 발생되는 모멘트를 계산하여 설계에 반영하도록 하고있다. 이러한 국부항복에 의하여 발생되는 모멘트를 자생 모멘트라 한다. 자생모멘트를 구하기 위해서는 모멘트-비탄성회전각곡선이 필요하다. 본 논문에서는 조밀단면에서 AASHTO 지침시방서에서 제시한 모멘트-비탄성회전곡선을 아용하여 자생모멘트를 구하였다. 또한 ALFD 한계상태 규준을 적용하여 3경간 연속합성교를 설계하였다.