• KSBB Journal
• /
• 제5권2호
• /
• pp.167-173
• /
• 1990

Acetobacter aceti OLS-130cell을 Ca-alginate gel에 고정시킨 후 유동층 반응기를 이용한 연속적인 식초생산 가능성을 검토하였다. Working volume 2L규모의 유동층 반응기를 사용한 회분식발효를 발효온도 3$0^{\circ}C$, 통기량 1.0VVM에서 초기 ethanol 및 초산농도 3g/l와 27g/l에서 수행한 결과 free cell인 경우 발효 80시간 경과 후 23g/l의 초산이 생성되었으며, 이때 overall productivity는 0.31g/l-hr였고, 고정화 초산균의 bead를 250g/l로 하여 발효를 수행한 결과는 발효 48시간 경과 후 23g/l의 초산이 생성되어 overal productivity는 0.48g/l-hr로서 free cell일 때보다 약 1.5배 높았다. 위의 초산발효조건에서 배양 48시간 이후부터 연속발효를 실시한 결과 배양 90일까지 초산함량 50~55g/l의 식초를 연속적으로 생산하는 것이 가능하였으며, 이때 dilution rate는 $0.12hr^-1$로서 초산생산성은 약 2.76g/l-hr로 최대값을 유지하였으며 회분식 발효에서 free cell인 경우보다는 초산생산성이 약 8.9배, 고정화 세포인 경우보다 약 5. 8배 더 높았다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권4호
• /
• pp.550-555
• /
• 2007

The aim of this study was to determine the effect of two lighting programs (continuous lighting (CL) 24L:0D and intermittent lighting (IL) 1L:3D) on the broiler performance, carcass traits, incidence of tibial dyschondroplasia (TD), relative asymmetry (RA), duration of induced tonic immobility (TI), heterophils-lymphocytes ratio (H/L), serum glucose, cholesterol and triglyceride levels. The chicks were randomly divided into 2 treatment groups consisting of 100 chicks per treatment, continuous lighting (CL) 24L:0D or intermittent lighting (IL) 1L:3D. Each treatment consists of 5 replicates of 20 chicks. The experimental period was 6 weeks. Use of IL decreased feed to gain ratio, improved immune response and reduced fearful. Body weight, carcass traits, TD and stress parameters (organ weights, RA, H/L, glucose, cholesterol and triglyceride levels) were not significant in different lighting groups. As a result IL was beneficial for producers and chickens than CL.

• 공업화학
• /
• 제19권4호
• /
• pp.366-369
• /
• 2008

입자상 알루미늄 충전복극조의 성능을 파악할 목적으로 실험은 회분식과 연속식으로 진행하였다. 입자상 알루미늄 충전복극조를 이용하여 T-P 농도 10 mg/L인 인산염 함유 용액을 6 V에서 3 h 회분식으로 전해처리 한 결과 T-P의 제거율은 88% 이었다. 입자상 알루미늄 충전복극조를 이용하여 T-P 농도 10 mg/L인 인산염 함유 용액을 6 V에서 HRT를 3 h으로 하여 연속식으로 전해처리 한 결과 T-P의 농도는 2 mg/L이었다. HRT 3 h으로 고정하여 전해처리 할 경우 120 h 처리 후 파과점을 관찰할 수 있었다.

• 한국염색가공학회지
• /
• 제8권5호
• /
• pp.84-89
• /
• 1996

This study carried out batch and continuous experiments using calcium hydroxide as neutralization agent and immobilization media for removing the ethylene glycol in the pretreated polyester weight loss wastewater. The $TCOD_{Mn}$ concentration in the treated wastewater using culture of iramobilization and suspension for the synthetic wastewater were found as 650mg/l and 1,250mg/l after 48hours, respectively. SVI(Sludge Volume Index) and $TCOD_{Mn}$ concentration were 74 and 73mg/l at optimum F/M ratio, 1.32kg-TCO $D_{Mn}$ /day. kg-MLVSS. The $TCOD_{Mn}$ concentration and removal efficiency were 213mg/l and 93.5% by continuous experiments in the air-lift bioreactor, respectively. The $TCOD_{Mn}$ concentration was 82mg/l, and also the MLVSS concentration was 2,550mg/l, when the volumetric loading rate was 3.04kg-$TCOD_{Mn}/m^{2}$ day for real polyester weight loss wastewater.

• Membrane and Water Treatment
• /
• 제12권2호
• /
• pp.83-93
• /
• 2021

In this study, defluoridation efficiency by aluminium sulphate (alum) and polyaluminium chloride (PACl) were compared for recommended Nalgonda dose (100%) and 80% of this dose in both batch and continuous modes. The residual turbidity was found to be higher in case of alum as compared to PACl with 80% dose representing lesser efficient settling of suspensions, which primarily comprise alumino-fluoro complexes that result in high residual aluminium in the treated water and this was confirmed by TEM and Zeta analysis. Moreover, the application of PACl also resulted in much lesser addition to the TDS and also required lesser lime for pH compensation due to its lower acidity. Hence this reduced dose was recommended for defluoridation. It was also observed that in case of alum, residual aluminium in treated water was 0.88 mg/L (100% dose) & 0.72 mg/L (80% dose) and in case of PACl, it was 0.52 mg/L(100% dose) & 0.41 mg/L(80% dose). After subsequent microfiltration, residual aluminium was 0.28 & 0.21 mg/L for 100% & 80% dose respectively and in case of alum and in case of PACl, it was 0.16 & 0.11 for 100% & 80% dose respectively, which conform to the Al standards(<0.2 mg/L).

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제19권5호
• /
• pp.271-276
• /
• 2019

Background: The Child Oral Health Impact Profile (COHIP) is a measure of oral health-related quality of life (OHRQoL) in children and adolescents. This study examined the impact of dental fear on the OHRQoL by comparing the COHIP scores of children with and without dental fear. Methods: The OHRQoL in children and adolescents was measured using the Korean version of the COHIP. In total, 102 students (49 boys and 53 girls) filled in a questionnaire designed to evaluate dental fear and the OHRQoL in 2012 and 2014. Results: In 2012, the group without dental fear showed higher COHIP scores than the group with dental fear; the difference between the two groups was statistically significant. In 2014, the same pattern was observed, but the difference was non-significant for all COHIP items other than those pertaining to social-emotional well-being. Comparison of COHIP scores according to changes in fear showed that the group with continuous dental fear showed significantly lower overall COHIP, negative COHIP, and low social-emotional wellbeing scores, than the group without continuous fear in 2012 and 2014. Conclusion: We expected children with dental fear to have poor oral health, affecting their OHRQoL; however, dental fear did not affect the OHRQoL.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제6권1호
• /
• pp.6-10
• /
• 2001

The production of chitosan from the mycelia of Absidia coerulea was studied to improve cell growth and chitosan productivity. Culture conditions were optimized in batch cultivation (pH 4.5, agitator speed of 250 rpm, and aeration rate of 2 vvm) and the maximum chitosan concentration achieved was 2.3g/L under optimized conditions. Continuous culture was carried out successfully by the formation of new growth spots under optimized conditions, with a chitosan productivity of 0.052g/L(sup)-1 h(sup)-1, which is the highest value to date, and was obtained at a dulution rate of 0.05h(sup)-1. Cell chitosan concentrations reached about 14% in the steady state, which is similar to that achieved in batch culture. This study shows that for the continuous culture of Absidia coerulea it is vital to control the medium composition.

• Journal of Microbiology and Biotechnology
• /
• 제17권9호
• /
• pp.1533-1537
• /
• 2007

In this study, in order to develop a continuous production process of lactosucrose in a packed-bed reactor, Sterigmatomyces elviae ATCC 18894 was selected and mutated. The mutant strain of S. elviae showed 54.3% higher lactosucrose production than the wild type. Reaction conditions such as temperature, pH, substrate concentration and flow rate were also optimized. Under optimized reaction conditions ($50^{\circ}C$, pH 6.0, 25% sucrose and 25% lactose as substrate, flow rate 1.2 ml/min), the maximum concentration of lactosucrose (192 g/l) was obtained. In a packed-bed reactor, continuous production of lactosucrose was performed using S. elviae mutant immobilized in calcium alginate, and about 180 g/l of lactosucrose production was achieved for 48 days.

• 생명과학회지
• /
• 제14권1호
• /
• pp.167-173
• /
• 2004

Lactobacillus brevis BH-21의 균체를 고정화하여 column형 reactor를 이용하여 $\gamma$-aminobutyric acid의 연속적 생산을 검토하였다. Lactobacillus brevis BH-21에 의한 $\gamma$-aminobutyric acid 생산조건은 고정화 담체로는 3.0% sodium alginate가 좋았고 직경 2.2 mm의 bead를 사용하여 기질의 주입속도는 10 mL/h이 최적 조건이었다. Lactobacillus brevis BH-21의 고정화 균체와 유리 균체를 사용하여 $\gamma$-aminobutyric acid의 생산을 최적 조건하에서 1, 2, 3, 및 4차 발효 동안 48시간마다 신선한 기질을 주입하면서 비교ㆍ조사한 결과 고정화 균체를 사용 시에 생산량이 더 많았다. Column형 reactor에 의한 연속 발효 시 발효 25일까지 생산이 우수하였고 발효 30일까지는 $\gamma$-aminobutyric acid를 생산할 수 있었다.

• Journal of Microbiology and Biotechnology
• /
• 제18권5호
• /
• pp.908-912
• /
• 2008

To achieve a higher succinic acid productivity and evaluate the industrial applicability, this study used Mannheimia succiniciproducens LPK7 (knock-out: ldhA, pflB, pta-ackA), which was recently designed to enhance the productivity of succinic acid and reduce by-product secretion. Anaerobic continuous fermentation of Mannheimia succiniciproducens LPK7 was carried out at different glucose feed concentrations and dilution rates. After extensive fermentation experiments, a succinic acid yield and productivity of 0.38 mol/mol and 1.77 g/l/h, respectively, were achieved with a glucose feed concentration of 18.0 g/l and $0.2\;h^{-1}$ dilution rate. A similar amount of succinic acid production was also produced in batch culture experiments. Therefore, these optimal conditions can be industrially applied for the continuous production of succinic acid. To examine the quantitative balance of the metabolism, a flux distribution analysis was also performed using the metabolic network model of glycolysis and the pentose phosphate pathway.