• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.9
• /
• pp.873-881
• /
• 2002

In this paper, the rectangular reflector antenna with 8-dipole array for PCS band (1,750 MHz ~ l,870 MHz) and IMT-2000 band(1,885 MHz ~ 2,200 MHz) is designed and the radiation characteristics are analyzed using the method of moments and HFSS(High Frequency Structure Simulator). To verify the analysis results, rectangular reflector antenna with 8-dipole array is fabricated and the calculated results are compared with the measured results. The measured results show good agreement with the calculated results. As a result of measurements, bandwidth(VSWR< 1.5) of 450 MHz is achieved at PCS and IMT-2000 band and gain is 16 dBi. The designed antenna can be used as the base station antenna for PCS/IMT-2000.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.4
• /
• pp.685-694
• /
• 2018

In this paper, we designed and fabricated the frequency mixer, which is the core parts of high frequency head in Ku-band tracking radar. To overcome the problem of single-ended and single-balanced resistive structure, we designed the fine-line structure with balanced mixer, to generate IF signal without distortion in L-band, after receiving the RF signal of the Ku-band. The prototype mixer showed a Noise Figure Max of 6.823dB, Gain of 4.1598~4.676dB and Band Pass of 61MHz in 5 Ku-band samples frequency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2518-2525
• /
• 2015

In this paper, we propose a UWB(Ultra Wide Band) antenna with CPW(Coplanar Waveguide) structure notched the 802.11a(5.15 ~ 5.825 GHz) band by using the U shaped slot. The proposed antenna not only shows Ultra-Wideband characteristic(3.1 ~ 10.6 GHz) suitable for UWB communications but has partially notched-band characteristic to reject 5 GHz WLAN band(5.15 ~ 5.825 GHz). The antenna is designed on an FR-4 substrate of which the dielectric constant is 4.4, and its overall size is $30mm(W){\times}20mm(L){\times}1mm(t)$. Fabricated antenna satisfied $VSWR{\leq}2$ in 3.1 ~ 10.6 GHz except for the band rejection of 5.15 ~ 5.825 GHz. And measured results of gain and radiation patterns characteristics displayed determined for operating bands.

• Journal of Advanced Navigation Technology
• /
• v.18 no.4
• /
• pp.376-380
• /
• 2014

In the present study, oblique L-shaped monopole slot antenna with broadband characteristic is newly proposed. For bandwidth enhancement as well as size reduction, L-shaped slot with two open-terminations on the ground edge is used. The lower part of L-shaped slot comprises oblique form for bandwidth enhancement in low frequency band, whereas its higher part comprise tapered form for its enhancement in high frequency band. The short-circuit terminated microstrip line which is generally known to be more useful for bandwidth enhancement than open-circuit termination is used. The measured impedance bandwidth($S_{11}{\leq}-10dB$) and gain of the fabricated antenna have been observed to be 4.72 GHz (2.28~7 GHz) and more than 3dBi over the passband respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.3A
• /
• pp.303-310
• /
• 2004

In this paper, L-shaped slot antenna for 5.15㎓-5.35㎓ is designed, fabricated. and measured. The prototype consist of four L-shaped slot. To obtain suitable bandwidth, the form layer is inserted between ground plane and substrate. Important parameters in the design are four L-slot length. width, position, air-gap height. and feed Point position. From these parameters optimized, a four L-shaped slot antenna is fabricated and measured. The measured results of the antenna are obtained as follows results. The resonant frequency of the fabrication four L-shaped slot antenna is 5.25㎓, bandwidth for approximately 5％(VSWR＜1.5) and the gain is 8-9㏈i. The experimental far-field patterns are stable across the pass band. The 3dB bandwidth in H-Plane and I-Plane are 69$^{\circ}$and 62$^{\circ}$, respectively.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.1
• /
• pp.41-48
• /
• 2019

This paper deals with the design of the L-band rotary joint, which is a core part of the tracking radar system. The rotary joint is a part that is mounted on the rotating parts of the tracking system antenna, which smoothly transmits RF signals with minimizing signal insertion loss. To improve the insertion loss of rotary joint, 1) dielectric materials, 2) design of distribution ring and 3)dielectric shape are studied. The performance of proposed rotary joint is compared with the conventional product. The prototype rotary joint showed a max insertion loss of 0.68dB, that is improved about 46% compare with conventional product which insertion loss was 1.26dB.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.96-100
• /
• 2001

본 논문에서는 skeleton slot 복사기를 이용하여 GSM 900과 GSM 1800에서 사용할 수 있는 이중대역 안테나를 설계 및 제작하여 측정 결과를 비교 분서하였다. 기본적인 skeleton slot 구조에서는 낮은 밴드의 2배 이상의 주파수에서는 수평 빔폭이 일정치 않고, 정재파비 특성이 불량하였으나, 급전부와 측면 방사부분의 다중경로 형성 및 절곡 구조를 이용하여 이를 해결하였다. 안테나의 크기는 반사판이 190$\times$190(mm), 복사기는 154$\times$106(mm), 높이는 33mm로 하여 현재 서비스 사업자틀이 주로 사용하는 크기로 구성하였다. 구성 재질은 1mm 두께의 알류미늄판을 이용하며, 이를 NCT로 타공 및 절곡하여 제작하였기 때문에 대량 생산 시 단가를 낮출수 있다. 실측결과 900MHz 대역에서 13.7%, 1800MHz 대역에서 16.4%의 -l0dB 반사손실 대역폭을 만족하고, 방사패턴도 대역별로 $\pm$1$^{\circ}$이내의 일정한 양상을 보여 이중대역 안테나로서의 요구를 만족하였다.

• Journal of Advanced Navigation Technology
• /
• v.21 no.2
• /
• pp.193-199
• /
• 2017

In the paper, a dual band-notched monopole antenna is proposed for 2.4 GHz WLAN (2.4 ~ 2.484 GHz) and UWB (3.1 ~ 10.6 GHz) applications. The 3.5 GHz WiMAX band notched characteristic is achived by a pair of L-shaped slots instead of the previous U-shaped slot on the center of the radiating patch, whereas the 7.5 GHz band notched characteristic is achived by C-shaped strip resonator placed near to the microstrip feed line. The measured impedance bandwidth (${\mid}S_{11}{\mid}{\leq}-10dB$) is 8.62 GHz (2.38 ~ 11 GHz) which is sufficient to cover 2.4 GHz WLAN and UWB band, while measured band-notched bandwidths for 3.5 GHz WiMAX and 7.5 GHz bnad are 1.13 GHz (3.15 ~ 4.28 GHz) and 800 MHz (7.2 ~ 8 GHz) respectively. In particular, it has been observed that antenna has a good omnidirectional radiation patterns and higher gain of 2.51 ~ 6.81 dBi over the entire frequency band of interest.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.4
• /
• pp.441-448
• /
• 2012

This paper proposes a multiband Multi-Input Multi-output(MIMO) antenna for universal serial bus(USB) dongle application. The proposed MIMO antenna consists of a modified meander strip line and inverted L stub. The two radiating elements of the MIMO antenna are symmetrically placed with respect to the center of the ground plane. The fabricated antenna satisfied a VSWR below 3 and an efficiency over 35 % in the LTE band 13, 17(704 MHz-787 MHz), DCS/PCS/WCDMA band(1.71 GHz-2.17 GHz), and LTE band 7(2.5 GHz-2.7 GHz). The envelope correlation coefficient(ECC) has below 0.45 in the LTE band 13, 17 and 0.1 in the DCS/PCS/WCDMA band and LTE band 7, respectively.

• Journal of Advanced Navigation Technology
• /
• v.19 no.6
• /
• pp.623-629
• /
• 2015

In the present study, a coplanar waveguide (CPW)-fed printed monopole antenna with an inverted n-shaped slot is newly proposed for dual band operations which cover bandwidths of CDMA (1.85~2.025 GHz) and WLAN (2.4~2.484 GHz) as well as implementation of omnidirectional radiation pattern. For enhancement of impedance bandwidth ($S11{\leq}10dB$) in 2.4 GHz WLAN frequency band, an inverted n-shaped slot instead of the previous n-shaped slot is etched on the printed radiating monopole. The proposed antenna is designed and fabricated on one side of FR4 substrate with dielectric constant of 4.4, thickness of 1.6 mm, and size of $50{\times}25mm^2$. It has been observed that the measured impedance bandwidths are 280 MHz (1.84~2.12 GHz) in frequency band of CDMA and 420 MHz (2.38~2.8 GHz) in WLAN frequency band respectively. It is noticeable that impedance bandwidth in 2.4 GHz frequency band of WLAN is enlarged to three times due to use of inverted L-shaped slot in comparison with impedance bandwidth 140 MHz (2.39~2.53 GHz) obtained by use of the previous n-shaped slot. In addition, good omnidirectional radiation patterns have been observed over the entire frequency band of interest.