• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.505-506
• /
• 2006

This study is focused on the manufacturing technique of powder injection molding of watch case made from zirconia powder. A series of computer simulation processes were applied to the prediction of the flow pattern in the inside of the mould and defects as weld-line. The material properties of melted feedstock, including the PVT graph and thermal viscosity flowage properties were measured to obtain the input data to be used in a computer simulation. Also, a molding experiment was conducted and the results of the experiment showed a good agreement with the simulation results for flow pattern and weld line location. On the other hand, gravity and inertia effects have an influence on the velocity of the melt front because of the high density of ceramic powder particles during powder injection molding in comparison with polymer's injection molding process. In the experiment, the position of the melt front was compared with the upper gate and lower gate positions. The gravity and inertia effect could be confirmed in the experimental results.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.4
• /
• pp.482-492
• /
• 1998

With the purpose of developing a objective fitness evaluation system for knits, the basic bodice pattern for knit was drafted and the suitability of the altered pattern was evaluated. For each of nine different knits, six sleeveless shirts were made with patterns that were altered by different pattern alteration rate: 0%, 30%, 40%, 50%, 60%, or 70% of the stretch rate of the knit. The panel that was composed of 25 clothing specialists evaluated the fitness of the garments. The distance from the dress form landmark to the garment landmark was measured from each experimental garment. And the results of garment fitness evaluation and the measurement of distance from the dress form landmark to garment landmark were compared. The results of this study are as follows: There was high correlation(r$\geq$0.9) between the evaluation of the panel about the garment fit and the landmarks distance. The stretch rate of knits affected the evaluation of the garment fit. The stretch rate in course of knits affected on the garment fit at crosswise direction. The suitable pattern alteration rate was lower than 30% for the knits with high stretch rate in course. It was concluded that in order to get the appropriate knit bodice pattern length, the front bodice pattern must be less shorten than the back bodice pattern. The alteration rate at hip line must be lower than for waist or bust line.

• Journal of the Korean Society of Fashion and Beauty
• /
• v.6 no.2
• /
• pp.97-103
• /
• 2008

This research thesis is designed to put Korean traditional and unique wedding dress with a greater significance and value than any other dress into application right for the global and contemporary trend, as part of a bid to show Korean traditional beauty. To do it, this thesis has attempted to add the traditional beauty to Korean inherent wedding dress and contemporary wedding dress, with the use of various traditional beauty elements, such as the line firm, materials and color based on the research on wedding dress, such as, 'Wonsam' or 'Unlined Jacket, and 'Long-sleeve Red Silk Jacket', and 'Dangeu' or 'Court Suit' that women wore in the Joseon Dynasty. To recreate Korean traditional beauty of line this research thesis has firstly put into the application the sleeve of 'Wonsam' or 'Unlined Jacket' and the form of a large section of 'Wonsam' of 'Unlined Jacket', and 'Doreyon Line' or 'Trimming Line' of 'Dangeu' or 'Court Suit' as wedding dress that women wore in the Joseon Dynasty. Secondly, this thesis has applied lotus and peony patterns out of traditional ones inlaid with 'Long-Sleeve Silk Jacket' into the contemporary wedding dress to develop a creative and special design. Thirdly, regarding the expressive pattern technique, this thesis has designed the repetitive rhythmical pattern with the use of beading technique and embroidery technique, which makes needle work picture and pattern in fabric. Lastly, it can demonstrate the original and distinct Korean style in application of western wedding dress into traditional and contemporary dress, by devising two collections of dress art pieces.

• Journal of Korean Society of Transportation
• /
• v.10 no.1
• /
• pp.41-54
• /
• 1992

The purpose of this thesis is to construct a model to estimate the delay that vehicles arriving randomly will be experienced at an isolated singalized intersection. To do this the following objectives are set in this study: (i) An what distance a random arrival pattern occurs after a platoon of vehicles are dis-charged from the stop line; (ii) A model which estimates the average delay per through-vehicle with respect to the de-gree of saturation; and (iii) The relation between the stepped delay and average approach delay per vehicle. The following are the findings of this study: (i) A random arrival pattern on the first second and third lanes occur 300,400 and 300m downstream from stop line rdspectively. A random arrival pattern on lane group occurs 500m downstream from the stop line ; (ii) A model for the estimation of approach delay has been developed in such a way that up to x=0.7 the delay increases linearly and beyond 0.7 the delay increases rapidly in a form of second order polynomial due to high degree of saturation : and (iii) Approach delay equals approximately 1.21 times of stopped delay.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.349-349
• /
• 2010

Great performance of many semiconductor devices requirs the use of low-resistance ohmic contact. Typically, transmission line method (TLM) patterns are used to measure the specific contact resistance between silicon and metal. In this works, we investigate contact resistance for metal dependent (Cr/Ag, Ni) using TLM pattern based on silicon-on-insulator (SOI) wafer. The electrode with Ni linearly increases contact resistance as the pattern distance increase from $15{\mu}m$ to $75{\mu}m$ in accumulation part, but non-linearly increase in inversion part. In additional, the electrode with Cr/Ag linearly increases contact resistance as the pattern distance increase from $15{\mu}m$ to $75{\mu}m$ in inversion part, but non-linearly increase in accumulation part.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.5 no.1
• /
• pp.44-48
• /
• 1980

This paper proposes a method of the automatic recognition of the handprinted Hanguel patterns. A certain pattern oriented basic letters is normalized to the prototype Hanguel patten by the linking compansation and nomalization algorithm. Tree grammar is used in recognition process. Compared with the previous method. automata processing is simplified and the error is reduced by the new parsing method. This method shows the effectiveness for the constrained pattern. We expect that the new parsing method is very useful for the on-line pattern recognition.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.1
• /
• pp.68-79
• /
• 2009

It is inevitable to have cutting line to get the 2D pattern from 3D body surface. In this paper the efficiency of curvature plot as a cutting line in the process of flattening 3D surface was investigated. As reference, basic clothing construction line was adopted to divide the 3D surface into small blocks to make the flattening process easy. Female dummy as well as human body were scanned and surface of the upper body was segmented using curvature plot and basic constructing line. 2D tight-fit pattern was developed using three software, the RapidForm 2004, 2C-AN and Yuka CAD. Gap between clothes and body, and the clothing pressure on the body was observed to determine the fit of the clothes. As results, clothes constructed with blocks divided by curvature plot displayed a similar level of tight fit as compared with those by basic construction line. It was found that curvature plot is effective method as a segmentation of the 3D surface even for the actual body which does not have any previous reference line. It is expected that application of curvature plot will be expanded in 3D apparel technology.

• Journal of the Korean Home Economics Association
• /
• v.34 no.2
• /
• pp.43-55
• /
• 1996

The purpose of this study was to investigate the slacks pattern making on the movement-fitness of the knee region. The experimental items were divided into the lower limb movement (M1~M5) and slacks pattern designs (4 : basic pattern, in-pleats, side-pleats, seam-line increase). This study was done by clothing pressure test, sensory evaluation test and the difference shape-transformation of wearing-slacks. The summarized finding resulted from experiments and investigation are suggested as follows ; First, the clothing pressure test showed that the order of clothing pressure in the movement was the rabbit leap movement (M3), the sit on knees (M4), the nobleman sitting (M5), the sit on chair (M2) from the highest to the lowest. In the comparison of clothing pressure tested by blocks of lower-limb, center front knee region shows the highest of 300g/cm2. In it by constructional methods, the clothing pressure of in-pleats, side-pleats methods shows lower than basic pattern, hem-line increase methods. Also in comparison of the two methods, in-pleats method shows lower than side-pleats method. Second, by the sensory evaluation test based on the lower-limb movements and constructional methods of slacks, it was found that the functional factor score of the rabbit leap movement was also the waist, hip, knee region was the lowest in all blocks. And in the comparison of constructional methods, in-pleats method was the highest in all methods. Third, in consideration of the difference in the shape-transformation of wearing-slacks on the movement-fitness, pleats pattern design methods showed that the ratio of shape-transformation was lower than basic on seam-line increase methods. But the difference of the side-pleats and in-pleats methods was litle. According to these investigation, the slacks pattern making caused by movement-fitness on the knee region, in-pleats design method was the functional slacks pattern.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.38 no.5
• /
• pp.675-689
• /
• 2014

This study developed an ideal jeggings pattern with an improved body fit for 20-24 year old females. The results of the study are as follows. First, samples for wearing test were made using jegging patterns from three manufacturers; subsequently, one pattern with a relatively outstanding body fit was selected from the first test. The selected pattern suggested a tight knee, belly, and crotch, high front waist line, and low back waist line. The side lines were also lean to the front; consequently, the front hip width was extended for 0.5cm for more space around the belly and the extended front knee part for 0.2cm to increase moving suitability to fix the leaning side lines. A 1cm front waist line was extended for 0.5cm to fix it lower; in addition, the back waist line 3.0cm was extended for 0.5cm to heighten it. The crotch width was also extended for 0.5cm to add more space. The second wearing test for the fixed forms were evaluated for their outstanding features in appearance as well as moving functions that were proposed as final jeggings forms. The results of the study suggested a jeggings pattern with a better body fit using manufacturer patterns that can be used as basic data for pant patterns with better fitting using various stretch fabrics.

• Tribology and Lubricants
• /
• v.22 no.5
• /
• pp.243-251
• /
• 2006

Molecular dynamics simulations of nanoimprint lithography NIL) are performed in order to investigate effects of process parameters, such as stamp shape, imprinting temperature and adhesive energy, on nanoimprint lithography process and pattern transfer. The simulation model consists of an amorphous $SiO_{2}$ stamp with line pattern, an amorphous poly-(methylmethacrylate) (PMMA) film and an Si substrate under periodic boundary condition in horizontal direction to represent a real NIL process imprinting long line patterns. The pattern transfer behavior and its related phenomena are investigated by analyzing polymer deformation characteristics, stress distribution and imprinting force. In addition, their dependency on the process parameters are also discussed by varying stamp pattern shapes, adhesive energy between stamp and polymer film, and imprinting temperature. Simulation results indicate that triangular pattern has advantages of low imprinting force, small elastic recovery after separation, and low pattern failure. Adhesive energy between surface is found to be critical to successful pattern transfer without pattern failure. Finally, high imprinting temperature above glass transition temperature reduces the imprinting force.