• Korean Institute of Interior Design Journal
• /
• v.22 no.1
• /
• pp.211-221
• /
• 2013

As the result of investigating domestic interior design (interior architecture) field-related laws, it was found that interior design (interior architecture) is not recognized as in independent area due to weak classification standards by Korean standard industrial classification and job classification. Korean standard industrial classification is applied as a standard setting limits to applicable targets and industrial fields for laws related to general administration and industrial policy other than various statistic purposes. Also, the standard industrial classifications regarding the industry field determines the laws or applicable tax rates, government support and such according to the classification, and thus is very important. Moreover, interior architecture field is largely different from general architecture due to specialization and distinct characteristics, but due to the comprehensive concept of architecture industry regulations, it is considered the proper assessment for the professionalism is not conducted. Also, interior architecture field has irrational contradictions that is not independent with a clear definition and industry field classification not only in legal system and trade customs. Therefore, The following is proposed as the plan to strengthen the domestic/international competitiveness and system improvements for interior architecture. (1)interior design (interior architecture) must be amended as an industrial classification that can coexist with architecture. (2)interior design (interior architecture) must be amended as a job classification that can coexist with architecture. (3)Among the design tasks of an architect, approval for the design task field of interior architecture field must be legislated. -In architect design standard contract (the existing architecture design task scope and quality standard table) of a structure, among the tasks by request of the owner, (1)interior design tasks shall be legislated. It should be legislated so that interior design (interior architecture) majors can be included as well. (4)The task field of interior design that coexists with design must be amended. (5)National contract law - among contract method by negotiation, specialty item must be vitalized.

• Journal of Korean Society for Quality Management
• /
• v.45 no.4
• /
• pp.611-628
• /
• 2017

Purpose: This paper deals with establishing Korean national standardization policy through a comparative trend analysis of national standardization strategies and each nation's policy environment. It first investigates the standardization strategies including Korea, the United States, Japan and Germany which is currently leading the 4th Industrial Revolution. Methods: This study compares and analyzes national standardization policies that synthesize the determinants of national standard activities using the STEEP, PEST analysis used for policy environment analysis, and National Standardization Model Canvas(N-STD Model Canvas) applying business model canvas. Results: This study confirms the reasoning and operating system of establishing national standard strategy reflecting the social, economic and political situation and the direction of national standard strategy. Conclusion: Based on the results, this study summarized the policy decision factors necessary for establishing the national standard policy and suggested the management plan in the midpoint of view.

• Journal of Korean Institute of Industrial Engineers
• /
• v.17 no.2
• /
• pp.75-86
• /
• 1991

This paper presents a methodology to enable the tolerances on mating parts of an assembly to be specified and be compatible to the precision of an assembly robot so as to achieve maximum system performance. The measure of performance is defined as the Probability of Successful Assembly (PSA). A typical loose fastener assembly, usually called peg-in-a-hole is investigated. The Geometric Tolerancing System is adopted to represent position tolerances of mating parts. Two models are presented by considering modifiers on a position tolerance, Regardless of Feature Size (RFS) and Maximum Material Condition (MMC). Using these models, it is analyzed how the Standard Limits and Fits recommended by ANSI influence the performance of an assembly robot. For this analysis, the Standard Limits and Fits are transformed to the representation scheme of the Geometric Tolerancing System. Due to low PSAs when the Standard Limits and Fits are taken into account, the effect of chamfers around a hole is also analyzed.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.3
• /
• pp.9-14
• /
• 2015

The study is conducted in order to establish validity of industrial safety field's neo-qualification composition by suggesting reengineering procedure of NCS based industrial safety field's qualifying occupational plan. Industrial safety fields are first classified into great classification which are environment energy safety, and then into sub-classification which are industrial safety management, industrial health management, and nondestructive test. NCS based neo-qualification plan is deveopled into progress as following steps; First, planning NCS neo-qualification system. Second, presenting work education combined program certification standard. Third, developing NCS based neo-qualification assessment standard. Fourth, developing work education qualification prototype problem. The process of qualification plan was composed with Worksheet 14 and with 4phase being completing summary of each section, certification and development of assessment standard, and development of prototype problem. As a result, Industrial safety manager was redesigned into Industrial sfety manager and Construction Safety Manager, and Occupational Health Care Manager was redesigned into Occupational Health Care Manager and Industrial Health Manager. This study, in conclusion, suggests development of qualifying occupation that could be applied to the integrated management system and development of future industrial safety field's specialized neo-qualifying occupation.

• Journal of Korean Institute of Industrial Engineers
• /
• v.16 no.1
• /
• pp.1-15
• /
• 1990

An AQL type variables sampling system with switching rules is proposed. Comparative studies of existing variables sampling standards - MIL-STD-414, ANSI Z1.9, ISO 3951, and BS 6002 - are made, and simulation studies on switching procedures are conducted. Based on comparative and simulation studies, a variables sampling standard for Korean industry is proposed. The master sampling tables of the proposed standard are taken from the variables standard ANSI Z 1. 9 and the switching rules are matched to the attributes standard KS A 3109 to enable us to move between the proposed variables standard and KS A 3109. Composite OC and ASN curves of the proposed standard are calculated for selected combinations of lot sizes and AQL's and they are compared with those of ANSI Z1.9.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.939-944
• /
• 2002

Recently Korean Industrial Standards has been revised and established newly accordance with the ISO system, especially ISO 140 series. This study aims to introduce and review ISO 11654 which contents rating of sound absorption, and then this study suggests to establish appropriate evaluating method and Korean Industrial Standard of the sound absorber for use in building.

• Journal of Korean Society for Quality Management
• /
• v.18 no.1
• /
• pp.84-95
• /
• 1990

The objective of this study is to understand the effect of measurement-related investment. That is, this study aims at verifying the correlation between the measurement-related investment and inferiority rate of products by statistical analysis. The samples of this study are 376 industrial companies in Korea, and the research data was analysed on inferiority state of industrial companies with a measurement standard laboratory. The analysis was made by the elementary statistics, the correlation analysis and the regression analysis. The results are summarized as follows : First, the inferioriy rate of the industrial companies with a measurement standard laboratory was relatively lower than that of the other companies without the laboratory by statistical significance. Second, the increment on measurement-related investment had a negative correlation with the increment of inferiority rate, and the increase of measurement-related investment showed decrease of the inferiority rate by regression analysis.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.3
• /
• pp.279-291
• /
• 2013

Objective: The aim of this study was to compare old standard EN 954-1 and new standard EN ISO 13849-1 through case study and provide necessity of adaptation of EN ISO 13849-1 in Korea. Background: International and EU harmonized standard EN ISO 13849 "safety of machinery - Safety-related parts of control system" is classified into Part 1: General principles for design and Part 2: Validation. EN ISO 13849-1 standard was introduced in Official Journal of the European Union on September 8, 2009 as harmonized standard, and old standard EN 954-1 was withdrawn on December 31, 2011. So, EU decided to use of EN ISO 13849-1 standard forcibly from January 1, 2012 for safety of machinery. New machines need to be CE marked if they are to be placed on the market in the European Economic Area(EEA), Switzerland or Turkey, and Korean machine builder should apply EN ISO 3849-1 standard for safety of machinery accordingly. However, current Korean Safety Certification system(KCs mark) for dangerous machinery is not referred to EN ISO 13849-1 standard as safety standard. There is a need of research for adaptation of EN ISO 13849-1 standard in Korea as safety standards for new design of safety-related control system which use mostly electronic components. Method: Five case studies of representative designs for safety-related control system in accordance with EN 954-1were selected according to safety category from B to 4. And these five representative designs were tried to change new design in accordance with EN ISO 13849-1 standard. The results of comparison were analyzed in aspect of economy and technical complexity. Results: The results showed that EN ISO 13849-1 provided quantitative method of application and it enabled designers to create safety-related control systems that require fewer components and less wiring, with many of the components being to a lower specification and, therefore, less costly. Conclusion: EN ISO 13849-1 standard is good for electronic safety-related control systems compare to EN 954-1. By considering the importance of application of EN ISO 13849-1 and benefits, the application of EN ISO 13849-1 as safety standard for safety of machinery is urgent in Korea. Application: The results of comparing EN 954-1 and EN ISO 13849-1 standard might help to determine the adaptation of EN ISO 13849-1 standard for safety of industrial machinery in Korea.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.1106-1108
• /
• 1993

This paper deals with an industrial application of a fuzzy feedback combined learning control to an industrial batch free radical polymerization reactor. As a result, the plant has reduced the batch reaction time by 50 minute and stabilized both by 40 percent reduction of the standard deviations of product qualities, such as the total solid content and the graft gum, and by 45 percent reduction of the standard deviation of the batch reaction end time.

• Industrial Engineering and Management Systems
• /
• v.14 no.1
• /
• pp.11-21
• /
• 2015

The purpose of this research is to develop algorithms using the Differential Evolution Algorithm (DE) to solve a multi-objective, sources and stages location-allocation problem. The development process starts from the design of a standard DE, then modifies the recombination process of the DE in order improve the efficiency of the standard DE. The modified algorithm is called modified DE. The proposed algorithms have been tested with one real case study (large size problem) and 2 randomly selected data sets (small and medium size problems). The computational results show that the modified DE gives better solutions and uses less computational time than the standard DE. The proposed heuristics can find solutions 0 to 3.56% different from the optimal solution in small test instances, while differences are 1.4-3.5% higher than that of the lower bound generated by optimization software in medium and large test instances, while using more than 99% less computational time than the optimization software.