• Journal of Mushroom
• /
• v.17 no.4
• /
• pp.224-229
• /
• 2019

The two most common mushroom species grown in Korea are pearl oyster mushroom (Pleurotus ostreatus) and king oyster mushroom (P. eryngii). In recent years, the production of king oyster mushroom greatly increased due to the automation of the cultivation facilities, and it became a major export mushroom owing to its excellent shelf life. However, the increase in the production of king oyster mushroom led to a decline in its market price; thus, necessitating the development of new mushroom species that could replace king oyster mushroom, to diversify the mushroom market for the benefit of both, the producers and the consumers. The Mushroom division at the National Institute of Horticultural & Herbal Science (NIHHS) reported the development of a new interspecific hybrid between P. ferulae and P. tuoliensis, referred to as 'Creamy.' Two parental strains KMCC00430 (Bisan2ho, P. ferulae) and KMCC00461 (P. tuoliensis) were selected based on the results of genetic resource analysis, and their monokaryons were collected. About 1,000 Mon-Mon crosses were performed and 73 of them were selected. Following repeated cultivation tests and strain analyses, we selected strain 7773, which had a bright creamy pileus and a thick straight stipe, and named it 'Creamy.' Optimum temperature for mycelial growth of Creamy was 25-30℃, and that for fruiting body growth was 16℃. The pileus, which had a brighter creamy color, was small in size with a diameter of 61.2 mm. Although it was cultivated in suboptimal conditions, such as low temperature and high CO₂ concentration, Creamy was characterized by its straight and smooth stipe. Field production tests and further analyses indicated that the yield of Creamy was 5% higher than that of Baekhwang. It is expected that Creamy, the new interspecific hybrid with a bright creamy pileus and a pleasant flavor, will help create new opportunities for mushroom farmers and diversify the mushroom market.

• Journal of Biosystems Engineering
• /
• v.4 no.1
• /
• pp.1-23
• /
• 1979

The use of barley seeder attached to rotary tiller in the rural area has a significant meaning not only for the solution of labor peak season, but also for the increase of land utilization efficiency. The facts that presently being used barley seeders are all based on the mechanical principles of the reverse rotation, center drive and are all using forward rotating tine, which is used to be easily and heavily worn out when it rotates reversely, raise problem of recommending them to rural area in Korea. Therefore, the main objective of the study was to develop new type of rotary tine attachable to barley seeders. To attain the objective the following approaches were applied. (1) The kinematic analysis of reverse rotating barley seeders. (2) The studies on the soil bin and artificial soil. (3) The comparative experiment on the power requirement of prototype tine. The results obtained from the studies are summarized as follow: 1. The kinematic analysis of barley seeder attached to rotary tiller: The following results were obtained from the kinematic analysis for deriving general formulae of the motion and velocity characterizing the rotary tine of barley seeders presently being used by farmers. a) The position vector (P) of edge point (P) in the rotary tine of reverse rotating, center drive was obtained by the following formula. $$P=(vt+Rcos wt)i+Rsin wt j+ \{ Rcos \theta r sin \alpha cos (wt- \beta +\theta r) +Rsin \theta r sin \alpha sin (wt-\beta + \theta r) \} lk $$ b) The velocity of edge point $(P^')$ of reverse rotating, center drive rotary tine was obtained by the following formula. $$(P^')=(V-wR sin wt)i+(w\cdot Rcoswt)j + \{ -w\cdot Rcos \theta r\cdot sin \alpha \cdot sin (wt-\beta +\theta r) + w\cdot Rsin \theta r\cdot sin \alpha \cdot cos (wt- \beta + \theta r \} k $$ c) In order to reduce the power requirement of rotary tine, the angle between holder and edge point was desired to be reduced. d) In order to reduce the power requirement, the edge point of rotary tine should be moved from the angle at the begining of cutting to center line of machine, and the additional cutting width should be also reduced. 2. The studies on the soil bin and artificial soil: In order to measure the power requirement of various cutting tines under the same physical condition of soil, the indoor experiments Viere conducted by filling soil bin with artificially made soil similar to the common paddy soil and the results were as follows: a) When the rolling frequencies$(x)$ of the artificial soil were increased, the densIty$(Y)$ was also increased as follows: $$y=1.073200 +0.070780x - 0.002263x^2 (g/cm^3)$$ b) The absolute hardness $(Y)$ of soil had following relationship with the rolling frequencies$(x)$ and were increased as the rolling frequencies were increased. $$Y=37.74 - \frac {0.64 + 0.17x-0. 0054x^2} {(3.36-0.17x + 0.0054x^2)^3} (kg/cm^3)$$ c) The density of soil had significant effect on the cohesion and angle of internal friction of soil. For instance, the soil with density of 1.6 to 1.75 had equivalent density of sandy loam soil with 29.5% of natural soil moisture content. d) The coefficient of kinetiic friction of iron plate on artificial soil was 0.31 to 0.41 and was comparable with that of the natural soil. e) When the pulling speed of soil bin was the 2nd forward speed of power tiller, the rpm of driving shaft of rotary was similar to that of power tiller, soil bin apparatus is indicating the good indoor tester. 3. The comparative experiment on the power requirement of prototype tine of reverse rotating rotary: According to the preliminary test of rotary tine developed with various degrees of angle between holder and edge pcint due to the kinematic analysis, comparative test between prototype rotary tine with $30 ^\circ $ and $10 ^\circ$ of it and presently being used rotary tine was carried out 2nd the results were as follows: a) The total cutting torque was low when the angle between holder and edge point was reduced. b) $\theta r$ (angle between holder and edge point) of rotary tine seemed to be one: of the factors maximizing the increase of torque. c) As the angle between holder and edge point ($\theta r$) of rotary tine was $30 ^\circ $ rather than $45 ^\circ $, the angle of rotation during cutting soil was reduced and the total cutting torque was accordingly reduced about 10%, and the reduction efficiency of total cutting torque was low when the angle between holder and edge point ($\theta r$) of rotary tine was $10 ^\circ $, which indicates that the proper angle between holder and edge point of rotary tine should be larger than $10 ^\circ $ and smaller than $30 ^\circ $ . From above results, it could be concluded that the use of the prototype rotary tine which reduced the angle between holder and edge point to $30 ^\circ $, insted of $45 ^\circ $, is disirable not only decreasing the power requirements, but also increasing the durabie hour of it. Also forward researches are needed, WIlich determine the optimum tilted angle of rotary brocket, and rearrangement of the rotary tine on the rotary boss.

• Food Science of Animal Resources
• /
• v.22 no.4
• /
• pp.289-293
• /
• 2002

This study was conducted to investigate changes of pH, meat color, cooking loss, shear force and sensory evaluation on Hanwoo meat fed with supplemental fig fermentation(SFF) during storage period. A total of 10 Hanwoo bulls were subjected to one of two treatment diets (control and 10% SFF) from live weight of 400kg far 6 months. After slaughter, longissimus muscles were removed, zipper-wrapped and stored at 4$\^{C}$ for 21 days. The pH, meat color, cooking loss, shear force and sensory evaluation of the samples were measured at 1, 3, 9, 15, 21 days of storage. There were no differences in pH, meat objective color(Hunter L, a and b) and cooking loss (%) of longissimus muscles between control and SFF treatment during storage. Shear force values of longissimus muscle from SFF treatment showed lower level in 1, 3 and 9 days and tended to decrease during storage. No differences in odor and appearance of sensory evaluation were observed between control and SFF treatment during storage. The taste induced by SFF was increased(f<0.05) at 1, 3 and 9 days of storage. These results indicate that the SFF may improve meat quality of Hanwoo during storage.

• Journal of agricultural medicine and community health
• /
• v.42 no.3
• /
• pp.119-131
• /
• 2017

Objectives: The purpose of this study was to compare the diabetic management indicators between agriculture, forestry, and fishery workers (AFF) and other occupational adults (non-AFF) in community-dwelling diabetes. Methods: The study population consisted of 22,127 diabetic population ${\geq}19years$ who participated in the 2015 Community Health Survey. Chi-square test and logistic regression analysis was used to compare the diabetic management indicators between AFF and non-AFF. Socioeconomic characteristics such as age, gender, education level, monthly household income, National Basic Livelihood Security status, and marital status was sequentially adjusted. Results: Among total diabetic population, 3,712 people (16.8%) was AFF and 18,415 people (83.2%) was non-AFF. The fully-adjusted odds ratio [OR] (95% confidence interval [CI]) of current non-medical treatment (0.72, 0.66-0.79), measurement of hemoglobin A1c (0.61, 0.55-0.67), screening for diabetic retinopathy (0.76, 0.70-0.83), screening for diabetic nephropathy (0.75, 0.70-0.81), non-alcoholic or moderate drinking (0.70, 0.64-0.78), nutrition label reading (0.83, 0.71-0.98), low salt preference (0.85, 0.78-0.93), dental examination (0.60, 0.54-0.66), scaling experience (0.84, 0.77-0.93), regular toothbrushing (0.66, 0.58-0.76), and diabetes management education (0.84, 0.77-0.92) was significantly lower in AFF compared to non-AFF. In contrast, the fully-adjusted OR (95% CI) of AFF's low stress level (1.39, 1.26-1.52) and adequate sleep duration (1.22, 1.13-1.32) was significantly higher than non-AFF, which are better indicators of diabetic management in AFF. Conclusions: Overall, the level of diabetes management of AFF was not as good as that of non-AFF. In order to improve the level of diabetes management of AFF, a delicate diabetes intervention strategy considering the occupational characteristics of AFF will be needed.

• Journal of Mushroom
• /
• v.7 no.3
• /
• pp.122-129
• /
• 2009

We determined the genetic relatedness among 81 commercial varieties of oyster mushrooms by either comparison of fruiting body characteristics or using PCR amplification with URP primers. Also, we assessed their temperature adaptation by using box cultivation. Based on our data, some varieties such as Wonhyung and variety 1, Suhan and variety 20, Wang-hukpyung and variety 4, Chunchu #2 and variety 6, Shinong #11 and variety 1, Samgu #1 and variety 2, showed the close genetic relatedness between each other. It is known that mushroom culture room is affected by outer temperature because mushroom need the adequate aeration for their growth. Therefore, in aspect of saving energy, the cultivation of season favorable mushroom species has been recommended. Eight different commercial varieties including Sa-chul, Yeoreum and Bunhong(Pink) grew well at high temperature ($16^{\circ}C$). Also, about 51 different oyster mushroom strains were good at relatively high temperature. However, other 64 different oyster mushroom varieties were grew well at low temperature ($11^{\circ}C$). Fourty-nine varieties were adapted well in most temperatures. The slow growth rate were observed in some varieties including Kun(P. eryngii ), Awi(P. nebrodensis ), and Cheunbok(P. abalonus ), which are not suitable for box cultivation. We believe that the culture characterization of each mushroom varieties should help many farmers in many aspects such as saving energy, quantity improvement and new variety development etc.

• Journal of Mushroom
• /
• v.11 no.3
• /
• pp.131-136
• /
• 2013

The effects of fixed and variable relative humidity on fruiting body formation and characters of Pleurotus eryngii were investigated with normal and thinning treatment plots. In fixed relative humidity, as humidity was lower, period of harvest was longer as well as days for pinheading in the both of normal and thinning plots. In the normal plot, qualities of mushroom were 5.5, 5.8, and 6.3 and yield was 98.6 g per bottle for 90% relative humidity, it was best. In the thinning plot, qualities of mushroom were 7.7, 8.4, and 8.5 and yields were 102.1, 105.8, and 116.9 g at 70, 80, and 90% respectively. In variable relative humidity with a thinning plot, the yield of P. eryngii on condition I(>90% for 1 day ${\rightarrow}$ 85% until thinning(for about 11 days) ${\rightarrow}$ 80%) and III(>90% until pin-heading(about for a week) ${\rightarrow}$ 85% until thinning(about for 5 days) ${\rightarrow}$ 80%) were 85.5 and 87.8 g per bottle, and qualities were 7.8 and 8.0 respectively. For long shelf life and a cultural control of bacterial soft rot disease, the condition I will be more largely adopted by mushroom farmers.

• Journal of agricultural medicine and community health
• /
• v.25 no.1
• /
• pp.11-21
• /
• 2000

This study was conducted to reveal the effects of musculoskeletal risk factor on farmer's syndrome. We sampled 97 farmers aged above 30 in 3 villages of Kyunggi-do. Self-administered questionnaire for general characteristics, farmer's syndrome, musculoskeletal risk factor, blood pressure, and laboratory tests were conducted. According to the score of musculoskeletal risk factor, we divide the subjects high risk group and low risk group. The most common musculoskeletal risk factor is repetitiveness, bending of waist and rapid movement in order. The prevalence of farmer's syndrome of all subjects is 28.9%. In female the prevalence of farmer's syndrome(45.2%) is higher than in male(16.4%) significantly. High musculoskeletal risk group had higher score of farmer's syndrome(5.9) than low musculoskeletal risk group(4.4). The most common symptom is lumbago(76.3%), the second was numb limb and shoulder stiffness(54.6%, 54.6%). The prevalence of numb limb and shoulder stiffness higher in high musculoskeletal risk group than low musculoskeletal risk group, but that of lumbago did not show significant differences. In linear regression, score of farmer's syndrome was related to musculoskeletal risk factor as well as gender. Blood pressure and laboratory test did not show significant differences between two groups. These results suggest that musculoskeletal risk factor would influence farmer's syndrome. Further ergonomic evaluation and intervention of farmer's works and musculoskeletal diseases are needed.

• Korean Journal of Agricultural Science
• /
• v.2 no.1
• /
• pp.125-130
• /
• 1975

This investigation was carried out to define the cultivation state of Ginseng seedling and to study the growth of important characters by location and correlations between characters, the results obtained are summarized as follows; 1. Most of farmers culitvating ginseng seedling had not any special consideration for the improvement of soil, and they applied green manure only as basic fertilizer but they did not apply chemical fertilizer. 2. Any efforts on the improvement of ginseng seed were not found. Seed was harvested from 3 years old ginseng plant. Seedling density was 1.8 cm by 2 cm. 3. Growth of all characters showed significant differences among farms. Coefficients of variation among individual seedling plants was largest at root diameter and smallest at root length. 4. Gromth of all characters without root diameter by planted location under the shadow was poor at front row, however root diameter was shortest at back row. 5. Significant high correlatons were rocognized between root diameter and stem diameter, between leaf blade and stem diameter and between leaf blade and leaf length, but stem length were not correlated with any characters. It is noticable that negative correlations were found between stem length and root diameter, between stem length and root length and between stem length and stem diameter.

• Journal of the Society of Disaster Information
• /
• v.14 no.3
• /
• pp.238-246
• /
• 2018

Purpose: The purpose of this study is to examine the directions for establishing a disaster safety village in rural areas where damage from a similar type of disaster occurs repeatedly by conducting the consciousness survey targeting at experts and disaster safety officials in a local government. Method: The risks of disaster in rural areas were examined and the concept and characteristics of disaster safety village which is a measure on the basis of Myeon (township) among the measures of village unit were examined in order to carry out this study. In addition, opinion polling targeting at officials-in-charge in the local government and survey targeting at experts in disaster safety and building village were conducted. Based on the findings, the directions for establishing a disaster safety village that fitted the characteristics of rural areas were examined. Result: The officials-in-charge in the local government answered that rural areas have a high risk of storm and flood such as heavy snowing, typhoon, drought, and heavy rain as well as forest fire, and it is difficult to draw voluntary participation of farmers for disaster management activities due to their main duties. They also replied that active support and participation of residents in rural areas are necessary for future improvement measures. The experts mostly replied that the problem of disaster safety village project is a temporary project which has low sustainability, and the lack of connections between the central government, local governments and residents was stressed out as the difficulties. They said that measures to secure the budget and the directions of project promotion system should be promoted by the central government, local governments and residents together. Conclusion: The results of this study are as follows. First, a disaster safety village should be established in consideration of the disaster types and characteristics. Second, measures to secure the budget for utilizing the central government fund as well as local government fund and village development fund should be prepared when establishing and operating a disaster safety village in rural areas. Third, measures to utilize a disaster safety village in rural areas for a long period of time such as the re-authorization system should be prepared in order to continuously operate and manage such villages after its establishment. Fourth, detailed measures that allow residents of rural areas to positively participate in the activities for establishing a disaster safety village in rural areas should be prepared.

• Journal of Animal Environmental Science
• /
• v.18 no.sup
• /
• pp.21-28
• /
• 2012

Since the temperature during summer is higher than the temperature which is suitable for milking cows, high temperature stress have severely affected dairy farmers due to decreased milk production. This study was carried out to investigate the effect of rainwater sprinkling system for reducing heat stress in milking cows during intense heat time. Treatment conditions were divided into 2 types ; No rainwater sprinkling (T1) and Rainwater sprinkling (T2). Temperature in the milking cow shed, feed intake, milk yield, respiration rate and rectal temperature were measured to investigate the effect of hot environment on the physiological, productive responses in milkig cows. The results obtained are summarized as follows : The daily milk yields were 24.5 and 27.4 kg per head in T1 and T2 during experimental period. The respiration rate was significantly higher in T1 than those of T2. The rectal temperature in T1 ($40.6^{\circ}C$) was higher than those of T2 ($39.8^{\circ}C$). It was suggested that rainwater sprinkling system installed in the dairy cow shed was effective means to reduce heat stress of milking cow.