• The Korean Journal of Archival Studies
• /
• no.28
• /
• pp.123-153
• /
• 2011

In Asia, when cotton and cotton fabrics cultivated and produced in India of Southern Asia had spread to the whole Asia area by land and by sea, the Cotton Road and cotton fabric cultural area could be formed. In Korea, the traditional cotton (Gossypium arboreum) brought by Moon Ik-Jeom in 1363 was cultivated and then the Upland cotton (Gossypium hirsutum) brought via Japan could be produced from 1904. Especially, Gwangju/Jeonnam was the most active place in producing traditional cotton, and eventually became the center of cotton cultivation and fabric production after bringing in Upland cotton. In order to collect and record the cotton cultural resources in the broad area, the Cultural Resources Set, classified its component parts should be made first and then the collecting objects should be investigated. The collecting areas are selected based on the spreading paths and the regional significance of cotton. Since its difficulty of collecting the relevant resources from all of the places in Asia, it should be planned to share the resources through exchanges and cooperation among private, institution and organization. The relevant experts from the various fields should participate in the interdisciplinary researches which are necessary for collecting and recording of wide area cultural resources. Considering the collecting limitation of genuine relics, the digital archives should be established and then offered through a web site that everyone can use them freely by remote. It also needs to plan to display on and off-line for users to perceive the similarity, difference and interconnections of the resources with ease.

• Journal of Environmental Science International
• /
• v.28 no.6
• /
• pp.545-552
• /
• 2019

Tropaeolum majus, with a high decorative and food demand for vertical greening systems, has been utilized to revitalize urban agriculture. The effects of number of non-woven fabrics in a non-water environment and the adaptability of T. majus to this system were investigated. Planting ground composition of the container-type wall vertical greening system was made using non-woven fabric in one, two, three, or four layers. The results showed that the soil water content remained the highest when the non-woven fabric comprised 4 sheets. The morphological properties showed more growth with the 4 sheets than with 1, 2, and 3 sheets. In terms of physiological characteristics, chlorophyll content was mostly high in the 4 sheets, while shoot fresh weight value was in the order of 3 > 4 > 2 > 1 sheet, and root fresh weight value was in the order of 4 > 2 > 1 > 3 sheets. The dry weight of the measured values in the shoot was in the order of 4 > 3 > 2 > 1 sheet while no clear difference was found in the root of each treatment. The difference in the flowring characteristics was not different, but in evaluating the characteristics as a whole, the growth in the three layers of non-waven fabric was the best. In addition, the soil moisture contents and the growth characteristics were statistically significant as a positive correlation between the groups. Thus, greater the non-woven fabric, the higher is the adaptability of T. majus to dry stress under soil water-free conditions by maintaining soil moisture content. This showed that it represented an effective alternative as a method of vertical greening system for lower maintenance urban agriculture.

• Science of Emotion and Sensibility
• /
• v.24 no.2
• /
• pp.65-74
• /
• 2021

With recent innovations in the ICT industry, the demand for wearable sensing devices to recognize and respond to biological signals has increased. In this study, a three-dimensional (3D) spacer fabric was embedded in a single-wall carbon nanotube (SWCNT) dispersive solution through a simple penetration process to develop a monolayer piezoresistive pressure sensor. To induce electrical conductivity in the 3D spacer fabric, samples were immersed in the SWCNT dispersive solution and dried. To determine the electrical properties of the impregnated specimen, a universal testing machine and multimeter were used to measure the resistance of the pressure change. Moreover, to examine the changes in the electrical properties of the sensor, its performance was evaluated by varying the concentration, number of penetrations, and thickness of the specimen. Samples that penetrated twice in the SWCNT distributed solution of 0.1 wt% showed the best performance as sensors. The 7-mm thick sensors showed the highest GF, and the 13-mm thick sensors showed the widest operating range. This study confirms the effectiveness of the simple process of fabricating smart textile sensors comprising 3D spacer fabrics and the excellent performance of the sensors.

• Conservation Science in Museum
• /
• v.27
• /
• pp.39-56
• /
• 2022

The purpose of this project was to improve the stability of a pair of leather socks for use on snowy days in the collection of the National Museum of Korea (Namsan1567) by conducting conservation treatment and restoring the socks to their original form for use in research and exhibition. Leather socks are referred to in ancient documents with names combining the word "mal" for socks with a term indicating their material (e.g., pimal, meaning leather socks; nokpimal, meaning deer leather socks; jangpimal, meaning roe deer leather socks, or lipimal, meaning racoon dog leather socks) and are mentioned mostly in connection with Jeju Island. Related documents include the Seungjeongwon ilgi (Daily Record of the Grand Secretariat), Injaeilnok (Diary of Injae Jo Geukseon), and Hamel's Journal and a Description of the Kingdom of Joseon. Extant examples of ancient leather socks display the same form as beoseon (traditional Korean socks) and are made of either leather or a combination of leather and fabric. It is likely that such leather socks were worn on Jeju Island to protect the feet from the cold. A condition survey of the leather socks was first conducted to establish a plan for their conservation treatment. Since the socks were in rather poor condition, it was decided to identify their original form through an investigation of relics and pertinent previous studies. The socks were cleaned in consideration of results of the condition survey, and the missing parts around the necks of the socks were reinforced in a reversible manner using counting stitches with cloth dyed to match the original color. Since the bottoms of the socks had lost much of their original form due to deterioration and disintegration in the leather, supports were made and inserted inside the socks to help retain their shape. Through these processes, the structure and characteristics of the socks and the techniques used in their production could be analyzed, their condition was stabilized, and their original form was recovered.

• Science of Emotion and Sensibility
• /
• v.24 no.2
• /
• pp.25-38
• /
• 2021

The aim of this study is to protect workers and pedestrians from accidents at night or bad weather by attaching optical fiber to existing safety clothing that is made only with fluorescent fabrics and retroreflective materials. A safety vest was designed and manufactured by applying optical fiber, and energy-harvesting technology was developed. The safety vest was designed to emit light using the automatic flashing of optical fibers attached to the film, and an energy harvester was manufactured and attached to drive the light emission of the optical fiber more continuously. As a result, first, the vest wearer' body was recognized from a distance through the optical fiber and retroreflection, which helped prevent accidents. Thus, this concept helps in saving lives by preventing accidents during night-time work on the roadside or activities of rescue crew and sports activities, or by quickly finding the point of an accident with a signal that changes the optical fiber light emission. Second, to use the wasted energy, a piezoelectric-element power generation system was developed and the piezoelectric-harvesting device was mounted. Potentially, energy was efficiently produced by activating the effective charging amount of the battery part and charging it auxiliary. In the existing safety vest, detecting the person wearing the vest is almost impossible in the absence of ambient light. However, in this study, the wearer could be found within 100 m by the light emission from the safety vest even with no ambient light. Therefore, in this study, we will help in preventing and reducing accidents by developing smart safety clothing using optical fiber and energy harvester attached to save lives.

• Science of Emotion and Sensibility
• /
• v.24 no.4
• /
• pp.117-128
• /
• 2021

In this work, we study smart gloves that can prevent carpal tunnel syndrome when using a mouse. Because the left and right wrist movements are fine, a tensile fabric sensor with a large gauge factor and low hysteresis was required before the study. A universal testing machine was used to calculate each gauge rate on four different fabrics, and the fabric with the least hysteresis was selected. In addition, three attachment methods were analyzed using Arduino to select a method with a large sensor value change. For prototypes made by attaching to the selected fabric, data patterns were analyzed using Arduino. The first method identifies only one sensor (A sensor), and the second identifies two sensors (A and B sensors). When the wrist is bent to the right, tensile fabric sensors are attached to both the left (A sensor) and right (B sensor) sides of the wrist, the A sensor is strained, increasing the △sensor value, and the B sensor is relaxed, decreasing the △sensor value. However, when the wrist was bent to the left, the pattern was analyzed in the opposite direction. Through this study, we examined smart gloves to prevent carpal tunnel syndrome with an algorithm that turns on the LED when the wrist is bent, and based on the results of this study, we will directly use mice on 10 people to identify problems and solve problems when used.

• Science of Emotion and Sensibility
• /
• v.25 no.1
• /
• pp.115-128
• /
• 2022

This study investigates the effect of wrist guards equipped with electronic muscle stimulation on reducing wrist pain and improving wrist function of actual lure fishing participants. This study combined conductive fabrics by selecting two products of wrist guards that can be used in lure fishing, which requires holding fishing rods with hands for a long time. It was conducted on ten healthy men aged 35 to 45, and the selection conditions were selected for those who did not have a history of surgery on the wrist and are currently enjoying lure fishing as a hobby. The experimental movement was performed 100 times before each experiment to cause delayed muscle pain to cause wrist fatigue when lure fishing was performed with the operation of grip strength and range of motion. As a result of this study, it was found that pain reduction, range of motion, and grip strength were improved when electrical stimulation was applied after wearing a wrist band in the form of a wrist wrap and semi-gloves. The conclusion of this study was that when electrical stimulation was applied to the wrist guards, the effect of improving the fatigue and function of the wrist could be confirmed through experiments. Through this study, it is expected that wearing electronic muscle stimulation wrist guards will have a significant effect on preventing wrist injuries and improving functional recovery for lure fishing participants.

• Journal of Korean Home Economics Education Association
• /
• v.35 no.2
• /
• pp.133-144
• /
• 2023

The goal of this study was to improve environmental awareness by systematically developing a hands-on online lesson for adults on making drink bags by upcycling discarded umbrella cloth. The lesson was developed using an ADDIE model. During the analysis stage, the instructional design direction was established based on the findings of previous studies. In the design stage, the operation of practical classes in the online environment was specifically planned. The contents of education and the training time were also determined. The materials developed during the development stage included a kit and theoretical information containing images to raise awareness of environmental pollution and the significance of upcycling, as well as videos and photos. During the implementation stage, two sessions were held three months apart. A total of 36 adults participated, with 18 participants in each session. In the evaluation stage, the first session participants provided feedback on class satisfaction, which led to improvements. Positive feedbacks were received from the second session participants, who expressed satisfaction with the smooth communication and easy approaches to the learning materials. In both instances, the surveys on environmental consciousness and attitudes yielded an overall average score of 4.27, indicating a generally positive evaluation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6A
• /
• pp.861-872
• /
• 2008

Concrete-filled glass fiber reinforced polymer tubes are often used for marine structures with the benefit of good durability and high resistance against corrosion under severe chemical environment. Current research presents results of a comprehensive experimental investigation on the behavior of axially loaded circular concrete-filled glass fiber reinforced polymer tubes. This paper is intended to examine several aspects related to the usage of glass fiber fabrics and filament wound layers used for outer shell of piles subjected to axial compression. The objectives of the study are as follows: (1) to evaluate the effectiveness of filament winding angle of glass fiber layers (2) to evaluate the effect of number of GFRP layers on the ultimate load and ductility of confined concrete (3) to evaluate the effect of loading condition of specimens on the effectiveness of confinement and failure characteristics as well, and (4) to propose a analytical model which describes the stress-strain behavior of the confined concrete. Three different types of glass fiber layers were chosen; fabric layer, ${\pm}45^{\circ}$ filament winding layer, and ${\pm}85^{\circ}$ filament winding layer. They were put together or used independently in the fabrication of tubes. Specimens that have various L:D ratios and different diameters have also been tested. Totally 27 GFRP tube specimens to investigate the tension capacity, and 66 concrete-filled GFRP tube specimens for compression test were prepared and tested. The behavior of the specimens in the axial and transverse directions, failure types were investigated. Analytical model and parameters were suggested to describe the stress-strain behavior of concrete under confinement.

• Economic and Environmental Geology
• /
• v.57 no.2
• /
• pp.253-261
• /
• 2024

Olivine, a major mineral in the upper mantle with strong intrinsic elastic anisotropy, plays a crucial role in seismic anisotropy in the mantle, primarily through its lattice preferred orientation (LPO). Despite this, the influence of the microstructure of mylonitic rocks on seismic anisotropy remains inadequately understood. Notably, there is a current research gap concerning seismic anisotropy directly inferred from mylonitic peridotite massifs in Korea. In this study, we introduce the deformation microstructure and LPO of olivine in the mantle shear zone. We calculate the characteristics of seismic anisotropy based on the degree of deformation (proto-mylonite, mylonite, ultra-mylonite) and establish correlations between these characteristics. Our findings reveal that the seismic anisotropy resulting from the olivine LPO in the ultra-mylonitic rock appears to be the weakest, whereas the seismic anisotropy resulting from the olivine LPO in the proto-mylonitic rock appears to be the strongest. The results demonstrate a gradual decrease in seismic anisotropy as the fabric strength (J-index) of olivine LPO diminishes, irrespective of the specific pattern of olivine's LPO. Moreover, all samples exhibit a polarization direction of the fast S-wave aligned subparallel to the lineation. This suggests that seismic anisotropy originating from olivine in mylonitic peridotites is primarily influenced by fabric strength rather than LPO type. Considering these distinctive characteristics of seismic anisotropy is expected to facilitate comparisons and interpretations of the internal mantle structure and seismic data in the Yugu area, Gyeonggi Massif.