• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.783-788
• /
• 2004

Recently, Statistical Energy Analysis(SEA) is being increasingly applied to describe vibro-acoustic behavior of complex structures, such as air plane, automobile, ship, building. In this paper, we discuss the application of SEA to predict the interior noise for KTX train. To validate the SEA model of KTX train, calculated the interior noise for motorized car is compared to measured one. Finally, the reduction measures of interior noise for KTX are also discussed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.968-973
• /
• 2006

Although Gyeonggi-do is the core area which has a quarter of the population of Korea, it has poor railway network and then it have got serious traffic problem. So in this paper, it is introduced the improving methods of railways on Gyeonggi-do. In first, it was showed a fast and effective railway route implementation according to the characteristics with the similar population but the 17 times bigger area than that of Seoul. And it was explained multipurpose using method of the railways of Gyeonggi-do whit subway, commuter, express and high speed train etc. Finally unlike Seoul subway focusing on approachability, it was proposed 'express train paradigm' focusing on implementing the high movability which railways of Gyeonggi-do must have. So with 'Bundang-line' metropolitan railway, the case study in applying to southern metropolitan area with those suggestion was showed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.250-252
• /
• 2006

In this paper, we studied for the measurement system for on-line testing and evaluation of tilting train express(TTX). The measurement system is installed in each train for the performance measurement during the test run. It is composed of software part, hardware part and can measure various signals such as velocity, voltage, temperature. The software controls the hardware of the measurement system, performs the analysis and calculation of measurement data and acts as interface between users and the system hardware. The hardware is consisted of 7 DAMs(Data Acquisition Modules) and 6 monitoring modules.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1735-1740
• /
• 2007

Communication network in KTX (Korea Train eXpress), the express train system, has to transmit status variables periodically within tens of seconds and real-time control informations which has short reply like status transition or alarm. KTX uses $Tornad^*$ (TOken Ring Network Alsthom Device) network for this purpose. This network can send and receive messages which enable express train applications embedded in intelligence boards to communicate by itself. Layer 1, 2 of $Tornad^*$ is implemented with differential manchester encoding and IEEE 802.4 standard(token bus standard) respectively. To implement layer 1 and 2, we implemented twisted pair modem using FPGA for layer 1 and used MC68824 from Motorola for layer 2. MC68824 bus arbitration and memory controller is implemented using CPLD.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.646-651
• /
• 2004

Crashworthy design of a train is a systematic approach to ensure the safety of passengers and crews in railway transportation for the prescribed accident scenarios. This approach needs new structural arrangements and designs to absorb higher levels of impact energy in a controlled manner and interior designs to minimize passenger injuries. In this paper, crashworthy design approach is applied to the tilting train express (TIX) design which is newly being developed. Based on a head-on collision and a level crossing collision scenarios, the crash behaviors of a TTX design candidate arc evaluated numerically using the finite element method. Finally, design alternatives which show better crashworthy performances are proposed and verified through the full-rake collision simulations.

• 한국철도학회논문집
• /
• 제10권5호
• /
• pp.540-545
• /
• 2007

틸팅 열차는 곡선 구간에서 차체가 안쪽으로 기울어져 고속으로 회전해도 탈선하지 않는 열차를 말한다. 여러해 동안 한국철도기술연구원에서는 이 열차를 개발해왔다. 이 논문에서는 그동안 개발되어온 틸팅 열차의 동역학해석을 수행하였다. 이를 통해서 국제기준에 맞는 안정성과 주행성능을 지니고 있는지 확인하고 향후 속도 개선의 기본 자료를 생성하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.361-366
• /
• 2001

The present study describes a practical estimation procedure about the pantograph under several severe aerodynamic load conditions. As the operating speed of the Korean Train Express(KTX) reaches 350km/h, structural safety at various conditions should be examined at the design stage. In the present study, a compact and reliable procedure is developed to get aerodynamic loads on each part of the pantograph regarding the typhoon condition, the train/tunnel interaction, the train/train interaction and the side wind condition. In the estimation procedure, 3-dimensional steady and unsteady CFD simulation around the high speed train facilitates assigning the external local flow condition around the pantograph. The procedure is verified using the results of the low speed wind tunnel test at JARI and applied to 7 flow conditions and 4 operation configurations.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.586-590
• /
• 2005

In order to compare the dynamic loading effects of particular trains it is necessary to use methodology that separates the two inherent aspects of the dynamic response of the total dynamic system-the characteristics of the train and a bridge. Because the train signature profile is a function of axle spacing and axle loads, it can be calculated which is independent of the characteristics of an individual bridge. Thus the use of the train signature enables a rapid comparison of the effects of different trains to be made. If the magnitude of train signature for a new train type is less than of existing trains on a route then the route will be satisfactory for the new train. This study presents a quantitative analysis of the dynamic loading effects for various domestic real trains-PMC8, PMC16, Mugunhwa passenger coach, several freight coach, KTX and TTX(Tilting Train Express)- Using the train signature.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.810-813
• /
• 2003

The present headway on KNR(Korea National Railway) lines varies from 6 to 10 minutes depending on the each line and by the operation of High Speed line in 2004, the bottleneck would be expected within a few sections such as Daejeon-Daejeon shunting yard which will be the common mute between KTX(Korea Train Express) and conventional trains. Therefore, KNR would like to reduce the headway of the all lines by 4 minutes with the implementation of ERTMS/ETCS on-board system. Where ETCS(European Train Control system), the subsystem of ERTMS, is Automatic Train Protection system for safety train running. This study will be analyze expected braking distance and running time depending on characteristics of conventional passenger and freight trains and high speed train will be operated within electrified conventional line for comparing the headways of ATS(Automatic Train Stop) system and ETRMS/ETCS system within the Daejeon-Daejeon shunting yard section.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집 특별세미나,특별/일반세션
• /
• pp.359-366
• /
• 2009

This paper aims for analyzing the vibration serviceability of train by simply expressing its vertical vibration when it passes a railway bridge. For this purpose, bridge-train transfer function was derived and bridge-train interaction analysis was performed by using the derived function. The bridge-train transfer function was developed with the assumption that train is a single mass-spring system, and bridge-train interaction analysis was performed on simple beams of KTX passenger car. The vertical acceleration signals of passenger cars obtained from bridge-train interaction analysis were compared with them of cars obtained from the bridge-train transfer function. As a result, it could be estimated to express the vertical vibration inside the passenger car required for vibration serviceability evaluation by using the vertical vibration of bridges obtained from moving load analysis. Therefore, it may be possible to evaluate the vibration serviceability of railway bridges considering bridge-train interaction effect.