• Tribology and Lubricants
• /
• v.33 no.1
• /
• pp.31-35
• /
• 2017

Recently, international attention has been focused on the development of non-traditional energy resources such as shale gas and oil sands, due to the steep increase in the demand for natural resources. The materials incorporated in an oil gas plant module experience extreme environments, and are prone to various problem such as fracture, corrosion and abrasion due to low-temperature brittleness. In order to improve the plant life, it is necessary to perform characteristics study and performance evaluation of the materials. In particular, this paper explains the main set of materials which are most frequently used in oil sands plant project. In order to investigate wear characteristics, the authors carried out abrasive wear tests of TP 316, stainless steel and SS 400, structural rolled steel. For the analysis of the abrasive wear resistance of an oil sands plant, the authors carried out the test according to ASTM G 105 "Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Test" standard guidelines. The authors have derived the results from the data associated with the loss of mass with respect to wear rate. During the test, for a given wear length for 10,000 revolutions, the rotational speed and applied force of the rubber wheel were varied.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.7
• /
• pp.207-212
• /
• 2008

In EMC(electromagnetic compatibility) certification, the facilities and equipments have been considered as important qualification for registration of EMC certification business. In future, the certification environment is also supposed to be restricted Strictly. Many organizations have made on attempt to establish, certification environment as a international standard. Therefore, in order to enhance the competitive powers of domestic certification industry, a real-time system which can be measure automatically and remotely the temperature, humidity, illumination, CO/CO2, magnetic field, and human sensing is proposed in this paper. This system can also maintain the appropriate measurement environment by using USN (ubiquitous sensor network). The availabilities are confirmed through the experiment.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.1
• /
• pp.28-39
• /
• 2016

Since 2002, Korea Government has introduced Green Standard for Energy and Environmental Design Certification for reducing GHG emission in building area. However, total number of G-SEED Certification is only around 1% of total number of approved apartment buildings despite the various boosting policies. In this situation, most boosting policies and policy improvement researches are leaning toward the supplier's aspect. However, comprehensive relation and dynamics between consumer and supplier has to be considered because housing market is operated by market participants' mutual interaction. Therefore, this research presents system dynamics models based on decision making analysis of consumer and supplier in G-SEED Certification apartment building market. Then, this research evaluate the validity of boosting policies using the model. The proposed analysis can assist government to make next G-SEED Certification boosting policy.

• Journal of Korean Society for Quality Management
• /
• v.41 no.4
• /
• pp.637-648
• /
• 2013

Purpose: The objective of this study is to provide a methodology that can facilitate efficient development of a product portfolio by utilizing Korean Standards(KS) networks. Methods: A case study on a steel manufacturing company is provided. Social network analysis h as been conducted on KS network and KS certification information of the company. Core test standards of a company have been identified. The core standards, then, used to construct a product-standard network of a corresponding industry. Results: As a result of analyzing product-standard networks, a product portfolio of a company has been developed. It has been shown that the candidate product portfolio is a cost-effective alternative in terms of standard maintenance cost. Conclusion: By using social network analysis, standards information can be used to support new product development process.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.7
• /
• pp.566-573
• /
• 2017

A type certificate is required to ensure the safety of aircraft design. If a person is to pursue major design change to the certified aircraft, an applicant has to apply for a new type certificate, an amended type certificate, or a supplemental type certificate appropriately. Design changes to be applied for a supplemental type certificate are abstractly defined in ICAO, FAA, and EASA regulations. In this paper, authors reviewed certification procedures regarding design changes, analysed certification examples of leading countries, and presented the criteria to determine "major design changes not extensive" for a supplemental type certificate.

• Journal of the Korean Institute of Rural Architecture
• /
• v.26 no.2
• /
• pp.17-25
• /
• 2024

This study is to use B.F. certification standards to identify the application and differences of B.F. facilities according to various approaches, and to use the analysis results as basic data for the expansion and renovation of new facilities, the National University (Jeonnam University Library), which underwent remodeling before the implementation of the certification system, and the two newly established private universities (Joseon University Library) that were subject to legal application before the implementation of the certification system. First, Chosun University met more B.F. certification standards than Chonnam National University, and mainly intermediary facilities belonged to the best to the best. Second, Chosun University and Chonnam National University's internal facilities met many B.F. certification standards, and Chonnam National University had many areas to improve and found areas to remodel. Third, information facilities at Chonnam National University and Chosun University only had facilities for the hearing impaired, and there were no information facilities for the visually impaired. Facilities for the visually impaired had to be installed, and compared to Chosun University, Chonnam National University fell short of the B.F. certification standard, so there were many areas that needed to be remodeled.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.7
• /
• pp.593-599
• /
• 2021

The demand for e-VTOL aircraft is expected to be increased rapidly in the future as a means of urban transportation due to operating cost reduction, eco-friendliness and convenience of vertical take-off and landing using pilot-aids automation system. However, there are many technical hurdles to be solved in securing safety and certification which are essential for commercialization and urban operation. So far, there is no e-VTOL aircraft that has received type certificate and standard airworthiness certificate due to the technical problems and safety requirement differences with conventional aircraft. The e-VTOL aircraft certification should also meet the equivalent level of safety required by the current airworthiness standards, but there are existing problems in securing safety and meeting current standards. In this study, the e-VTOL's certification problems and technical limitations in satisfying the current standards are presented.

• Journal of Agricultural Extension & Community Development
• /
• v.12 no.2
• /
• pp.187-195
• /
• 2005

The objectives of this study were to analyze present status and to suggest for the future upbringing programs for informal environment educator of Environmental NGOs in Korea. Based on the findings from reviewing environmental educators’ certification systems in Environmental NGOs, the following suggestions should be considered for improving the certification systems. 1) Government and environmental NGOs should adopt a certification system by implementing qualifying examination for employing specification of informal environmental educator. 2) Applicants to obtain a certification of informal environmental educator in environmental NGOs should be qualified through standard processes including taking required curriculum and programs. They must be evaluated informal environmental educator’ ability accurately through their portfolio, teaching ability, professional responsibilities and so on. 3) Standardized curriculum and programs should be adopted by government for the initial preparation of environmental educators reflecting the guidelines from the KOSEE (The Korean Society for Environmental Education) and NAAEE (North American Association for Environmental Education) in the future.

• Journal of Energy Engineering
• /
• v.26 no.4
• /
• pp.92-99
• /
• 2017

In Korea, the zero energy building was designated as the 7 new industries in the Ministry of Land and the 8 new industries in the Ministry of Industry. In order to maximize the insulation performance of the building envelope, improve the efficiency of building equipment, We are aiming. It is necessary to analyze the energy requirements of the buildings (cooling, heating, hot water supply, lighting, ventilation) of buildings with energy efficiency level of 1++ which is equivalent to the zero energy building certification system in Korea, It is aimed to be used as basic data for the advancement of energy building certification system. Zero Energy Building certification is estimated to be 61 buildings by 2017, and the approximate reference value and the first energy requirement for each of the five loads are calculated considering passive and active aspects. It is difficult to say that it is a clear standard because there is a small sample of data for calculating the load standard. However, it is necessary to interpret various methods in order to upgrade the Zero Energy Building certification standard in the future.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.1
• /
• pp.3-14
• /
• 2015

As buildings in the downtown area, such as the complex building connected to the skyscraper and the underground facility, have become large and complex, the range of target domain of the space information service is rapidly expanding to the interior space; it is considered that this change will create various demands of service such as the indoor geospatial information base safety, the management of facility, and the interior navigation in the future, along with spread of mobile devices and development of IT technology. As for the indoor geospatial information, however, there is no certification standard of the established indoor geospatial information data quality, so preparing the certification standard is urgent. Thus, this study reviewed foreign and domestic research cases and prepared measures for quality verification of the indoor geospatial information to conduct a verification test of the Yeongdeungpo Station indoor geospatial information, established in 2014. As a result, through the verification test of the method and standard of the indoor geospatial information quality certification suggested by this research, it was identified that the uniform and higher quality data could be classified, and the types of error high frequently occurring could be investigated. These results are expected to be utilized as the basic data for establishing quality certification system for the indoor geospatial information in the future.