• Journal of Korean Society for Quality Management
• /
• v.29 no.4
• /
• pp.1-17
• /
• 2001

The characteristics of Telecommunication Industry encompass not only hardware and software but also the service aspect of them. One way to improve the industry up to the international level in terms of hardware and software as well as service aspect is to comply with tile TL 9000 standard, which was established by QUEST Forum, the group consisted of U.S. communication industry, based on the ISO 9000 Quality Management System. In this study, design, establishment, implementation, maintenance and improvement of quality system for domestic telecommunication industry are thoroughly investigated based on TL 9000 standard, with its LCM(Life Cycle Model) model and measurements. Also, Process Approach is suggested to help the industry realize the system to meet its specific needs. In addition, specific examples with the successful certification to TL 9000 standard are presented.

• Journal of Environmental Health Sciences
• /
• v.30 no.5 s.81
• /
• pp.432-439
• /
• 2004

Korean certification regulation for particulate filtering respirators requires inward leakage (IL) test as European Standards (EN) and the standard levels of regulation are the same as those of EN. This study was conducted to evaluate particulate filtering respirators being commercially used in the market by using IL and assess the characteristics of IL. The study began with discussing the concept of IL, comparison of IL with fit test, and IL measurement method. Three brands of half masks and 10 brands of filtering facepieces (two top class, four 1st class and four 2nd class), total 13 brands respirators, and 10 test panels (subjects) who were classified in 9 facial grids in accordance with face length and lip length, were selected for IL test. IL tests were conducted in the laboratory of 3M Innovation Center which was established by EN standard. As expected ILs of half masks were lower than those of filtering facepiece mask. ILs of half masks and some filtering facepieces were significantly different in manufacturers. ILs of 1st class filtering facepieces were found to be much more than those of 2nd class and thus the result would cause wearers to get confused to select a mask. Four of six brands being no compliance with standards were thought that they should be tested again for certification because of a lot of differences from standards. There were no significant differences among ILs of five exercises. In 6 out of 13 brands lognormal distribution of ILs may be a better fit distribution and in 7 brands both lognormal and normal distributions were rejected. The result indicates that geometric mean may be better than arithmetic mean to establish standard.

• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.4
• /
• pp.846-858
• /
• 2014

The purpose of this study is to help domestic aquaculture farm by improved evaluation method. First, We analyzed evaluation method of domestic aquaculture certification, the greater retailer's supplier and global standard. Next, By using Analytic Hierarchy Process (AHP), We found priority and importance between criteria of SQF(Safety Quality Food) standard which is appled to alternative model for aquaculture evaluation. As a result is presented as follows: regarding pairwise comparison between System Element module and Good Aquaculture Practice(GAP) module, GAP is recognized to be more important than System Element. The highest priority criteria is presented 'Purchase and Use of Medications, Aquaculture Feeds and Aquaculture Chemicals.' Next, 'Management commitment', 'Attaining Food Safety', 'Location and Layout of Structures and Vessels', 'Stock Identification and Traceability are recognized high position. This study has major implications for research into development of evaluation method.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.50 no.5
• /
• pp.13-29
• /
• 2022

According to the revision of the Convenience Act for Persons with Disabilities, parks and park facilities where the first park development plan is established after December 4, 2021 are mandatory, and parks must be equipped with convenience facilities for the disabled. Hence, this study aims to derive the improvements of the park evaluation index by analyzing the park certification evaluation index, the building certification evaluation index of park facilities, and the evaluation reports of the current certification status cases. As a research method, first, the certification of parks and park facilities were compared and reviewed with the Park Green Act, and differences in the certification process and certification performance were compared and analyzed. Second, differences and common items were derived by analyzing barrier free (BF)-certification evaluation indicators for parks and buildings. Third, improvement plans were derived after analyzing differences and problems in 4 BF-certified parks and four building certification cases of park facilities in certified parks, focusing on the self-evaluation report and examination results. As a result of analyzing the park and building evaluation indicators, the items for which the evaluation purpose, evaluation method, and evaluation items were commonly applied to 7 access roads for each facility, 5 parking areas for the disabled, 2 guide facilities for information facilities, 14 in 5 categories of sanitation facilities, and 1 for other facilities. In the case of sanitation facilities, there is no case where it was evaluated as a park. If the park does not have an attached toilet, the park is certified as a building. Hence, it would be essential to establish the concept of an attached toilet and discuss the application of the evaluation index on the park sanitation facility. The score of buildings in parks and park facilities was lower than that of the self-evaluation results, and the certification grades of buildings declined in three cases. The items with the highest standard deviation were BF walking continuity for parks and the path to the main entrance among access roads for buildings. As a result of analyzing the park and building evaluation results of 19 common evaluation items except for sanitary facilities, the difference in the grades of the evaluation items for each case site except for one item appeared. Therefore, applying common detailed calculation criteria for items evaluated in common with parks and buildings is needed. Since sanitation facilities have no cases of park certification and are not certified as buildings, it is essential to establish the concept of attached toilets and discuss the application of park sanitation evaluation indicators. It is necessary to develop an evaluation index suitable for the characteristics of the park, such as adjusting the items that are not evaluated in parks and establishing an evaluation index considering the ones of parks. It expects that this study would be used as primary data for improving park certification indicators.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.17 no.4
• /
• pp.28-35
• /
• 2021

The need for zero-energy building is increasing as a means of actively responding to climate change. Since pipe insulation is a factor that minimizes heat loss of cooling and heating facilities, it is necessary to check pipe insulation standards and prepare improvement plans of preparation for certification of zero energy buildings. In this study, domestic pipe insulation standards were checked to prepare new insulation standards based on energy performance. Through the development of a pipe insulation calculation program, the heat loss according to the insulation thickness of the piping for mechanical facilities was compared and reviewed. As a result, applying the insulation thickness of the KCS standard for the same conditions increased the heat loss by an average of 10% compared to the ASHRAE standard. For this reason, it is necessary to revise the pipe insulation thickness standard in consideration of heat loss due to thermal conductivity and pipe insulation thickness. Using the program in this paper, it is possible to design pipe insulation based on energy performance and help to determine the standard for pipe insulation thickness.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04c
• /
• pp.61-63
• /
• 2003

최근 소프트웨어 품질에 대한 관심이 높아짐에 따라 그에 따른 기반 기술들이 요구되고 있다. 산업분야에 있어서도 작업을 수행하는 기계장치의 성능향상을 위해서 소프트웨어가 차지하는 중요성이 점점 증가함에 파라 해당 장치에 대한 성능은 물론 품질에 있어서도 소프트웨어의 중요도가 크게 향상됐다 이러한 시대적 흐름에 따라 산업분야에 있어서 내장형 소프트웨어의 일종인 산업용 소프트웨어에 대한 품질인증.평가체계를 구축하고 이를 활용하여 산업용 소프트웨어 국제표준 적합성 인증 시스템을 설계 구현하고자 한다.

• Journal of the Korean Professional Engineers Association
• /
• v.42 no.3
• /
• pp.32-34
• /
• 2009

The number of Construction Management Professional(CMP) is 2700 among 4600 of the total CMPs in Korea. Their characters and abilities are quite different from others. Because they must have 10 year field experiences, complete 180 hours CM oriented lectures and pass the certification test including written and interview in depth. And then, their level of standard is maintained by the Continuous Professional Development(CPD) program, periodic forum, case study seminar and CMP vision execution strategy sponsored by the CMP Association.

• Journal of Korean Institute of Industrial Engineers
• /
• v.26 no.4
• /
• pp.411-420
• /
• 2000

Among the standards of CALS, CITIS(Contractor Integrated Technical Information Service) is a standard in information share procedure which manages all data and services occurred between a contractor and a purchaser. CITIS services have some security problems like authentication problem and repudiation problem, when they are implemented using the Internet. To solve these problems, CITIS needs a user certificate system which can allow to access important information only to qualified users. This paper proposed a PKI(Public Key Infrastructure) Certificate Authority for CITIS, and created a real User Certificate System which can be adjusted to circumstances of real CITIS.

• Korean Security Journal
• /
• no.36
• /
• pp.255-292
• /
• 2013

Burglary (also called breaking and entering and sometimes housebreaking) is a crime, the essence of which is illegal entry into a building for the purposes of committing an offence. It is one of the most common types of crime and also a serious issue for every society. A house that is left insecure is an accessible and attractive target for burglars and therefore burglary resistance test & certification system for doors and windows has been developed in many countries. This paper explores several advanced foreign burglary resistance test/certifcation cases (the British SBD, the Dutch KOMO SKH/SKG, the Japanese CP mark, the Australian Standard Certification) for security products and domestic test/certification systems for fire safety products as a comparative study so that any improvement points can be gained for South Korea in the field of security product performance. The comparative analysis results show that South Korea is far behind the security product certification system and needs a lot of improvement in the system by benchmarking foreign cases. The domestic test/certification systems for fire safety products also give some insights for burglary-related security products' performance certification system in Korea. Overall, the need for relevant rules and regulations, the establishment of standards regarding testing and certification, including certified security +hardware product in building security certification system, performance testing as well as production testing (i.e. quality management system evaluation), the basic competency of testers, incentive system for certified/high quality security products were suggested in order to make an optimal model for the security production performance testing and certification system in Korea.

• 한국연소학회:학술대회논문집
• /
• 2014.11a
• /
• pp.111-112
• /
• 2014

Exhaust gas boiler system with respect to national and international safety standards, comparative study best suited to the realities of local exhaust and exhaust system manufacturing, certification standards and gas boiler installation, management, and mip draft inspection standards will proceed through this study.