• International Journal of Industrial Entomology and Biomaterials
• /
• 제16권2호
• /
• pp.61-66
• /
• 2008

In this paper, the regenerated silk fibroin (SF)/nylon 6 blend filaments were fabricated using wet spinning technique and the effect of coagulant on the post drawing and morphology of blend filaments was investigated. In the result of wet spinnability, methanol, acetone, DMF, and THF showed relatively good coagulation strength and fiber formation for the regenerated SF. On the contrary, they did not exhibit strong enough to produce a uniform nylon 6 filament due to the lack of coagulation strength. In the examination of post drawing performance, methanol showed the highest maximum draw ratio of the blend filament over all blend ratios. The maximum draw ratio of SF/nylon 6 blend filaments decreased with the reduction of SF content regardless of type of coagulant. SEM observation showed the consistent result with that of post-drawing performance. As SF content decreased, the uniform and regular structure was changed to irregular one. In particular, the severe macro-phase separation between SF and nylon 6 could be detected in the 50/50 SF/nylon 6 blend filaments coagulated in methanol and THF.

• 전기의세계
• /
• 제25권6호
• /
• pp.45-48
• /
• 1976

과거 수십년간 전력계통의 절연에 쓰여 온 공기에 대치하여 근년 고기압 SF$_{6}$gas에 의한 gas절연 방식이 급속도로 진전되고 있으며 거기에 수반하여 SF$_{6}$gas의 방전특성 해명이 초고압 장 gap영역에서 급선무로 되어 있다. 또한 초고압송전에 대응하는 각종 전력기기 cable등의 고기압 절연이 실용화 하게 되었으며 신뢰도가 높고 합리적인 gas 절연기기의 설계를 목표로 부성기체 특히 고기압 SF$_{6}$gas의 절연파괴 특성의 연구가 진행되고 있다. 고기압 SF$_{6}$gas는 높은 파괴 전체를 가지므로 극히 적은 원인으로도 절연 특성에 영향을 미치며 공기, 질소등 기체와는 매우 다른 방전 특성을 나타낸다. 여기서는 SF$_{6}$gas의 특이한 방전 특성과 고기압 SF$_{6}$gas 중에서의 impulse corona의 특성을 고찰하려고 한다.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제27권2호
• /
• pp.312-316
• /
• 2013

Caffeine is a thermogenic agent that can be used in weight loss products. In order to achieve a sustained release of caffeine, silk fibroin (SF) film was uses as carrier. It has been shown that the loading method of caffeine into SF film affected the uniform distribution of caffeine in the SF film. When caffeine was added directly into SF solution, gelation has been occurred immediately and prevented the uniform distribution of caffeine. On the other hand, caffeine was dissolved in methanol in order to load the caffeine in SF film and crystallize the SF film at the same time. However, due to the fast evaporation of methanol, caffeine was recrystallized on the surface of SF film rather than penetrating into the film. Finally, caffeine was loaded into pre-crystallized SF film and uniform distribution of caffeine could be achieved. There was an initial burst of caffeine during the first 15 min, but after that a sustained release was achieved.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1262-1263
• /
• 2011

Sulfur hexafluoride is the most commly used insulation gas in electrical systems. Gas insulated systems are widely used in the electric power industry for transmission and distribution of electrical energy. When $SF_6$ was first discovered, the potential application was only considered for insulation because of good dielectric properties. But the widespread use of $SF_6$ gas by electric power and other industries has led to increase concentrations of $SF_6$ gas in the atmosphere. This concern as to possible effects on global warming because $SF_6$ is a potent greenhouse gas. That's why firstly we studied uniform and nonuniform field property by mixing $SF_6$ and N2 gas. This paper presents the dielectric strength and insulating property for particle contamination under $SF_6/N_2$ mixtures. Two types of mixed gases(50% $SF_6$_50%$N_2$, 20% $SF_6$_80%$N_2$) were applied. We performed tests for the length and shape of particle. Test gas pressure is from 0.3 to 0.7 Mpa. The study was conducted to develop environment-friendly insulating material for GIS that can reduce $SF_6$ gas and make a design criteria for mixtures.

• 한국환경과학회지
• /
• 제22권1호
• /
• pp.83-89
• /
• 2013

Silicon carbide with aluminium oxide was used to remove the sulphur hexafluoride ($SF_6$) gas using microwave irradiation. The destruction and removal efficiencies (DREs) of $SF_6$ were studies as a function of various decomposition temperatures and microwave powers. The decomposition of $SF_6$ gas was analyzed using GC-TCD. XRD (X-ray powder diffraction) and XRF (X-ray Fluorescence Spectrometer) were used to characterize the properties of aluminum oxide. DREs of $SF_6$ were increased as the microwave powers were increased. Additive aluminium oxide on SiC increased the removal efficiencies and decreased the decomposition temperature. The XRD results show that the ${\gamma}-Al_2O_3$ was transformed to ${\alpha}-Al_2O_3$ during $SF_6$ decomposition by microwave irradiation. It was found that the best material to control $SF_6$ was SiC with $Al_2O_3$ 30 wt% in consideration of microwave energy consumption and $SF_6$ decomposition rate.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1403-1406
• /
• 2002

Environmental impact of human activities has become a great concern in most of the countries world-wide, and for years. It has recently focused on potential climate changes due to the increase of green house gases content in the atmosphere. One of these gases is $SF_6$, which is an essential material in electrical applications having excellent dielectric and arc-quenching properties. Though the actual contribution of $SF_6$ to global warming is negligible at present, the control of $SF_6$ emissions seems to be nevertheless imperative. Actually, it is listed in the Kyoto protocol that emissions should not only be duly reported but also the electrical industry which is now the major user of this gas must be able to show that it is possible to use this gas and at the same time preserve the environment. For the development of environmentally-benign electric power equipment and systems, novel gases or gas mixtures are strongly required as the alternatives of $SF_6$ gas. Until now, most research work is focused on the $SF_6/N_2$ mixed gas which is suitable for application in the electrical apparatus with slightly non-uniform fields. Recently, $SF_6/CO_2$ mixed gas also is expected to be promising as a $SF_6$ alternative, especially in highly non-uniform fields and in a gas-impregnated film insulation system. Including these results, the author reviews the research trend or reducing the environmental impact of $SF_6$ gas in this paper.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.541-544
• /
• 2009

$SF_6$는 이산화탄소의 23,900배의 지구온난화지수를 가지는 온실가스로서 절연성이 뛰어나 산업 분야에 많이 사용되고 있다. 본 연구에서는 질소+$SF_6$로 구성된 혼합기체로 부터 $SF_6$를 효과적으로 분리/회수하기 위하여 가스 하이드레이트 형성을 이용한 방법을 제안하였다. 본 실험은 275-290 K의 온도범위와 3-30 bar의 압력범위에서 질소 + $SF_6$ (10, 30, 50, 70%)의 혼합기체를 사용하여 각 조성에 따른 하이드레이트(H)-물(LW)-기상(V)의 3상 평형점을 측정하였다. 또한, 고체의 하이드레이트 내부에 포집된 혼합기체의 조성과 포집되지 않은 기상의 조성을 분석함으로써 하이드레이트 형성을 이용한 공정에서의 기체분리효율을 파악할 수 있었다. 또한, 하이드레이트 생성반응 동안 시간에 따른 혼합기체의 조성변화를 측정하였다. 276.15 K에서 50%의 $SF_6$가 포함된 혼합기체가 하이드레이트를 형성을 경우 하이드레이트상에는 85%의 $SF_6$가 포집다는 것을 알 수 있었다. 본 실험에서 얻어진 결과는 하이드레이트를 이용한 $SF_6$ 분리 공정의 중요한 기초 자료가 되며 다른 혼합 기체의 분리 공정에도 응용될 수 있을 것이다.

• 한국진공학회지
• /
• 제18권6호
• /
• pp.481-487
• /
• 2009

탄소나노필라멘트의 직경크기를 조절하기 위하여 증착 반응초기에 $SF_6$를 증착원료기체($C_2H_2$, $H_2$)에 주입하였다. 증착 원료 기체와 $SF_6$를 열화학기상증착시스템에서 시간에 따라 싸이클릭 유량 변조시켰다. 싸이클릭 유량 변조 프로세스와 기판의 온도에 따라 기판위에 증착된 탄소나노필라멘트들의 특성을 조사하였다. 싸이클릭 에칭기간에 $SF_6$를 투입하자 탄소나노필라멘트의 직경크기는 급격히 감소하였다. 이러한 탄소나노필라멘트 직경의 크기 감소 원인은 $SF_6$ 기체의 주입에 따른 에칭능력 향상에 기인하는 것으로 이해되었다.

• 전기학회논문지
• /
• 제57권12호
• /
• pp.2199-2201
• /
• 2008

Sulfur hexafluoride($SF_6$) is a gaseous dielectric used in high voltage electrical equipment such as an insultor or arc quenching medium in the transmission and distribution of electricity. however, $SF_6$ is one of the greenhouse gases(GHG) with a global warming potential that is 23,900 times greater than that of carbon dioxide($CO_2$). for this reason, $SF_6$ emissions in electric equipment shall be controlled to reduce GHG and improve cost-effective use of $SF_6$ for economical benefits. Until recently there has not been any investigation on $SF_6$ emission characteristics and inventory in Korea. To understand emission characteristics during the use-phase, the scope of this study was limited to the following closed pressure system equipment from 10 substations in Korea. This study highlights (1) the investigation of sampling/analysis methodology for $SF_6$ emissions in high voltage equipment, (2) the estimation of $SF_6$ emissions in the use-phase, and (3) the comparison between the emission ratio and the mass-balance applied to inventory study. According to this study, the majority of emissions were related to electric equipment nameplates and the rest of the emissions were related to the handling of $SF_6$ during operations. from this result, emission ratios estimated from this study were similar; GIS was 14% and GCB was 13%, as maintenance process conditions were the same as manual process conditions for both equipment.

• 조명전기설비학회논문지
• /
• 제21권2호
• /
• pp.20-27
• /
• 2007

정보화 시대로 변화함에 따라 고품질 전력의 중요성이 강조되고 있으며 이를 보장하기 위한 전력기기 운전의 신뢰성 향상이 선결과제로 대두되었다. 특히 대용량 전력기기 중 개폐기와 차단기의 성능을 일정 수준 이상으로 유지하기 위한 예방진단기술이 발달되어 왔다. 개폐기와 차단기에서 많이 사용되는 $SF_6$ 가스의 절연성능을 검출하여 유지보수 여부를 결정하는 것이 매우 중요하다. 본 연구에서는 이러한 $SF_6$ 가스의 절연성능을 검출하기 위해 사용되는 여러 가지 방법 중에 전기방전에 의해 나타나는 여러 현상을 검출하는 센서들의 기초특성을 확인하고 파악된 특성을 통해 복수의 검출센서를 사용할 것을 제안하였다. 즉 코로나 방전이나 아크방전 시에도 사용할 수 있는 UHF 센서와 방전전류 검출기를 병용하는 것이 $SF_6$ 가스의 절연성능 확인에 유리할 것으로 판단되었다. 이외에도 가스센서를 이용한 $SF_6$ 가스의 절연상태 검출을 시도해 그 가능성을 시험해 보았다.