• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.6
• /
• pp.1602-1613
• /
• 2016

Since Ballast Water Management Convention has been adopted, Ballast Water Management Convention is not effected yet. This convention will only enter into force 12 months after its ratification by 30 states, collectively representing 35% of world merchant shipping tonnnage. Morocco, Indonesia and Ghana have ratified this convention during last 29th IMO Assembly meeting which was held in November 2015. In 2016, Belgium, Fiji, Saint Lucia and Peru have become the latest countries to ratify the convention. As of now, 51 states and 34.87% combined merchant fleets are being calculated. BWM convention will be applied to not only new ships but also, existing ships after it is effected. Thus, existing vessel will be retrofitted a Ballast Water Treatment System according to D-2 Requirement until first IOPP nenewal survey after date of entry into force of the convention. Currently, about 65 BWTSs certified by Administration will be reported to IMO, even type of BWTSs is very various. Thus, a risk of each BWTS can be existed, and this existed risk can be also effected to ship's crew safety and protection of ship's own property. Therefore, we have evaluated a risk assessment for an existing vessel retrofitting an ultra violet type Ballast Water Treatment System which is mostly developed in the world. And we described the procedure of selecting a sample vessel, consequently, bulk carrier is selected because this vessel kind is mostly charged in the world. Especially, DWT 175K size is selected. Risk Assessment is using a HAZID and HAZOP method, evaluation method is referred to IMO Document "Considerated test of the Guidelines for Formal Safety Assessment (FSA) for use in the IMO rule-marking process(MSC/Circ.1203-MEPC/Circ.392)". The Risk Assessment Section is decided to 3 Nodes, Consequently, total risks have evaluated 51 items.

• Journal of Fisheries and Marine Sciences Education
• /
• v.29 no.3
• /
• pp.665-676
• /
• 2017

Over the past several years, sea trade have increased traffic by ships which highlighted a problem of unwanted species invading the surrounding seas through ship's ballast water discharge. Maritime trade volume has continuously increased worldwide and the problem still exists. The respective countries are spending billions of dollars in an effort to clean up the contamination and prevent pollution. As part of an effort to solve marine environmental problem, BWM(Ballast Water Management) convention was adopted at a diplomatic conference on Feb. 13 2004. In order to comply harmoniously this convention by each country. This convention will be effective after 12 months from the date which 30 countries ratified accounting for more than 35% of the world merchant shipping volume. On Sep. 8 2016, Finland ratified this convention and effective condition was satisfied as 52 states and world merchant vessel fleet 35.1441%. Thus, after Sep. 8 2017, all existing vessels shall be equipped with BWTS(Ballast Water Treatment System) in accordance with D-2 Regulation, which physically handles ballast water from ballast water exchange system(D-1 Regulation). In this study, we analyzed in detail the optimal design method using the Risk Analysis and Evaluation technique which is mainly used in the manufacturing factory or the risky work site comparing with the traditional design concept method applying various criteria. The Risk Assessment Method is a series of processes for finding the Risk Factors in the design process, analyzing a probility of the accident and size of the accident and then quantifying the Risk Incidence and finally taking measures. In this study, this method was carried out for Electrolysis treatment type on DWT 180K Bulk Carrier using "HAZOP Study" method among various methods. In the Electrolysis type, 63 hazardous elements were identified.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1995.11a
• /
• pp.125-152
• /
• 1995

An Integrated Bridge System (IBS) is not an officially defined term, but a concept of which integrates on a consol at bridge the primary functions of stand-alone navigational aids and communication instruments or of stand-alone units which are integrated i.e. ARPA ECDIS It aims to enable officers on navigational watch to perform their duty without impairing proper lookout. IBS has been taking shape through a rapid development of navigation and communication systems in relation with bridge configuration bridge work station and one man bridge operation system. IBS related matters have been considered for years and is on the agenda of the International Maritime Organization(IMO) for its technical details and safety aspect of possible one-man watchkeeping at night. However IMO has made it clear that human element should be the key factor in considering IBS and single watchkeeping issue. In the development of IBS ergonomic element and human psychological aspect have been more emphasized than technical requirements. This paper refers to documents presented to the IMO and its progress made in various IMO technical meetings on the development of IBS which is perceived as an effective aid to proper bridge lookout and those standards adopted by classification societies on the composition of workstation at bridge in order to identify the international trend on regulating required equipment function of workstation of IBS the regulatory review process and technical recommendations related thereto.

• Journal of the Korean institute of surface engineering
• /
• v.46 no.3
• /
• pp.120-125
• /
• 2013

This investigation was to identify the electrochemical corrosion protection conditions to minimize the cavitation damage by generating hydrogen gas with the means of hydrogen overvoltage before the impact pressure of the cavity is transferred to the surface. The hybrid potentiostatic test method is designed to evaluate a complexed cavitation and electrochemical characteristic for ALBC3 alloy that is diverse and its broad applications fields in marine industry. The surface observation showed that neither the cavitation damage nor the electrochemical damage by the hydrogen gas generation occurred in the potential of -2.6 V under the cavitation environment. In the potentiostatic experiments under the cavitation environment, the cavities were reflected or cancelled out by the collision of the cavities with the hydrogen gas generated by the hydrogen overvoltage.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.5
• /
• pp.496-504
• /
• 2012

In the field of environmental protection, close co-operation between Contracting Parties is strongly required and the reporting obligation under MARPOL 73/78 is playing an important role as a part of international co-operation for the environmental protection. In this paper, I review the meaning of reporting obligation under MARPOL 73/78 from the perspective of the international law, and investigate the status of implementation for the reporting obligation. For this purpose, I analyze status of implementation for last 10 years from 2001 to 2010 regarding reporting obligations under MARPOL 73/78 in accordance with MEPC/Circ.318. Finally, I suggest the way forward to improve Contracting Parties' compliance with reporting obligations through this analysis.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.29 no.3
• /
• pp.24-33
• /
• 2021

Although it is the first transportation method to apply the 'Ground Effect' applied to aircraft to ships, WIG ships, which are classified as 'Ships' operating on the water under international law. The pilot aptitude test, which has the effect of preventing safety accidents in advance, has not yet been established as a legal system in S. Korea, after being certified by the Korean Register of Shipping (KR) for the first time in the world in March 2020. Therefore, the purpose of this study is to ensure that identifying the importance, recognition, correlation, etc. of the tools and items of aptitude testing, from a group of experts, can be used appropriately for future development of legal aptitude testing tools. As a method of study, the questionnaire method was used, and the analysis confirmed that the tools used on aircraft and ships could be used appropriately. In particular, Due to the characteristics of the WIG ships, it was confirmed that it is necessary to develop more specifically in the future, the operational qualifications and physical fitness items, which are the aptitude evaluation items.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.9
• /
• pp.806-813
• /
• 2013

For the past years, higher power rating 2 stroke super long stroke diesel engines having more than 8 cylinders and larger cylinder bore are installed mainly on very large containerships to save on fuel consumption. However, these engines are prone to X-mode vibration due to 2nd node torsional vibration or the X-type moment, particularly because of the increase in total length and height. Recently, cases of excessive X-mode vibration often occurred on engine's major components. This vibration is manifested also as secondary vibration causing failure in engine-mount large structures. This study investigated the excitations caused by the 2nd node propulsion shafting torsional vibration that influence X-mode vibration of the main engine and practical countermeasures are proposed. An 8RT-flex82T 8 cylinder engine and 11S90ME-C 11 cylinder engine for a container ship was used as research model.

• Korean Institute of Interior Design Journal
• /
• v.20 no.4
• /
• pp.201-210
• /
• 2011

This study is on the space planning of accommodation area in accommodation barge, which is a kind of offshore plant supply vessel providing workers with exclusive accommodation facilities. Firstly, the space layout of accommodation area is analyzed using the general arrangement drawings of 10 actually-built accommodation barges currently in use. Secondary, the design guides and standards for living quarters of offshore plants issued from overseas classification societies such as ABS, NORSOK etc. are analyzed and based on the analysis design guidelines for accommodation area of accommodation barge are newly suggested. Thirdly, a model of accommodation area in accommodation barge is set up and space arrangements and movement lines for each deck of the accommodation area of the model are planned. Fourthly, cabins, dinning room and galley, recreation spaces, and sanitary spaces of the accommodation area of the model are planned. The results of this study may be summarized as follows. An accommodation barge has 'barge deck' for small scale work and material storage, and 'accommodation area' for the living and resting of workers. The accommodation area is made of workers accommodation sector, service sector, crew sector and business sector. The interior design guidelines for accommodation area of accommodation barge should be made soon by Korea Register of Shipping.

• Korean Journal of Computational Design and Engineering
• /
• v.20 no.2
• /
• pp.193-209
• /
• 2015

For reasons such as global warming, depletion of fossil fuels and the danger of nuclear energy the research and development of renewable energy is actively underway. Wind energy has advantages over another renewable energy in terms of location requirements, energy efficiency and reliability. Nowadays the research and development area is expanded to offshore because it can supply more wind reliability and free from noise pollution. In this study, the monopile offshore wind turbine transportation and installation (T&I) process are investigated. In addition, the schedule and cost for the process are estimated by discrete event simulation. For the simulation, simulation models for various means of T&I are developed. The optimum T&I execution plan with shortest duration and lowest cost can be found by using different mission start day and T&I means.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.7
• /
• pp.1003-1012
• /
• 2008

A three dimensional numerical study has been applied to predict the turbulent fluid flow and heat transfer characteristics for the rectangular channel with different types of baffles. Four different types of the baffles are used. The inclined baffles have the width of 19.8 cm, the square diamond type hole having one side length of 2.55 cm, and the inclination angle of $5^{\circ}$. Reynolds number is varied between 23,000 and 57,000. The SST k-${\omega}$ turbulence model is used in the present numerical study. The validity of the numerical results is examined with the experimental data. The numerical results of the flow field depict that the flow patterns around the different baffle type are entirely different and it significantly affects the local heat transfer characteristics. The heat transfer and friction factor depend significantly on the number of baffle holes. It is found that the heat transfer enhancement of baffle type II (3 hole baffle) has the best values.