• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.5
• /
• pp.353-360
• /
• 1984

As an effort to expand the utilization of mackerel which has been thought disadvantageous to processors due to the defects in bloody dark color of meat, high content of lipid, and low stability of protein, and to develope a new type of product, so called, preservative fish meat paste, the processing method was studied in which dielectric heating was applied by means of cooking, pasteurization, dehydration, and control of water activity. The principle of this method is based on that dielectric heating can initiate a rapid dispersion or displacement of moisture in the meat tissue so that the level of water acivity can be controlled by dehydration with hot air meanwhile the product is cooked, pasteurized, and texturized. And the product is finally heated with electric heaters and vacuum sealed to stabilize water activity and storage stability. In present paper, a formula for preparing the fish meat-stach paste, the conditions of dielectric heating and dehydration, shape and size of the product, and other parameters were tested to optimize the process operation. A formula of the fish meat-starch paste to provide proper textural properties and water activity was $10\%$ starch, $1.5\%$ salt, $3\%$ soybean, $0.6\%$ MSG, $2\%$ sucrose, and $3\%$ sorbitol against the weight of fish meat. A proper shape and size of the product to avoid foaming and case hardening during heating was sliced disc of 8 cm $diameter{\times}0.8$ cm thickness or $10{\times}10$ cm square plate with 1.0 cm thickness. The disc shape was recommended because it resulted more uniform heating, minimum foaming and case hardening. And it was also advantageous that disc was simply provided when the fish meat disc was stuffed in the same, solidified in boiling water for 2 to 3 minutes, and sliced. Condition of dielectric heating was critical to decide the levels of sterility, water activity, and textural property of the product. The temperature at the center of the meat disc slices was raised up to $95^{\circ}C$ in 1.5 minutes so that continuous exposure to microwave caused expanded tissue and hardening ending up with a higher water content. Heating for 5 to 6 minutes was adequate to yield the final water activity of 0.86 to 0.83(35 to $40\%$ moisture). It is important, however, that heating had to be done periodically, for instance, in the manner of 2.0, 1.5, 1.5, and 1.0 minute to give enough time to displace or evaporate moisture from the meat tissue. The product was dehydrated for 2 to 3 minutes by hot air of $60^{\circ}C$, 3 to 5m/sec and finally exposed to electric heaters for 5 to 6 minutes until the surface was roasted deep brown. These conditions of heating and dehydration resulted in a complete reduction of total plate count from an initial count of $5.3{\times}10^6/g$ to less than $3{\times}10^2/g$. General composition of the product was $40.1\%$ moisture, $20.8\%$ protein, $17.4\%$ lipid, $16.2\%$ carbohydrate, and $5.5\%$ ash. Textural properties revealed folding test AA, hardness 42, cohesiveness 0.53, toughness 4.6, and elasticity 0.8.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.2
• /
• pp.148-156
• /
• 2008

Statement of problems: Self-etch adhesives exhibit some clinical benefits such as ease of manipulation and reduced technique-sensitivity. Nevertheless, some concern remains regarding the bonding effectiveness of self-etch adhesives to enamel, in particular when so-called 'mild' self-etch adhesives are employed. This study compared the microtensile bond strengths to ground enamel of the two-step self-etch adhesive Clearfil SE Bond (Kuraray) to the three-step etch-and- rinse adhesive Scotchbond Multi-Purpose (3M ESPE) and the one-step self-etch adhesive iBond (Heraeus Kulzer). Purpose: The purpose of this study was to determine the effect of a preceding phosphoric acid conditioning step on the bonding effectiveness of a two-step self-etch adhesive to ground enamel. Material and methods: The two-step self-etch adhesive Clearfil SE Bond non-etch group, Clearfil SE Bond etch group with prior 35% phosphoric acid etching, and the one-step self-etch adhesive iBond group were used as experimental groups. The three-step etch-and-rinse adhesive Scotchbond Multi-Purpose was used as a control group. The facial surfaces of bovine incisors were divided in four equal parts cruciformly, and randomly distributed into each group. The facial surface of each incisor was ground with 800-grit silicon carbide paper. Each adhesive group was applied according to the manufacturer's instructions to ground enamel, after which the surface was built up using Light-Core (Bisco). After storage in distilled water at $37^{\circ}C$ for 1 week, the restored teeth were sectioned into enamel beams approximately 0.8*0.8mm in cross section using a low speed precision diamond saw (TOPMET Metsaw-LS). After storage in distilled water at $37^{\circ}C$ for 1 month, 3 months, microtensile bond strength evaluations were performed using microspecimens. The microtensile bond strength (MPa) was derived by dividing the imposed force (N) at time of fracture by the bond area ($mm^2$). The mode of failure at the interface was determined with a microscope (Microscope-B nocular, Nikon). The data of microtensile bond strength were statistically analyzed using a one-way ANOVA, followed by Least Significant Difference Post Hoc Test at a significance level of 5%. Results: The mean microtensile bond strength after 1 month of storage showed no statistically significant difference between all adhesive groups (P>0.05). After 3 months of storage, adhesion to ground enamel of iBond was not significantly different from Clearfil SE Bond etch (P>>0.05), while Clearfil SE Bond non-etch and Scotchbond Multi-Purpose demonstrated significantly lower bond strengths (P<0.05), with no significant differences between the two adhesives. Conclusion: In this study the microtensile bond strength to ground enamel of two-step self-etch adhesive Clearfil SE Bond was not significantly different from three-step etch-and-rinse adhesive Scotchbond Multi-Purpose, and prior etching with 35% phosphoric acid significantly increased the bonding effectiveness of Clearfil SE Bond to enamel at 3 months.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.1041-1043
• /
• 1993

Fuzzy logic based Control Theory has gained much interest in the industrial world, thanks to its ability to formalize and solve in a very natural way many problems that are very difficult to quantify at an analytical level. This paper shows a solution for treating membership function inside hardware circuits. The proposed hardware structure optimizes the memoried size by using particular form of the vectorial representation. The process of memorizing fuzzy sets, i.e. their membership function, has always been one of the more problematic issues for the hardware implementation, due to the quite large memory space that is needed. To simplify such an implementation, it is commonly [1,2,8,9,10,11] used to limit the membership functions either to those having triangular or trapezoidal shape, or pre-definite shape. These kinds of functions are able to cover a large spectrum of applications with a limited usage of memory, since they can be memorized by specifying very few parameters ( ight, base, critical points, etc.). This however results in a loss of computational power due to computation on the medium points. A solution to this problem is obtained by discretizing the universe of discourse U, i.e. by fixing a finite number of points and memorizing the value of the membership functions on such points [3,10,14,15]. Such a solution provides a satisfying computational speed, a very high precision of definitions and gives the users the opportunity to choose membership functions of any shape. However, a significant memory waste can as well be registered. It is indeed possible that for each of the given fuzzy sets many elements of the universe of discourse have a membership value equal to zero. It has also been noticed that almost in all cases common points among fuzzy sets, i.e. points with non null membership values are very few. More specifically, in many applications, for each element u of U, there exists at most three fuzzy sets for which the membership value is ot null [3,5,6,7,12,13]. Our proposal is based on such hypotheses. Moreover, we use a technique that even though it does not restrict the shapes of membership functions, it reduces strongly the computational time for the membership values and optimizes the function memorization. In figure 1 it is represented a term set whose characteristics are common for fuzzy controllers and to which we will refer in the following. The above term set has a universe of discourse with 128 elements (so to have a good resolution), 8 fuzzy sets that describe the term set, 32 levels of discretization for the membership values. Clearly, the number of bits necessary for the given specifications are 5 for 32 truth levels, 3 for 8 membership functions and 7 for 128 levels of resolution. The memory depth is given by the dimension of the universe of the discourse (128 in our case) and it will be represented by the memory rows. The length of a world of memory is defined by: Length = nem (dm(m)＋dm(fm) Where: fm is the maximum number of non null values in every element of the universe of the discourse, dm(m) is the dimension of the values of the membership function m, dm(fm) is the dimension of the word to represent the index of the highest membership function. In our case then Length=24. The memory dimension is therefore 128*24 bits. If we had chosen to memorize all values of the membership functions we would have needed to memorize on each memory row the membership value of each element. Fuzzy sets word dimension is 8*5 bits. Therefore, the dimension of the memory would have been 128*40 bits. Coherently with our hypothesis, in fig. 1 each element of universe of the discourse has a non null membership value on at most three fuzzy sets. Focusing on the elements 32,64,96 of the universe of discourse, they will be memorized as follows: The computation of the rule weights is done by comparing those bits that represent the index of the membership function, with the word of the program memor . The output bus of the Program Memory (μCOD), is given as input a comparator (Combinatory Net). If the index is equal to the bus value then one of the non null weight derives from the rule and it is produced as output, otherwise the output is zero (fig. 2). It is clear, that the memory dimension of the antecedent is in this way reduced since only non null values are memorized. Moreover, the time performance of the system is equivalent to the performance of a system using vectorial memorization of all weights. The dimensioning of the word is influenced by some parameters of the input variable. The most important parameter is the maximum number membership functions (nfm) having a non null value in each element of the universe of discourse. From our study in the field of fuzzy system, we see that typically nfm 3 and there are at most 16 membership function. At any rate, such a value can be increased up to the physical dimensional limit of the antecedent memory. A less important role n the optimization process of the word dimension is played by the number of membership functions defined for each linguistic term. The table below shows the request word dimension as a function of such parameters and compares our proposed method with the method of vectorial memorization[10]. Summing up, the characteristics of our method are: Users are not restricted to membership functions with specific shapes. The number of the fuzzy sets and the resolution of the vertical axis have a very small influence in increasing memory space. Weight computations are done by combinatorial network and therefore the time performance of the system is equivalent to the one of the vectorial method. The number of non null membership values on any element of the universe of discourse is limited. Such a constraint is usually non very restrictive since many controllers obtain a good precision with only three non null weights. The method here briefly described has been adopted by our group in the design of an optimized version of the coprocessor described in [10].

• Journal of the Korean Society of Groundwater Environment
• /
• v.7 no.3
• /
• pp.103-115
• /
• 2000

The formation of brown-colored precipitates is one of the serious problems frequently encountered in the development and supply of groundwater in Korea, because by it the water exceeds the drinking water standard in terms of color. taste. turbidity and dissolved iron concentration and of often results in scaling problem within the water supplying system. In groundwaters from the Pajoo area, brown precipitates are typically formed in a few hours after pumping-out. In this paper we examine the process of the brown precipitates' formation using the equilibrium thermodynamic and kinetic approaches, in order to understand the origin and geochemical pathway of the generation of turbidity in groundwater. The results of this study are used to suggest not only the proper pumping technique to minimize the formation of precipitates but also the optimal design of water treatment methods to improve the water quality. The bed-rock groundwater in the Pajoo area belongs to the Ca-$HCO_3$type that was evolved through water/rock (gneiss) interaction. Based on SEM-EDS and XRD analyses, the precipitates are identified as an amorphous, Fe-bearing oxides or hydroxides. By the use of multi-step filtration with pore sizes of 6, 4, 1, 0.45 and 0.2 $\mu\textrm{m}$, the precipitates mostly fall in the colloidal size (1 to 0.45 $\mu\textrm{m}$) but are concentrated (about 81%) in the range of 1 to 6 $\mu\textrm{m}$in teams of mass (weight) distribution. Large amounts of dissolved iron were possibly originated from dissolution of clinochlore in cataclasite which contains high amounts of Fe (up to 3 wt.%). The calculation of saturation index (using a computer code PHREEQC), as well as the examination of pH-Eh stability relations, also indicate that the final precipitates are Fe-oxy-hydroxide that is formed by the change of water chemistry (mainly, oxidation) due to the exposure to oxygen during the pumping-out of Fe(II)-bearing, reduced groundwater. After pumping-out, the groundwater shows the progressive decreases of pH, DO and alkalinity with elapsed time. However, turbidity increases and then decreases with time. The decrease of dissolved Fe concentration as a function of elapsed time after pumping-out is expressed as a regression equation Fe(II)=10.l exp(-0.0009t). The oxidation reaction due to the influx of free oxygen during the pumping and storage of groundwater results in the formation of brown precipitates, which is dependent on time, $Po_2$and pH. In order to obtain drinkable water quality, therefore, the precipitates should be removed by filtering after the stepwise storage and aeration in tanks with sufficient volume for sufficient time. Particle size distribution data also suggest that step-wise filtration would be cost-effective. To minimize the scaling within wells, the continued (if possible) pumping within the optimum pumping rate is recommended because this technique will be most effective for minimizing the mixing between deep Fe(II)-rich water and shallow $O_2$-rich water. The simultaneous pumping of shallow $O_2$-rich water in different wells is also recommended.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.5
• /
• pp.321-327
• /
• 2006

In Korea, there is a growing competitive for water resources between industrial, domestic and agricultural consumer, and the environment as many other OECD countries. The demand on water use is also affecting aquatic ecosystems particularly where withdrawals are in excess of minimum environmental needs for rivers, lakes and wetland habits. OECD developed three indicators related to water use by the agriculture in above contexts : the first is a water use intensity indicator, which is expressed as the quantity or share of agricultural water use in total national water utilization; the second is a water stress indicator, which is expressed as the proportion of rivers (in length) subject to diversion or regulation for irrigation without reserving a minimum of limiting reference flow; and the third is a water use efficiency indicator designated as the technical and the economic efficiency. These indicators have different meanings in the aspect of water resource conservation and sustainable water use. So, it will be more significant that the indicators should reflect the intrinsic meanings of them. The problem is that the aspect of an overall water flow in the agro-ecosystem and recycling of water use not considered in the assessment of agricultural water use needed for calculation of these water use indicators. Namely, regional or meteorological characteristics and site-specific farming practices were not considered in the calculation of these indicators. In this paper, we tried to calculate water use indicators suggested in OECD and to modify some other indicators considering our situation because water use pattern and water cycling in Korea where paddy rice farming is dominant in the monsoon region are quite different from those of semi-arid regions. In the calculation of water use intensity, we excluded the amount of water restored through the ground from the total agricultural water use because a large amount of water supplied to the farm was discharged into the stream or the ground water. The resultant water use intensity was 22.9% in 2001. As for water stress indicator, Korea has not defined nor monitored reference levels of minimum flow rate for rivers subject to diversion of water for irrigation. So, we calculated the water stress indicator in a different way from OECD method. The water stress indicator was calculated using data on the degree of water storage in agricultural water reservoirs because 87% of water for irrigation was taken from the agricultural water reservoirs. Water use technical efficiency was calculated as the reverse of the ratio of irrigation water to a standard water requirement of the paddy rice. The efficiency in 2001 was better than in 1990 and 1998. As for the economic efficiency for water use, we think that there are a lot of things to be taken into considerations to make a useful indicator to reflect socio-economic values of agricultural products resulted from the water use. Conclusively, site-specific, regional or meteorogical characteristics as in Korea were not considered in the calculation of water use indicators by methods suggested in OECD(Volume 3, 2001). So, it is needed to develop a new indicators for the indicators to be more widely applicable in the world.

• The Journal of Korean Philosophical History
• /
• no.36
• /
• pp.101-133
• /
• 2013

In this paper, the writer investigated the thoughts on military art and science with a focus on the typical books on military art and science, which was published in the latter period of Joseon, and the discussion of literati in that time. Joseon had been happy to enjoy the piping times of peace for about 200 years ever since the establishment of the dynasty. However, having had to gone through two major wars, the Joseon Dynasty, revolving around scholarly people, had awakened the limits of military art and science of Joseon. It can be said that the countermeasure against Japanese pirates, which were reflected in the "Jingbirok" (懲毖錄 - Records of the 1592 Japanese Invasion) written by Yu Seong-ryong, and the experiences of war had formed the basis of the thoughts on military art and science in the latter period. Regrettably, there were no suggestions or proposals of preparing countermeasure against Japanese raiders in the books of military art and science in the early period of the Joseon Dynasty. Meanwhile, as the argument about the battle formation in the early period of Joseon, the process of establishing the military science had not gone smoothly in the latter period of Joseon. Right after the Japanese invasion of 1592, "Gihyo-Sinseo" (紀效新書 - New Text of Practical Tactics written by Cheok Gye-gwang) was brought into the country by the army of Ming (明) Dynasty. At first, this was used in the form of its original edition, or of abstract version in the military drill. But, later, it was published under the title of "Byeonghak-jinam" (兵學指南 - Military Training Manual about Action Rules by combat situation). This book, same as in Zhejian (浙江) province in China, had achieved a positive effect on counteracting the Japanese raiders in our country. However, these military tactics were conflicted with "Owi Jinbeop" - Rules of Deployment of the Five Military Commands, which had been handed down ever since the early period of the Joseon Dynasty, and, at the same time, it was pointed out that those tactics would not be able to apply to the situation uniformly, since Korea and China were geographically different. Furthermore, having gone through Manchu Invasion of 1636 (丙子胡亂, Byeongja horan) Joseon had used "Yeonbyeongsilgi" (練兵實記 - the Actual Records of Training Army), which was compiled in China on the basis of the experiences of wars against the nomad, including Mongolia and so on. And, this had become a typical training manual together with "Byeonghak-jinam". King Yeong Jo and King Jeong Jo of the Joseon Dynasty had tried to establish uniformity in military training by publishing the books of military science representing the latter period of Joseon such as "Sokbyeongjangdoseol" (續兵將圖說- Revision of the Illustrated Manual of Military Training and Tactics,) "Byeonghaktong" (兵學通 Book on Military Art and Science,) "Byeonghakjinamyeonui" (兵學指南演義 - Commentary on 'Byeonghak-jinam') and "Muyedobotongji"(武藝圖譜通志 - Comprehensive Illustrated Manual of Martial Arts,) and so on. King Jeong Jo had actively participated in the arguments in those days. So then the arguments that had been continued for about 200 years, ever since King Seon Jo, put to an end. To sum up the distinctive features of military art and science in both former and latter period of the Joseon Dynasty, in the former period of Joseon, the reasoning military science was proceeded with the initiative of civic official based on "Mugyeongchilseo"(武經七書- the Seven Military Classics). However, in the latter period of Joseon, "Gihyo-Sinseo"(紀效新書 - New Text of Practical Tactics written by Cheok Gye-gwang) had served as a momentum, and also comparatively a large numbers of military official had participated in arguments, so then such an occasion had made the military science turn into the Practical Theory. Meanwhile, King Sejo and King Jeong Jo had played a leading role in the process of establishing the theory of military science of Joseon, however, there are something in common that their succession to the throne was not smooth. This is the part that reminds us "War is an extension of politics," the thesis of Clausewitz

• The Korean Society of Law and Medicine
• /
• v.21 no.2
• /
• pp.105-162
• /
• 2020

In the pandemic of infectious disease, restrictions of individual liberty have been justified in the name of public health and public interest. In March 2020, the National Assembly of the Republic of Korea passed the revised bill of the 「Infectious Disease Control and Prevention Act.」 The revised bill newly established the legal basis for forced testing and disclosure of the information of confirmed cases, and also raised the penalties for violation of self-isolation and treatment refusal. This paper examines whether and how these individual liberty limiting clauses be justified, and if so on what ethical and philosophical grounds. The authors propose the theories of the philosophy of law related to the justifiability of liberty-limiting measures by the state and conceptualized the dual-aspect of applying the liberty-limiting principle to the infected patient. In COVID-19 pandemic crisis, the infected person became the 'Patient as Victim and Vector (PVV)' that posits itself on the overlapping area of 'harm to self' and 'harm to others.' In order to apply the liberty-limiting principle proposed by Joel Feinberg to a pandemic with uncertainties, it is necessary to extend the harm principle from 'harm' to 'risk'. Under the crisis with many uncertainties like COVID-19 pandemic, this shift from 'harm' to 'risk' justifies the state's preemptive limitation on individual liberty based on the precautionary principle. This, at the same time, raises concerns of overcriminalization, i.e., too much limitation of individual liberty without sufficient grounds. In this article, we aim to propose principles regarding how to balance between the precautionary principle for preemptive restrictions of liberty and the concerns of overcriminalization. Public health crisis such as the COVID-19 pandemic requires a population approach where the 'population' rather than an 'individual' works as a unit of analysis. We propose the second expansion of the harm principle to be applied to 'population' in order to deal with the public interest and public health. The new concept 'risk to population,' derived from the two arguments stated above, should be introduced to explain the public health crisis like COVID-19 pandemic. We theorize 'the extended harm principle' to include the 'risk to population' as a third liberty-limiting principle following 'harm to others' and 'harm to self.' Lastly, we examine whether the restriction of liberty of the revised 「Infectious Disease Control and Prevention Act」 can be justified under the extended harm principle. First, we conclude that forced isolation of the infected patient could be justified in a pandemic situation by satisfying the 'risk to the population.' Secondly, the forced examination of COVID-19 does not violate the extended harm principle either, based on the high infectivity of asymptomatic infected people to others. Thirdly, however, the provision of forced treatment can not be justified, not only under the traditional harm principle but also under the extended harm principle. Therefore it is necessary to include additional clauses in the provision in order to justify the punishment of treatment refusal even in a pandemic.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.4
• /
• pp.20-49
• /
• 2009

This paper explores the Korean royal tombs steles such as monumental steles and tombstone marks (神道碑, 表石) that are broadly fallen into the following three periods ; the 15~16th centuries, 17th~18th centuries, and 19th century. As a result, the royal tombs steles were built, unlike the private custom, on the heirs to the King's intentions. During the 15~17th centuries the construction and reconstruction of the monumental steles took place. In the late Joseon period, monumental steles had been replaced with a number of tombstone marks were built to appeal to the king's calligraphy carved on stone for the first time. During the Great Empire Han(大韓帝國) when the Joseon state was upgraded the empire, Emperors Gojong and Sunjong devoted to honor ancestors by rebuilding royal tombstone mark. Based on these periodical trends, it would not be exaggerated that the history of establishing the royal tombs steles formed in late Joseon. The type of royal tombs monuments originated from those of the Three Kingdoms era, a shapeless form, the new stele type of the Tang Dynasty (唐碑) has influenced on the building of monuments of the Unified Silla and Buddhist honorable monuments (塔碑) of the Goryeo Dynasty. From the 15th century, successive kings have wished to express the predecessors's achievements, nevertheless, the officials opposed it because the affairs of the King legacy (國史) were all recorded, so there is no need to establish the tombs steles. Although its lack of quantity, each Heonneung and Jereung monumental steles rebuilt in 1695 and 1744 respectively, is valuable to show the royal sculpture of the late Joseon period. Since the 15th century, the construction of the royal tombs monumental steles has been interrupted, the tombstone marks (boulders) with simpler format began to be erected within the tomb precincts. The Yeoneung tombstone mark(寧陵表石), built in 1682, shows the first magnificent scale and delicate sculpture technique. Many tombstone marks were erected since the 1740s on a large scale, largely caused by King Yeongjo's announce to the honorific business for the predecessors. Thanks to King Yeongjo's such appealing effort, over 20 pieces of tombstone marks were established during his reign. The fact that his handwritten calligraphic works first carved on tombstones was a remarkable phenomenon had never been appeared before. Since the 18th century, a double-slab high above the roof(加?石) and rectangular basement of the stele have been accepted as a typical format of the tombstone marks. In front of the stele, generally seal script calligraphic works after a Tang dynasty calligrapher Li Yangbing(李陽氷)'s brushwork were engraved. In 1897 when King Gojong declared the Empire, these tombstone marks were once again produced in large amounts. Because he tried to find the legitimacy of the Empire in the history of the Joseon dynasty and its four founding fathers in creating the monuments both of the front and back sides by carving his in-person-calligraphy as a ruler representing his symbolic authority. The tombstone marks made during this period, show an abstract sculpture features with the awkward techniques, and long and slim strokes. As mentioned above, the construction of monumental steles and tombstone marks is a historical and remarkable phenonenon to reveal the royal funeral custom, sculpture techniques, and successive kings' efforts to honor the royal predecessors.

• The Journal of Korean Society for Radiation Therapy
• /
• v.32
• /
• pp.41-52
• /
• 2020

Purpose: To find out the dosimetric usefulness, setup reproducibility and efficiency of applying 3D Bolus by comparing two treatment plans in which Commercial Bolus and 3D Bolus produced by 3D Printing Technology were applied to the neck during VMAT treatment of Hypopahrynx Cancer to evaluate the clinical applicability. Materials and Methods: Based on the CT image of the RANDO phantom to which CB was applied, 3D Bolus were fabricated in the same form. 3D Bolus was printed with a polyurethane acrylate resin with a density of 1.2g/㎤ through the SLA technique using OMG SLA 660 Printer and MaterializeMagics software. Based on two CT images using CB and 3D Bolus, a treatment plan was established assuming VMAT treatment of Hypopharynx Cancer. CBCT images were obtained for each of the two established treatment plans 18 times, and the treatment efficiency was evaluated by measuring the setup time each time. Based on the obtained CBCT image, the adaptive plan was performed through Pinnacle, a computerized treatment planning system, to evaluate target, normal organ dose evaluation, and changes in bolus volume. Results: The setup time for each treatment plan was reduced by an average of 28 sec in the 3D Bolus treatment plan compared to the CB treatment plan. The Bolus Volume change during the pretreatment period was 86.1±2.70㎤ in 83.9㎤ of CB Initial Plan and 99.8±0.46㎤ in 92.2㎤ of 3D Bolus Initial Plan. The change in CTV Min Value was 167.4±19.38cGy in CB Initial Plan 191.6cGy and 149.5±18.27cGy in 3D Bolus Initial Plan 167.3cGy. The change in CTV Mean Value was 228.3±0.38cGy in CB Initial Plan 227.1cGy and 227.7±0.30cGy in 3D Bolus Initial Plan 225.9cGy. The change in PTV Min Value was 74.9±19.47cGy in CB Initial Plan 128.5cGy and 83.2±12.92cGy in 3D Bolus Initial Plan 139.9cGy. The change in PTV Mean Value was 226.2±0.83cGy in CB Initial Plan 225.4cGy and 225.8±0.33cGy in 3D Bolus Initial Plan 224.1cGy. The maximum value for the normal organ spinal cord was the same as 135.6cGy on average each time. Conclusion: From the experimental results of this paper, it was found that the application of 3D Bolus to the irregular body surface is more dosimetrically useful than the application of Commercial Bolus, and the setup reproducibility and efficiency are excellent. If further case studies along with research on the diversity of 3D printing materials are conducted in the future, the application of 3D Bolus in the field of radiation therapy is expected to proceed more actively.

• (The)Study of the Eastern Classic
• /
• no.56
• /
• pp.35-73
• /
• 2014

This paper examined the poem world of Simjae(深齋) Cho Geung-seop(曺兢燮: 1873-1933) in the turning point of the modern era, focused on his Hwaunsi (和韻詩: Poems written by using the rhymes of other poets' poems). In his poems, there are lots of Hwaunsi on the poems of Tu Fu(杜甫) and Su Shi(蘇軾), especially. This makes him regarded as a medieval poet, engaged in Chinese poem creation in the most traditional method in the turbulent period. Looking at the Hawunsi(和韻詩) alone, Simjae's creative life became the starting point of turnaround at around 40 years old. Before the age of 40, the poets in the Tang Dynasty and Song Dynasty and Ming Dynasty and Qing Dynasty and Korean figures like Lee Hwang(李滉), as well as Tu Fu and Su Shi were the subjects of his Hwanunsi. After the age of 40, some examples of writing poems using the rhymes of other poets' poems, especially Korean figures related to regions, are often found, reducing Hwaunsi on Tu Fu and Su Shi. Simjae called Tu Fu the integration of poets, talking about the integrity of poetic talent and his being highly proficient in mood and view. As reflecting such an awareness, the themes and moods and views are demonstrated diversely in Simjae's Hwaunsi. Although, he did not reveal his thinking about the poems of Su Shi, he seemed to love Su Shi's poems to some degree. The closeness to the original poems, the poems of Tu Fu are relatively higher than those of Su Shi. Roughly speaking, Simjae tried to find his own individuality, intending to follow Tu Fu, but, he seemed to attempt to reveal his intention using Su Shi's poems, rather than trying to imitate. To carefully examine, Simjae wrote Hwaunsi, but he did not just imitate, but revealed the aesthetics of comparison and difference. In many cases, he made new meanings by implanting his intentions in the poems, while sharing the opportunity of creation, rather than bringing the theme and mood and view as they are. The Hwaunsi on Su Shi's poems reveal the closeness to the original poems relatively less. This can be the trace of an effort to make his own theme and individuality, not being dominated by the Hwaun(和韻: using the rhymes of other poets' poems) entirely, as he used the creative method having many restrictions. However, it is noted that the Hwaunsi on Tu Fu's poems was not written much, after the age of 40. Is this the reason why he realized literary reality that he could not cope with anymore with only his effort within the Hwaunsi? For example, he wrote four poems by borrowing Su Shi's Okjungsi(獄中詩: poem written in jail) rhymes and also wrote Gujung Japje(拘中雜題), in 1919, while he was detained. In these poems, his complex contemplation and emotion, not restricted by any poet's rhymes, are revealed diversely. Simjae's Hwaunsi testifies the reality, in which Chinese poetry's habitus existed and the impressive existence mode at the turning point of the modern era. Although, the creation of Hwaunsi reflects his disposition of liking the old things, it is judged that his psychology, resisting modern characters' change, affected to some degree in the hidden side. In this regard, Simaje's Hwaunsi encounters limitation on its own, however, it has significance in that some hidden facts were revealed in the modern Chinese poetry history, which was captured with attention under the name of novelty, eccentricity and modernity.