• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.637-639
• /
• 2008

본 논문은 밀폐형 구조를 갖는 3.3kW급 태양광용 전력변환기 개발에 관한 내용을 설명한다. 3.3kW급 전력변환기는 무게, 부피, 효율적인 측면에서 장점을 갖는 무변압기형으로 동작범위가 넓고 실외형(IP65)으로 제작되어 설치 장소에 제약을 받지 않는다. 또한, 주변온도 $-20{\sim}50^{\circ}C$에서 동작이 가능하도록 설계 되었다.

• Design & Manufacturing
• /
• v.2 no.3
• /
• pp.16-21
• /
• 2008

In recent, the demands of household cases and disposable products is increased significantly because a living standard of newly-emerging nations was risen. Therefore, multi-cavity mold and stack mold for the realization of high-productivity have been researched in forefront nations. In this paper, CAE analysis for minimizing the mold core deformation was performed. Finally, 64 cavities injection mold for molding cap which has the insert-type core was fabricated according to the result of CAE analysis.

• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.4
• /
• pp.823-830
• /
• 2014

This study conducted to investigate the quality of commercial fish sauce and determine the grade of them by measuring the chemical compositions and biogenic amines. The commercial salt-fermented anchovy sauce contained 65.84-70.94% (mean : 68.39%) of moisture, 22.19-25.43% (24.22%) of salinity, 5.4-6.1 (5.8) of pH, 0.76-1.61%(1.18%) of total nitrogen, 478.52-924.66 mg/100 g (702.05 mg/100 g) of amino nitrogen and 584.59-1593.52 mg/kg of histamine. Whereas commercial salted-fermented sand lance sauces contained 66.63-71.99% (68.73%) of moisture, 23.9-25.5% (24.57%) of salinity, 5.5-6.4(6.16) of pH, 0.64-1.46% (1.07%) of total nitrogen, 433.51-1006.67 mg/100 g (665.36 mg/100 g) of amino nitrogen and 194.01-1839.68 mg/kg of histamine. Correlation of TN, AN and VBN containing nitrogen was high, but there was no significant correlation between these results and histamine. In total nitrogen content, 6 of the 20 fish sauces were less than Korea Food Standard. The eight samples were less than the amino nitrogen regulation of Korean Industrial Standard (KS). And 14 fish sauce were exceeded by 68% for moisture content standard of Korean Industrial Standard.

• Journal of Soil and Groundwater Environment
• /
• v.15 no.2
• /
• pp.18-23
• /
• 2010

Usability of soil quality monitoring network for ascertaining soil quality changes was evaluated by analysing soil quality monitoring results. Tolerance limits of soil quality monitoring results from 1997 to 2007 were calculated and compared with Korean soil quality standards. This study determined that soil quality was changed if the upper 95% tolerance limit value was greater than the soil quality standard. Fluoride most frequently exceeded the soil quality standard and nickel, zinc, arsenic, copper, lead and cadmium were followed. Analysis on land use showed that tolerance limits of industrial land use most frequently exceeded the soil quality standards and residential, road and various land uses then frequently exceeded. Tolerance limits of land uses expecting high contaminant loads frequently exceeded the soil quality standards. This fact imply that the soil quality monitoring network generates reasonable data to represent change in Korean soil quality. This study also suggested that representative sampling from well identified points should be done to improve data reliability and accurately ascertain soil quality changes.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.1
• /
• pp.78-90
• /
• 2023

Objectives: The purpose of this study is to standardize the process code of the work environment measurement database (WEMD) for the construction of a job-exposure matrix (JEM). Methods: The standard process code (SPC) was reclassified based on process similarity and drawing upon the code used in the existing K2B. It was supplemented through review by industrial hygiene experts. In addition, an index word database related to SPC was created and used for SPC search. A pilot evaluation project was conducted by experts to evaluate the validity of the newly reclassified standard process code. Results: A total of 70 final SPCs were developed, including 31 processes related to the construction industry. Using the Shiny program, we developed a standard code finder that can be used on the web (https://kscf.shinyapps.io/scf_app/). As a result of the pilot evaluation, it was determined that it was easier to search for standard codes than previous codes, so it was highly utilized. Conclusions: It is expected that JEM construction using industry-process information drawing on WEMD data will be possible using the 70 newly standardized process codes.

• Journal of Korean Institute of Industrial Engineers
• /
• v.32 no.1
• /
• pp.1-8
• /
• 2006

A modified PCF(Point Coordination Function) protocol with the optimal polling sequence is defined in detail and shown to improve the efficiency of the conventional PCF protocol in IEEE 802.11 wireless LAN standard. The problem for the optimal polling sequence is formulated as TSP(Travelling Salesman Problem) with the distance values of 1's or 0's. Numerical examples show that the optimal polling sequence increases the capacity of the real-time service such as VoIP(Voice over Internet Protocol).

• Journal of Korean Society for Quality Management
• /
• v.36 no.2
• /
• pp.20-27
• /
• 2008

Tolerance design has been identified as an important research area and a number of models have been proposed in the literature. This paper investigates the effect of limited capacity on tolerance design for products with nominal-the-best type (N-type) quality characteristics. The model is developed under the assumption that the reprocessed and nonreprocessed items are produced by the same manufacturing process and therefore their quality characteristics are identically and independently distributed. Profit models are constructed which involve four price/cost components; selling price, cost incurred by imperfect quality, reprocessing and quality inspection costs. Methods of finding the optimal tolerance limits are presented, and a numerical example is given. Sensitivity analyses are also performed to study the effect of a process standard deviation on this model.

• Journal of Korean Institute of Industrial Engineers
• /
• v.27 no.4
• /
• pp.374-378
• /
• 2001

We present a discrete-time version of the distributional Little's law, of which the continuous-time version is well known. Then we extend it to the queue in which two or more customers may depart at the same time. As a demonstration, we apply this law to various discrete-time queues such as the standard Geom/G/1 queue, the Geom/G/1 queue with vacations, the multi-server Geom/D/c queue, and the bulk-service Geom/$G^b$/1 queue. As a result, we obtain the probability generating functions of the numbers in system/queue and the waiting times in system/queue for those queues.

• Journal of Korean Society for Quality Management
• /
• v.36 no.4
• /
• pp.77-86
• /
• 2008

Due to the rapid growth in automated testing and manufacturing systems, screening inspection becomes very attractive. In this paper, we investigate the effects of limited capacity on screening inspection using a surrogate variable. The model is developed under the assumption that the reprocessed and nonreprocessed items are produced by the same manufacturing process and therefore their quality characteristics are independently and identically distributed. Profit models are constructed which involve four price/cost components; selling price, cost incurred by imperfect quality, reprocessing and quality inspection costs. Methods of finding the optimal screening limits are presented, and a numerical example is given. Sensitivity analyses are also performed to study the effect of a process standard deviation on this model.

• Journal of Korean Institute of Industrial Engineers
• /
• v.42 no.3
• /
• pp.241-248
• /
• 2016

Plant life cycle consists of design, construction, certification, operation, and maintenance phases, and various and enormous plant life cycle data is involved in each phase. Plant life cycle data should be linked with each other based on its proper relationships, so that plant operators can access necessary plant data during their regular operations and maintenance works. Currently, the relationships of plant life cycle data may not be defined explicitly, or they are scattered over several plant information systems. This paper proposes high level design of a plant life cycle data management system based on pre-defined plant life cycle database design. ISO-15926 standard is adapted for the database design. User-interface designs of the plant life cycle data management system are explained based on analysis of plant owners' requirements. A conceptual design of the database is also described with the entity-relationship diagram.