1 |
Owen, D.B., McIntire, D. and Seymour, E. (1975), Tables Using One or Two Screening Variables to Increase Acceptable Product Under One-Sided Specifications, Journal of Quality Technology Vol. 7, pp. 127-138
DOI
|
2 |
Bai, D.S., Kwon, H.M., and Lee, M.K. (1995), "An Economic Two-Stage Screening Procedure with a Prescribed Outgoing Quality in Logistic and Normal Models", Naval Research Logistics, Vol. 42, pp. 1081-1097
DOI
ScienceOn
|
3 |
Boys, R.J. and Dunsmore, I.R. (1987), "Diagonostic and Sampling Models in Screening", Biometrika Vol. 74, pp. 356-374
|
4 |
Govindaluri, M.S., Shin, S., and Cho, B.R. (2004), "Tolerance Optimization Using the Lambert W Function: an Empirical Approach", International Journal of Production Research Vol. 42, pp. 3235-3251
DOI
ScienceOn
|
5 |
Golhar, D.Y. (1987), "Determination of the Best Mean Contents for a Canning Problem", Journal of Quality Technology Vol. 19, pp. 82-84
DOI
|
6 |
Hong, S.H. and Cho, B.R. (2007), "Joint Optimization of Process Target Mean and Tolerance Limits with Measurement Errors under Multi-Decision Alternatives", European Journal of Operational Research, Vol. 183, pp. 327-335
DOI
ScienceOn
|
7 |
Hong, S.H., Kwon, H.M., Lee, M.K., and Cho, B.R. (2006), "Joint Optimization in Process Target and Tolerance Limit for L-Type Quality Characteristics", International Journal of Production Research Vol. 44, pp. 3051-3060
DOI
ScienceOn
|
8 |
Schmidt, R.L. and Pfeifer, P.E. (1991), "Economic Selection of the Mean and Upper Limit for a Canning Problem with Limited Capacity", Journal of Quality Technology Vol. 23, pp. 312-317
DOI
|
9 |
Misiorek, V.I. and Barnett, N.S. (2000), "Mean Selection for Filling Processes under Weights and Measures Requirements", Journal of Quality Technology Vol. 32, pp. 111-121
DOI
|
10 |
Li, L. and Owen, D.B. (1979), "Two-Sided Screening Procedures in the Bivariate Case", Technometrics Vol. 21, pp. 79-85
DOI
|
11 |
Moskowitz, H., Plante, R. and Duffy, J. (2001), "Multivariate Tolerance Design Using Quality Loss", IIE Transactions Vol. 33, pp. 437-448
|
12 |
Lee, M.K. and Kim, G.S. (1994), "Determination of the Optimal Target Values for a Filling Process When Inspection Is Based on a Correlated Variable", International Journal of Production Economics Vol. 37, pp. 205-213
DOI
ScienceOn
|
13 |
Plante, R. (2002), "Multivariate Tolerance Design for a Quadratic Design Parameter Model", IIE Transactions Vol. 734, pp. 565-571
|
14 |
Kwon, H.M., Hong, S.H. and Lee, M.K. (2007), "Economic Selection of Mean Value for a Multiple-Product-Manufacturing-Process with Two-Sided Specification Limits", International Journal of Industrial Engineering, Vol. 14 pp. 348-354
|
15 |
Choi. I.J. and Hong, S.H. (2008), "Effects of Limited Capacity on Tolerance Design for Products with N-Type Quality Characteristics", Journal of the Korean Society for Quality Management Vol. 36, pp. 20-27
과학기술학회마을
|
16 |
Lee, M.K. and Elsayed, E.A. (2002), "Process Mean and Screening Limits for Filling Processes under Two-Stage Screening Procedure", European Journal of Operational Research Vol. 138, pp. 118-126
DOI
ScienceOn
|
17 |
Lee, M.K., Kwon, H.M., Hong, S.H., and Ha, J.W. (2006), "Economic Selection of Sub- Process Mean Values for a Mixture Production Process", International Journal of Production Research Vol. 44, pp. 4367-4376
DOI
ScienceOn
|
18 |
Riew, M.C. (1989), "Economic Selection of Specification Limits for a Given Target Value", Journal of the Korean Institute of Industrial Engineers Vol. 15, pp. 57-64
|
19 |
Lee, M.K., Hong, S.H., and Elsayed, E.A. (2001), "The Optimum Target Value under Single and Two-Stage Screenings", Journal of Quality Technology Vol. 33, No. 4, pp. 506-514
DOI
|
20 |
Tang, K. (1987), "Economic Design of a One- Sided Screening Procedure Using a Correlated Variable", Technometrics Vol. 29, pp. 477-485
DOI
|
21 |
Hong, S.H. and Elsayed, E.A. (1999), "The Optimum Mean for Processes with Normally Distributed Measurement Error", Journal of Quality Technology Vol. 31, pp. 338-344
DOI
|
22 |
Duffuaa, S.O. and Al-Najjar, H.J. (1995), "An Optimal Complete Inspection Plan for Critical Multicharacteristic Components", Journal of Operational Research Society Vol. 46, pp. 930-942
DOI
|
23 |
Hong, S.H. and Elsayed, E.A. (1998), "Economic Complete Inspection Plans with Multi-Decision Alternatives", International Journal of Production Research Vol. 36, pp. 3367-3378
DOI
ScienceOn
|
24 |
Tang, K. (1988), "Economic Design of Product Specifications for a Complete Inspection Plan", International Journal of Production Research Vol. 26, pp. 203-217
DOI
ScienceOn
|
25 |
Maghsoodloo, S. and Li, M.H.C. (2000), "Optimal Asymmetric Tolerance Design", IIE Transactions Vol. 32, pp. 1127-1137
|
26 |
Bai, D.S. and Hong, S.H. (1992), "Economic Screening Procedures Using a Correlated Variable with Multidecision Alternatives", Naval Research Logistics, Vol. 39, pp. 471-485
DOI
|