• Journal of dental hygiene science
• /
• v.16 no.2
• /
• pp.111-117
• /
• 2016

The purpose of this study was to assess the relationship that adolescent stress perception level has with dietary habits and oral health behaviors in high school students. A survey of high school students in some areas of the Jeollabuk-do province of South Korea was conducted. Five hundred fourteen survey responses were used in the final analysis. As a result of the questionnaire survey, the following conclusions were obtained. The highest stress type was indicated to be academic stress (mean${\pm}$standard deviation [SD], $3.09{\pm}0.89$). The next was shown to be home (family) stress (mean${\pm}$SD, $2.85{\pm}0.84$). The possibility of using a dental clinic was indicated to be less in girls than boys (p<0.001). Regarding subjective oral health behavior, the possibility of visiting a dental clinic was low in those who thought that their own oral health condition was not good or moderate (p<0.05). Also, it was shown that the higher stress led to the higher possibility of visiting a dental clinic (p<0.01). Students with higher grades had a in the upper ranks were indicated to have high possibility of having a regular meal (p<0.01). Higher stress led to the significantly higher possibility of eating cariogenic food (p<0.01). Students with median grades had a high possibility of eating cariogenic food (p<0.01), while students with higher grades had a low possibility of eating cariogenic food (p<0.05). These resultss show that stress perception level influences dietary habits and oral health behaviors. Thus, there is a need to develop a program in high scholls to promote the physical and mental health of students to relieve stress. Substantial and systematic oral health education is thought to be likely needed to develop desirable dietary habits.

• Journal of dental hygiene science
• /
• v.15 no.6
• /
• pp.703-711
• /
• 2015

The high dental treatment cost has been considered as one of the major reasons for inappropriate dental treatment in Korea. The aim of this study was to investigate the opinions of expansion of National Health Insurance (NHI) in dental treatment fields not covered with NHI and buying private dental insurance. This survey was carried out targeting 266 adults from their 30s to 50s with convenience sampling. The higher orders in stress of dental treatment cost were orthodontic treatment, dental implant, prosthodontic treatment, and caries treatment not covered with NHI. The higher orders in needs of expansion of NHI were caries treatment not covered with NHI, prosthodontic treatment, and orthodontic treatment. The agreement percentages with age restriction in NHI were scaling 57.1%, denture 23.3%, implant 14.3%, respectively. The subjective oral health had impact on the stress of dental treamtent cost and expansion on NHI. Although only 8.3% subjects had private dental insurance, 68.4% of the subjects had positive opinions buying private dental insurance. The correlation coefficients between stress of dental treatment cost and buying private dental insurance were implant 0.408, caries treatment not covered with NHI 0.404, denture 0.394, crown and bridge 0.375, and orthodontic treatment 0.313. Expansion of NHI in dental treatment and development of private dental insurance was suggested to treat dental disease in appropriate time.

• Korean Journal of Poultry Science
• /
• v.40 no.3
• /
• pp.235-241
• /
• 2013

This work was carried to evaluate effect of different raising periods on fatty acids and amino acids properties of Korean native commercial ducks. Korean native ducks (n = 90) from National Institute of Animal Science (RDA, Korea) were divided into 6 groups (15 birds/group) and were fed with meat-type duck diets for 8 wk old. When ducks grew at specific wk (6, 7 and 8 weeks), 2 ducks per group were slaughtered at 6, 7 and 8 wk old. Myristic acid (C14:0) and palmitic acid (C16:0) of saturated fatty acid (SFA) were the highest and arachidonic acid of unsaturated fatty acid (USFA) was the lowest at the age of 6 weeks old (P<0.05) at the age of 6 weeks old among treatments. Stearic acid of SFA was the highest at the age of 7 weeks old among treatments. There was no significant difference on other fatty acids among treatments. SFA and USFA have significant difference at the age of 8 weeks (P<0.05). Histidine, leucine, lysine, methionine, phenylalanine and threonine of essential amino acid increased with passing weeks (P<0.05). There was no significant difference on isoleucine and valine (P>0.05). Every non-essential amino acids were the highest at the age of 8 weeks among treatments (P<0.05). In conclusion, fatty acid contents and amino acid contents increased until the age of 8 weeks old, but further research was needed because of deficiency of data to suggest the correct shipping time.

• Korean Journal of Poultry Science
• /
• v.47 no.3
• /
• pp.169-180
• /
• 2020

This study examined the effects of a probiotic complex (PC) containing Lactobacillus plantarum, Bacillus subtilis, and Saccharomyces cerevisiae on growth performance, organ weight, immune parameters, fecal microbial count, and noxious odor in broiler chicks. A total of 216 birds (4-day-old) were fed a basal diet (CON) and a diet supplemented with 0.25% (PC1) and 0.5% (PC2) of PC until 35 days of age. No difference in body weight, feed intake, and FCR was observed among the groups. The intestinal mucosal weight of the PC1 group was greater than that of the CON group without affecting weights of the other organs. Intestinal secretory immunoglobulin A (sIgA) levels in the PC2 group increased significantly (P<0.05) compared with that in the CON group. The PC2 group also had a strong tendency for elevated blood sIgA levels. Dietary PC did not affect the level of interleukin-1β in the blood and mucosal tissues or alter maltase, sucrase, and leucine aminopeptidase activities in the intestinal mucosa. The PC2 group had higher colony-forming units (cfu) for L. plantarum and S. cerevisiae, but lower cfu for E. coli than those in the CON group. Compared to the CON diet, the PC2 diet resulted in a decreased H₂S concentration and a tendency toward decreased CH₃SH concentration. In conclusion, a 0.5% PC diet showed increased sIgA and desirable microbial population, and decreased noxious odor in the feces, suggesting that PC could be applied as an environmentally friendly feed additive in broiler chicks.

• The Korean Journal of Mycology
• /
• v.24 no.1 s.76
• /
• pp.38-48
• /
• 1996

The survival or colonization of beneficial organsisms and suppression of root rot of ginseng (Panax ginseng) by two distinct bacteria, Pseudomonas cepacia, Bacillus cereus and three mycorrhiza in pot soil were investigated and compared with uninoculated root. In separate inoculation, colonization of roots by P. cepacia was maintained at 6.25 (log cfu/g root) during growth for 10 days under pot culture conditions comparing to $5.62{\sim}6.19$ by mixed treatment with other organisms. Colonizations of P. cepacia were gradually decreased from 6.25 (log cfu/g root) in 10 days growth to 3.01 (log cfu/g root) in 270 days incubation period. This reduction was also investgated in combination treatments by B. cereus or F. solani. The numbers of Fusarium spp. were colonized high number in rhizosphere soil from 3.33 to 3.67 (log cfu/g root) in control within $10{\sim}60$days after treatment of pathogen F. solani, but it's numbers were markedly decreased in 270 days cultivation of plant from 3.33 to 1.02 (log cfu/g root) after treatment. In treatment of beneficial strains of P. cepacia and B. cereus, P. cepacia significantly suppressed the development of root rot from 4.3 in control to 1.2 in treatment, whereas B. cereus alone had no effect on the rate of disease suppression. The disease index $(1.8{\sim}2.3)$ in combination of two bacteria was reduced in plants inoculated with both P. cepacia and B. cereus comparing to the index (4.3) of control. As an effect of inoculation with mycorrhiza on disease suppression, suppression of root rot by F. solani was reduced to $1.2{\sim}1.6$ in disease index in treatment of Glomus albidum and Acaulospora longular comparing to 4.3 of control. In the treatment of bacterial strain P. cepacia and mycorrhizal fungus Glomus albidum, the disease suppression was apparent to 1.2 and 1.2 comparing to 4.3 of control in disease index respectively.

• The Korean Journal of Mycology
• /
• v.3 no.1
• /
• pp.1-19
• /
• 1975

Since the importance of casing in fruit body formation of Agaricus bisporus has been emphasized, physico-chemical characteristics of casing materials were discussed by many workers and a mixture of peat and mineral soil as proper casing material has been adopted in many of mushroom growing countries. Because of limited resources of peat in Korea, it is necessary to find practical performance and substitutional materials for casing. The effect of casing on mycelial growth and mushroom yield of A. bisporus varied with materials, its combination and practices etc. The experiments to be discussed in this paper are concerned with pH and Ca of casing material which influence A bisporus, and changes of physico-chemical characteristics with mixing ratio of casing materials and its effect on A. bisporus. The optimum range of moisture content of each material, management of watering and application of physico-chemical characteristics casing materials was also investigated and re-use of weathered spent compost for casing material was described. 1. The effect of calcium on mycelial growth of A. bisporus at various pH in Halbschalentest showed different results with calcium sources. Best results were obtained around neutrality and fresh weight of fruit bodies grown in the range of pH 7 to 8 was highest among the tested levels. 2. Available moisture, pore space, organic matter, cation exchangeable capacity and exchangeable cation was increased by an increase of mixing ratio of peat in casing materials, while an adverse effect was obtained by addition of sand. 3. Mycelial growth on clay loam was more rapid at a lower bulk density of 0.75g/cc and at 20% moisture content on a dry weight basis at the same bulk density. 4. Mixing ratio of casing materials, 60 to 80 per cent by volume of peat mixed with 20 to 40 per cent of clay loam produced the highest yield of fresh fruit bodies and sand the lowest. However, per cent of open cap was highest in peat and lowest in sand. 5. Days required for fruit body initiation was shortened in mixtures of peat and clay loam by one to three days compared with other materials and the formation of flushes was clear. 6. The effect of some physico-chemical characteristics of casing materials on the fresh weight of fruit bodies were estimated by a multiple regression equation; Y=-923.86+$8.18X_1+8.04X_2+7.90X_3+0.12X_4+2.03X_5-0.82X_6-0.54X_7$ where $X_1,X_2,X_3,X_4,X_5,X_6,X_7$ are sand, silt, clay, available moistuer, porosity, organic matter and exchangeable cation respectively. The productivity of certain casing material could be predicted from this equation. 7. Fresh weight of fruit bodies was positively correlated with porosity exchangeable cation, organic matter, available moisture, silt and clay of materials; while sand was negatively correlated. On the contrary, sand was the unique factor reducing per cent of open cap. 8. Distribution of three phases of high productive casing material was concentrated in the range of 10 to 30 per cent solids, 15 to 30 per cent liquids, and 50 to 60 per cent in air volume. 9. Fresh weight of fruit bodies from peat was not affected with heavy watering but in clay loam and sandy loam severe crop losses occurred. Fresh weight of individual fruit was increased and open caps were decreased with heavy watering but light watering resulted in adverse effects: its effect was especially great in peat. 10. Optimum range of moisture content by weight on a dry basis was different with each casing material. To maintain optimum moisture content concerned with yield of fruit bodies and open cap, sandy loam and peat mixtures required daily watering of 0.6, 0.6 to 1. 2 and 1.2 to 2.4 liters per $3.3m^2$ of bed area, respectively. 11. Maximum yield of fruit body was recorded in the range of pF 2. 0 to 2. 5 of casing materials if organic matter content was below 4.2 per cent and in pF 1. 3 to 1.8 if above 7.1%. 12. pF curve of a certain casing material could be draws from moisture content at various pF values by multiple regression equations provided texture, organic matter and calcium of the casing material are given. Optimum moisture range of the casing materials also could be estimated by the equation. 13. It was possible to improve the phyico-chemical characteristics of clay loam and sandy loam by addition of weathered spent compost although the effect was less than in the case of peat. Fresh weight of fruit bodies wsa increased by addition of weathered spent compost but its effect was not as remarkable as peat. Accordingly, further studies will be required.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.5
• /
• pp.431-438
• /
• 2000

To clarify the annual reproductive cycle in a rockfish, Sebastes schlegeli, monthly changes in gonadosomatic index (GSI), hepatosomatic index (HSI) and histological feature of gonads and plasma levels of sex steroid hormones ($estradiol-l7{\beta},\;17{\alpha},\;20{\beta}-dihydroxy-4-pregnen-3-one,\;testosterone\;and\;11-ketotestosterone$) were investigated. The annual reproductive cycle in females could be divided into 5 periods as follows: 1) recovery period (June to September): serum level of $estradiol-l7{\beta}$ increased gradually; 2) vitellogenesis period (Septemer to february) : vitellogenic oocytes were obsewed, GSI sustained high value, and serum level of $estradiol-l7{\beta}$ increased; 3) gestation period (February-April): developing larva showed in the ovary, and serum levels of $17{\alpha},\;20{\beta}-dihydroxy-4-pregnen-3-one$ and testosterone increased; 4) partrition period (April to May) : larva were delivered, and value of GSI and serum levels of hormones decreased rapidly; 5) resting period (May to June) : value of GSI and serum levels of $estradiol-l7{\beta}$ and testosterone remained low. The annual reproductive cycle in males could be divided into 6 periods; 1) early maturation period (April to June): value of GSI and serum levels of hormones incresed gradually, cyst of spermatogonia incresed in number, and a small number of cyst of spermatocyte was observed; 2) mid-maturation perid (June to September); value of GSI and serum levels of hormones increased, and germ cells in many cysts were undergoing active sperrnatogenesis; 3) late maturation period (September to November) : value of GSI and serum levels of hormones remained high and spermatozoa were released into the lumina of the seminal lobules; 3) spermatozoa dischaging period (Nobember to December) : the lumina of the seminal lobules were enlarged and filled with mature spermatozoa; 4) degeneration period (December to Februauy)i value of GSI decresed and cyst of spermatocyte were decresed in number; 5) resting period (December to April) : no histological changes of testes were observed, and value of GSI and serum levels of hormones remained low. In November, the lumina of the seminal lobules were filled with mature spermatozoa and sperm masses were present in the ovarian cavity. Thus, copulation in this species occurred in November and December.

• Korean Journal of Optics and Photonics
• /
• v.16 no.3
• /
• pp.182-190
• /
• 2005

The fiber Raman amplifier(FRA) is a distinctly advantageous technology. Due to its wider, flexible gain bandwidth, and intrinsically lower noise characteristics, FRA has become an indispensable technology of today. Various FRA modeling methods, with different levels of convergence speed and accuracy, have been proposed in order to gain valuable insights for the FRA dynamics and optimum design before real implementation. Still, all these approaches share the common platform of coupled ordinary differential equations(ODE) for the Raman equation set that must be solved along the long length of fiber propagation axis. The ODE platform has classically set the bar for achievable convergence speed, resulting exhaustive calculation efforts. In this work, we propose an alternative, highly efficient framework for FRA analysis. In treating the Raman gain as the perturbation factor in an adiabatic process, we achieved implementation of the algorithm by deriving a recursive relation for the integrals of power inside fiber with the effective length and by constructing a matrix formalism for the solution of the given FRA problem. Finally, by adiabatically turning on the Raman process in the fiber as increasing the order of iterations, the FRA solution can be obtained along the iteration axis for the whole length of fiber rather than along the fiber propagation axis, enabling faster convergence speed, at the equivalent accuracy achievable with the methods based on coupled ODEs. Performance comparison in all co-, counter-, bi-directionally pumped multi-channel FRA shows more than 102 times faster with the convergence speed of the Average power method at the same level of accuracy(relative deviation < 0.03dB).

• Korean Journal of Optics and Photonics
• /
• v.27 no.1
• /
• pp.18-24
• /
• 2016

To effectively utilize a flash and predict its effects on an infrared device, it is essential to know the infrared characteristics of the flash source. In this paper, a study of the IR characteristics of flash light sources is carried out. The IR characteristics of three flash sources, of which two are combustive and the other is explosive, are measured with an IR characteristic measurement system over the middle- and long-wavelength infrared ranges. From the measurements, the radiances over the two IR ranges and the radiative temperatures of the flashes are extracted. The IR radiance of flash A is found to be the strongest among the three, followed by those of sources C and B. It is also shown that the IR radiance of flash A is about 10 times stronger than that of flash B, even though these two sources are the same type of flash with the same powder. This means that the IR radiance intensity of a combustive flash source depends only on the amount of powder, not on the characteristics of the powder. From the measured radiance over MWIR and LWIR ranges for each flashes, the radiative temperatures of the flashes are extracted by fitting the measured data to blackbody radiance. The best-fit radiative temperatures (equivalent to black-body temperatures) of the three flash sources A, B, and C are 3300, 1120, and 1640 K respectively. From the radiance measurements and radiative temperatures of the three flash sources, it is shown that a combustive source radiates more IR energy than an explosive one; this mean, in turn, that the effects of a combustive flash on an IR device are more profound than those of an explosive flash source. The measured IR radiances and radiative temperatures of the flash sources in this study can be used to estimate the effects of flashes on various IR devices, and play a critical role for the modeling and simulation of the effects of a flash source on various IR devices.

• Korean Journal of Optics and Photonics
• /
• v.27 no.1
• /
• pp.1-17
• /
• 2016

Over the past two decades, fiber-based lasers have made remarkable progress, now having reached power levels exceeding kilowatts and drawing a huge amount of attention from academy and industry as a replacement technology for bulk lasers. In this paper we review the significant factors that have led to the progress of fiber lasers, such as gain-fiber regimes based on ytterbium-doped silica, optical pumping schemes through the combination of laser diodes and double-clad fiber geometries, and tandem schemes for minimizing quantum defects. Furthermore, we discuss various power-limitation issues that are expected to incur with respect to the ultimate power scaling of fiber lasers, such as efficiency degradation, thermal hazard, and system-instability growth in fiber lasers, and various relevant methods to alleviate the aforementioned issues. This discussion includes fiber nonlinear effects, fiber damage, and modal-instability issues, which become more significant as the power level is scaled up. In addition, we also review beam-combining techniques, which are currently receiving a lot of attention as an alternative solution to the power-scaling limitation of high-power fiber lasers. In particular, we focus more on the discussion of the schematics of a spectral beam-combining system and their individual requirements. Finally, we discuss prospects for the future development of fiber laser technologies, for them to leap forward from where they are now, and to continue to advance in terms of their power scalability.