• Journal of the Korea Safety Management & Science
• /
• v.24 no.2
• /
• pp.127-134
• /
• 2022

Production management in the automobile parts industry is carried out according to the production plan of the customer, so it is important to prevent shortages in product supply. As the product composition became increasingly complex, the MES System was built for the purpose of efficient production plan management and inventory management, but its utilization is low. This study analyzed the problems of the MES system and sought to improve it. Through previous studies, it was confirmed that the inventory management of the pull approach that actually occurred in the warehouse is more suitable than the push approach based on the forecast of the warehouse for the volatility, complexity, and uncertainty of orders in the auto parts industry. To realize this, we tried distributed MRP by using the ADO function of VBA to link the standard information of the MES system with Excel and change the structure of the BOM table. Through this, it can help increase the accuracy of production planning and realize efficient inventory management, thereby increasing the utilization of the MES system in the auto parts industry and enhancing the competitiveness of the company.

• Journal of the Korean Geographical Society
• /
• v.51 no.2
• /
• pp.235-253
• /
• 2016

China has been developing a new auto industry growth plan since 2004. In line with this initiative, China actively adopted its policy favoring foreign companies' investment which had a competitive edge over their technologies and manufacturing methodologies. To meet this demand in policy and market change, many foreign auto companies and their parts' manufacturers including Korean auto companies joined this stream. Policy change favoring higher technologies applicable in China requested auto companies' swift adaptation to meet the policy requirements by higher technologies with innovation and introduction of those foreign technologies to China. The spatial (excellence) strategy was followed by the increase in its efficiency and competiveness of each region, which were materialized by or in the form of; Firstly, strategic partnership with China auto companies and encouragement of Korea auto parts manufacturing companies to set up its own factories in China. Secondly, modularization and platform sharing strategy by applying enhanced technologies. Thirdly, strategic utilization of China local government's incentive policies. As production management methodology, JIS was adopted all across the board to meet the on-demand market requirements in the manufacturing processes. Auto part manufacturers had been integrated regionally based on forward linkages and modules. As a result, regional-specific auto industry complexes have been made in the places such as Beijing-Hyundai in the north, Dongfeng-Yueda-Kia in the south, common auto parts at central area like Qingdao, and other parts and raw materials in the vicinity of Shanghai.

• Journal of the Economic Geographical Society of Korea
• /
• v.19 no.3
• /
• pp.457-473
• /
• 2016

This research investigates that role of space-based social capital presented in Dapsimni auto-parts shopping area considering Korean auto-parts industry and the regional characteristics of retailing industrial cluster. For this, it went through the process with in-depth interview and surveys of the owner of Dapsimni, social capital of retailing industrial cluster studied using Lin(1999)'s social capital model by separating formation, accessibility and mobilization of it. The result is that auto-part sellers in Dapsimni make themselves space-based social capital, which provides the profit from certain area: strengthening auto-parts of transaction cost and information exchange among them, creating new market for selling auto-parts. This meant that main factor sustaining the characteristic of retailing industrial cluster despite gradually decline of its role.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.5 no.3
• /
• pp.135-140
• /
• 2009

In this paper, a robot control system with stereoscopic Image was presented. The robot control system has an auto-focusing functionality which measures the distance between robot and object using an infrared sensor. By providing depth and information based on the stereoscopic image, it allows user to have presence and immersion as if he(she) be there. the proposed robot control system's propriety was examined through the comparison experiment with the mono-scopic image.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.13 no.4
• /
• pp.25-31
• /
• 2017

In this paper, we propose a study on DB-based automatic crop cultivation that obtains crop cultivation data using IOT and automatically controls the cultivation environment using it. A system for DB-based automatic crop cultivation that automatically controls the cultivation environment is composed of a management server and a local controller. The management server was implemented using the MySQL DB in the Linux server system, and the local controller was designed and manufactured using the WiFi module and ARM Coretax-3 series MCU and confirmed its operation in the laboratory. The purpose of this study is to provide the optimal cultivation data and to grasp the cultivation status in real time when the knowledge of professional cultivation is needed like the farmers of ear farm villages. Research should continue to enable the cultivation of crops to reflect the requirements of each user.

• The Journal of Bigdata
• /
• v.7 no.1
• /
• pp.125-137
• /
• 2022

The transportation industry is one of the important industries due to the geographical requirements surrounded by the sea on three sides of Korea and the problem of resource poverty, which relies on imports for most of its resource consumption. Among them, the proportion of the shipping industry is large enough to account for most of the transportation industry, and maintenance in the shipping industry is also important in improving the operational efficiency and reducing costs of ships. However, currently, inspections are conducted every certain period of time for maintenance of ships, resulting in time and cost, and the cause is not properly identified. Therefore, in this study, the proposed methodology, LSTM-AutoEncoder, is used to detect abnormalities that may cause ship failure by considering the time of actual ship operation data. In addition, clustering is performed through clustering, and the potential causes of ship main engine failure are identified by grouping outlier by factor. This enables faster monitoring of various information on the ship and identifies the degree of abnormality. In addition, the current ship's fault monitoring system will be equipped with a concrete alarm point setting and a fault diagnosis system, and it will be able to help find the maintenance time.

• Korea Trade Review
• /
• v.43 no.3
• /
• pp.47-74
• /
• 2018

The United States is often perceived as a free-trading nation as it significantly contributed to the establishment of the GATT and WTO in the 20th century. With the inauguration of the Trump Administration in 2017, however, trading partners of the United States are faced with great concerns over the 'new' aggressive, protectionist and above all, unilateral trade threats posed by the United States under the name of 'America-First' trade policy. However, the recent unilateral trade actions by the United States are not new, but has historically and continuously been used to protect its key industries, like the automobile sector. This paper analyzes the historical cases of the unilateral trade policy of the United States in the automobile industry, targeting Korea and Japan in the 1980s, 1990s and 2010s. Then, we draw future implications for other key industries of the United States such as IT, intellectual property, services and agricultural sectors. This study evaluates whether such unilateral practices have brought successful and expected outcomes in favor of the United States.

• Journal of Korean Society for Quality Management
• /
• v.39 no.1
• /
• pp.131-140
• /
• 2011

Today, due to the global recession car sales have been decreased rapidly and auto makers are competing continuously to expand their market share. Automakers are struggling in order to secure competitive cost and quality through continuous cost reduction and quality innovation activities to win in the competition. In this situation, auto parts makers are trying to reinforce price competitiveness by reducing COPQ (Cost Of Poor Quality) in the mass production stages by securing the quality of components in advance from the design stage through DFSS (Design For Six Sigma) activities which is 6 sigma approach in the R&D field. However, auto parts makers have been undergone various confusion, feeling difficulties to get interrelationship among various activities. Thus, this study is going to suggest approach method for much more effective R&D activities by securing interrelationship between ISO/TS 16949 system established in the auto parts industry and DFSS activities.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.5
• /
• pp.55-63
• /
• 2018

In this paper, we designed a system that integrate and organize customer management programs and databases, which are performed independently of each other. And we designed the system so that it can be used for future marketing by implementing the system to share and efficiently utilize mutual independent maintenance information. From the CRM perspective, a comprehensive information system ghat manages every information on both new cars and second hand cares grom their purchase, to parts, to insurance, and to scraping needs to be established. The following should be applied in the establishment of the IAMS. Auto makers or auto maintenance services providers exclusive management of information on customers and their car maintenance services is aggravating the customer's inconvenience and complaints. In addition, the service provider has difficulty providing consistent maintenance services because it has little information about previous auto maintenance services the customer received. Besides, the customers who have no information on costs of parts and labor tend to hesitate to trust the costs of maintenance services. This study to provide customers with systematic maintenance service and causing them some inconvenience. Therefore, in order to maintain existing customers, auto maintenance service providers should provide services the customers wanted on the basis of accurate information about them.

• Journal of the Semiconductor & Display Technology
• /
• v.13 no.1
• /
• pp.51-55
• /
• 2014

In this paper, an hybrid automatic focusing method has been proposed for speedy and reliable measurement and inspection in industry. It can improve reliability of focusing position by using not a focusing measure but the hybrid one that is incorporated with sobel operator and auto-correlation. Also, it can not only reduce control time of focusing position using adaptive step size, but also improve accuracy of focusing position by gaussian interpolation. Its performance is verified by experiments. It is expected that it can apply to optical system for measurement and inspection in industry fields.