• Journal of Ocean Engineering and Technology
• /
• v.32 no.6
• /
• pp.419-426
• /
• 2018

Recently, in an effort to reduce the energy efficiency design index (EEDI), studies on energy saving devices (ESDs) have been conducted. In this study, we designed a post-device suitable for a KRISO container ship (KCS) using computational fluid dynamics (CFD). In order to increase the efficiency of the post-device, a twisted rudder was used, which has a proven performance (showing a 1.34% reduction in DHP compared to the bare hull at 24 knots) in previous research at Pusan National University. In addition, an increase in efficiency was expected by the use of a rudder bulb, including the discontinuous section of the twisted rudder and a divergent propeller cap to prevent the contraction of the wake. The optimization criterion was the case where the delivery power was the least compared with the bare hull. We analyzed the cause of the efficiency increase through an analysis of the self-propulsion factor. The case study for optimization was divided into 4 types (1. clearance of the bulb and cap, 2. shape of the bulb, 3. size of the bulb and cap, and 4. asymmetric bulb). Finally, with a clearance of 50 mm from the ship, a spherical bulb with the cap having an angle of $5^{\circ}$, and an asymmetric rudder bulb with a bulb diameter of 1.2HH/1.4H (horizontal/vertical) showed a 2.05% reduction in DHP compared to the bare hull at 24 knots. We will fabricate a post-device that will be optimized in the future and verify the performance of the post-device through model tests.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.7
• /
• pp.965-971
• /
• 2017

The primary objective of this study was to assess the energy efficiency performance of an optimized hull form capable of saving energy based on existing vessels. The bow shape of existing vessels was investigated, giving consideration to design draft and speed. Resistance performances were also assessed for existing vessels according to operating conditions. Commercial CFD codes and model test materials were used to assess effective power. An optimized hull form with minimum resistance was selected given real operating conditions. The effective horsepower of existing and optimized vessels was estimated at three speeds. Resistance performance for an optimized vessel showed a 6 % improvement in effective horsepower at design speed (12 knots) compared to existing vessels. Quasi-propulsive efficiency employed experimental data, while energy efficiency performance was analyzed based on operating days, bunker fuel oil C cost, daily fuel oil consumption and specific fuel oil consumption. Energy efficiency performance for an optimized vessel showed a gain of 30 million won per year in reduced costs at design speed (12 knots) compared to existing vessels.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.2
• /
• pp.16-23
• /
• 2003

The study was performed to obtain basic data for high quality timber production and efficient utilization of woods by investigating the effects of thinning on timber quality of domestic Korean pine(Pinus koraiensis Sieb. et Zucc.) planted. The results of this study were summarized as follows ; Comparing the appearance of knot per one meter on log surface, the heavy thinned trees contained less knots than non-thinned ones. And the ratio of dead knots was decreased in heavy thinned trees compared with the non-thinned ones, but the knot size was increased. The inclination angle of dead knot is larger than that of live knot. The crooked logs in heavy thinning plot appeared less than those in non-thinning plot. In heavy thinning plot, the log circle percentage of cross section and the ratio of clear lumber were increased, compared with in non-thinning one. The grade of log was the highest in heavy thinning plot.

• Communications for Statistical Applications and Methods
• /
• v.30 no.1
• /
• pp.95-107
• /
• 2023

Purpose: The statistical analysis of point processes on linear networks is a recent area of research that studies processes of events happening randomly in space (or space-time) but with locations limited to reside on a linear network. For example, traffic accidents happen at random places that are limited to lying on a network of streets. This paper applies techniques developed for point processes on linear networks and the tools available in the R-package spatstat to estimate the intensity of traffic accidents in Leon County, Florida. Methods: The intensity of accidents on the linear network of streets is estimated using log-linear Poisson models which incorporate cubic basis spline (B-spline) terms which are functions of the x and y coordinates. The splines used equally-spaced knots. Ten different models are fit to the data using a variety of covariates. The models are compared with each other using an analysis of deviance for nested models. Results: We found all covariates contributed significantly to the model. AIC and BIC were used to select 9 as the number of knots. Additionally, covariates have different effects such as increasing the speed limit would decrease traffic accident intensity by 0.9794 but increasing the number of lanes would result in an increase in the intensity of traffic accidents by 1.086. Conclusion: Our analysis shows that if other conditions are held fixed, the number of accidents actually decreases on roads with higher speed limits. The software we currently use allows our models to contain only spatial covariates and does not permit the use of temporal or space-time covariates. We would like to extend our models to include such covariates which would allow us to include weather conditions or the presence of special events (football games or concerts) as covariates.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.5
• /
• pp.572-580
• /
• 2019

In view of the numerous discussions on global environmental issues, policies have been implemented to limit emissions in the field of marine transport, which accounts for a major part of international trade. In this study, a ship's emissions were calculated by applying the engine load factor to determine the total quantity of emissions based on the ship's speed reduction. For ships entering and leaving the Busan North Port from 1 January to 31 December 2017, emissions were calculated and analyzed based on the ship's type and its speed in the reduced speed zone (RSZ), which was set to 20 nautical miles. The comparison of the total amount of emissions under all situations, such as cruising, maneuvering, and hotelling modes revealed that the vessels that generated the most emissions were container ships at 76.1 %, general cargo ships at 7.2 %, and passenger ships at 6.8 %. In the cruising and maneuvering modes, general cargo ships discharged a lesser amount of emission in comparison with passenger ships; however, in the hotelling mode, the general cargo ships discharged a larger amount of emission than passenger ships. The total emissions of nitrogen oxides (NOx), sulphur oxides (SOx), particulate matter (PM), and volatile organic compounds (VOC), were 49.4 %, 45 %, 4 %, and 1.6 %, respectively. Furthermore, the amounts of emission were compared when ships navigated at their average service speed, 12, 10, and 8 knots in the RSZ, respectively. At 12 knots, the reduction in emissions was more than that of the ships navigating at their average service speed by 39 % in NOx, 40 % in VOC, 42 % in PM, and 38 % in Sox. At 10 knots, the emission reductions were 52 %, 54 %, 56 %, and 50 % in NOx, VOC, PM, and Sox, respectively. At 8 knots, the emission reductions were 62 %, 64 %, 67 %, and 59 % in NOx, VOC, PM, and Sox, respectively. As a result, the emissions were ef ectively reduced when there was a reduction in the ship's speed. Therefore, it is necessary to consider limiting the speed of ships entering and leaving the port to decrease the total quantity of emissions.

• Journal of the Korean Institute of Navigation
• /
• v.11 no.2
• /
• pp.33-52
• /
• 1987

The disasters of wet bound vessels have been more frequent than those of east bound ones on the sea routes of the North Pacific Ocean in winter season. M/V Hanjin-Inchon was also west bound in her missing voyage. The container vessel of 17, 676 gross tons, M/V Hanjin-Inchon owned by Hanjin Shipping Co.Ltd in Seoul Korea left seattle in west coast of U.S.A for Pusan , Korea on the 5th Feb., 1987 and sailed along the exact courses recommended by Ocean Routes until she reported her position and speed as 49-30N, 158-00E and 8 knots to her head office in Seoul by this ship's time 2200 hours on the 13th Feb., 1987. The above message turned out to be last message from her because she had been missing since then leaving no message but only two life boats of her name, three containers cases, large scale of oil slicks and the corpse of her 3rd mate drifting on the sea near the position reported by her last message.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.72.2-72.2
• /
• 2015

Wolf-Rayet galaxies, galaxies which show spectral features produced by Wolf-Rayet stars, are thought to be the place of recent massive star formation since the Wolf-Rayet phase covers relatively short timescale in the life of massive O and B type stars. Studying these galaxies provides a unique chance to understand how massive star formation occurs in a galaxy within a short timescale. In this work, we present the intermediate resolution optical spectra of 12 Wolf-Rayet galaxies obtained using longslit spectrograph on Bohyunsan Optical Astronomy Observatory. We derived the emission line ratios for a number of star-forming knots in each Wolf-Rayet galaxy. Star formation properties in these galaxies are discussed.

• International Journal of CAD/CAM
• /
• v.5 no.1
• /
• pp.11-18
• /
• 2005

The traditional method of manipulation of knots and degrees gives poor quality of surface, if compatibility of input curves is not good enough. In this work, a new algorithm of multiple refitting of curves has been developed using minimum energy based formulation to get compatible curves for skinning. The present technique first reduces the number of control points and gives smoother surface for given accuracy and the surface obtained is then skinned by compatible curves. This technique is very useful to reduce data size when a large number of data have to be handled. Energy based technique is suitable for approximating the missing data. The volumetric information can also be obtained from the surface data for analysis.

• Journal of the Society of Naval Architects of Korea
• /
• v.40 no.4
• /
• pp.1-7
• /
• 2003

Large Passenger Ferry has been delivered with a tendency of high speed since 1990´s. More than 50 ferries that exceed 25 knots in service speed are operating or under construction these days. Therefore, the hull form development for the large size ferry should be carefully carried out with some design points such as high service speed, severe criteria for stability, and complex design of appendages. This paper reviewed principal particulars and hull form characteristics of a high-speed large passenger ferry. It is also suggested the optimization method of hull form and appendages in point of resistance & propulsion performance. Finally, it is also introduced a high-speed large passenger ferry developed by Samsung Heavy Industries Co., Ltd., the key design points in hull form development.

• The Korean Journal of Applied Statistics
• /
• v.4 no.2
• /
• pp.171-178
• /
• 1991

For the polynomial spline regression with fixed knots, some properties of the D-optimal design are discussed. Also the D-optimal design for some cases are found analytically by using a normalized B-spline basis for $S(P_m : k : \Delta)$. Based on the Kiefer-Wolfowitz equivalence theorem, the D-optimal design for some cases are found by numerical methods.