• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.8
• /
• pp.1087-1096
• /
• 2010

This study was conducted to investigate the physiological activity of extracts of fresh mushrooms. The components were extracted by hot water; subsequently, the hot-water extract was subjected to 60% ethanol precipitation to yield high-molecular-weight (HMW) and low-molecular-weight (LMW) fractions. Total polyphenol contents, $\beta$-glucan contents, electron-donating ability (EDA), superoxide dismutase (SOD)-like activity, nitrite-scavenging activity, fibrinolytic activity, nitric oxide (NO) production, and inhibition of NO production of the mushroom extracts were measured using lipopolysaccharide (LPS)-stimulated murine macrophages, RAW 264.7 cells. The extracts of Lentinus edodes (Berk.) Singer and Pleurotus ostreatus (Fr.) Kummer contained the highest levels of $\beta$-glucan (33.5% and 25.57%, respectively). Further, the LMW fractions of the Phellinus linteus contained the highest levels of polyphenols (233.23 mg/g). The EDA of LMW fractions (10 mg/mL) of the Phellinus linteus and Agaricus bisporus were 80.74% and 51.35%, respectively. Further, SOD-like activities of the LMW fractions were high as compared to those of the HMW fractions. Nitrite-scavenging activities of the LMW fractions (pH 1.2; concentration, 10 mg/mL) of the Phellinus linteus and Pleurotus ostreatus (Fr.) Kummer were 75.95% and 41.05%, respectively. The fibrinolytic activity of the LMW fractions of all mushrooms showed no enzyme activity by fibrin plate assay. The fibrinolytic activity of the extracts of Tricholoma matsutake was the greatest inhibitory activity at 60.4%. Further study revealed that the mushroom extracts exhibited anti-inflammatory effects on RAW 264.7 cells. The LMW fraction ($500\;{\mu}g/mL$) of the Phellinus linteus considerably inhibited NO production (100%).

• Food Science and Preservation
• /
• v.15 no.3
• /
• pp.477-482
• /
• 2008

The quality characteristics of Goami by-product under the mixed enzyme treatment condition of $\alpha$-amylase and cellulase have been compared, and found the highest amount of soluble solids and reducing sugars at the $\alpha$-amylase treated group (A), and the contents revealed to show gradual decrease with the increase of cellulase content. The amounts of total dietary fiber and total sugars did not show large difference by both of enzyme concentration. The result of sugar analysis revealed the presence of all $G{\sim}G5$ in all treatment groups, and the content of malto-oligosaccharide recorded the highest content of 2,200 mg% at the $\alpha$-amylase treatment group (A). When the quality characteristic of the hydrolyzed powders manufactured by the optimum hydrolysis condition was compared, no significant color difference was found between samples. Among the contents of dietary fibers, insoluble dietary fiber was found to present in the lowest content of 6.95% at the Goami flour (GF) and the Goami by-product powder (GBPP) and Goami by-product hydrolysate powder (GBPHP) resulted the similar content around 14% and the highest soluble dietary fibers content was found in Goami by-product hydrolysate powder (GBPHP), which was followed by in the order of Goami by-product powder (GBPP) and Goami flour (GF), but the content variation was not large. The free amino acid was found to be highest in Goami by-product hydrolysate powder (GBPHP) followed by in the order of Goami by-product powder (GBPP) and Goami flour (GF). In the sugar analysis, the Goami by-product hydrolysate powder (GBPHP) was found with all $G{\sim}G5$ sugars by showing the highest amount of 1,800 mg% At the Goami by-product powder (GBPP), $G{\sim}G2$ sugars were detected with about 66 mg% and malto-oligosaccharides were not detected at the Goami flour (GF). Based upon the results, the functionality of Goami by-product hydrolysate powder (GBPHP) was found to be enforced compared to Goami flour (GF) and Goami by-product powder (GBPP), which allow us to expect it to be used as the various rice processing food source.

• Korean Journal of Food Science and Technology
• /
• v.46 no.5
• /
• pp.641-647
• /
• 2014

In this study, we evaluated the effect of Capsosiphon fulvescens extract (CFE) and its active compound, pheophorbide A (PhA), on diabetic kidney failure. Diabetes mellitus (DM) was induced by a single intraperitoneal injection of streptozotocin (STZ; 40 mg/kg body weight (BW)). After a week, the rats were orally administered CFE (4 and 20 mg/kg BW) or PhA (0.2 mg/kg BW) once a day for 9 weeks. After scarification, renal tissue samples were collected for biochemical and histochemical analyses. Our study showed that the treatment with CFE and PhA significantly decreased lipid peroxidation level and the activities of glutathione peroxidase and glutathione-S-transferase (p<0.05), but it increased glutathione level and the activities of glutathione reductase, superoxide dismutase, and catalase in the renal tissues (p<0.05). The CFE- and PhA-treated rats with DM showed improved histochemical appearance and decreased abnormal glycogen accumulation. Therefore, we suggest that PhA-containing CFE could exert renal protective effects against STZ-induced oxidative stress.

• Journal of Food Hygiene and Safety
• /
• v.33 no.2
• /
• pp.102-109
• /
• 2018

In the present study, a variety of polylactide (PLA) articles (n = 211) were tested for migration of lead (Pb), cadmium (Cd) and arsenic (As) into the food simulant (4% v/v acetic acid). Pb, Cd, and As were analyzed by inductively coupled plasma mass spectrometry (ICP-MS). Migration tests were performed at $70^{\circ}C$ and $100^{\circ}C$ for 30 min. The amounts of Pb, Cd, and As increased at $100^{\circ}C$ for 30 min compared with levels at $70^{\circ}C$. However, the migration at both conditions was very low. The maximum level of Pb at $100^{\circ}C$ for 30 min corresponded to 1% of the migration limit. The estimated daily intakes (EDI) based on safety evaluation ranged from $2.5{\times}10^{-5}$ to $2.0{\times}10^{-3}{\mu}g/kg\;bw/day$ for Pb, Cd, and As. The EDI calculated from migration of Pb at $100^{\circ}C$ for 30 min in PLA was the maximum value, $2.0{\times}10^{-3}{\mu}g/kg\;bw/day$, which corresponded to 0.055% of provisional tolerable weekly intake (PTWI, $25{\mu}g/kg\;bw/week$). The data from this study represent a valuable source for science-based safety control and management of hazardous heavy metals migrating from polylactide food contact materials.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.2
• /
• pp.72-80
• /
• 2019

Purpose: The purpose of this study is to compare and analyze the shear bond strength and fracture pattern in different enamel tooth surface treatments for resin splinting materials. Materials and Methods: G-FIX and LightFix were used as tooth splinting materials. Twenty bovine mandibular incisors were used for the preparation of the specimens. The exposed enamel surface was separated into four parts. Each tooth was treated with 37% phosphoric acid, 37% phosphoric acid + adhesive resin, 37% phosphoric acid + G-premio bond, and G-premio bond for each fraction. Shear bond strength was measured using a universal testing machine. After measuring the shear bond strength, the fractured surface of the specimen was magnified with a microscope to observe the fracture pattern. Two-way ANOVA was used to verify the interaction between the material and the surface treatment method. One-way ANOVA was used for comparison between the surface treatment methods of each material and post-hoc test was conducted with Scheffe's test. An independent t-test was conducted to compare shear bond strengths between materials in each surface treatment method. All statistics were conducted at 95% significance level. Results: G-FIX, a tooth splinting resin, showed similar shear bonding strength when additional adhesive resins were used when material was applied after only acid etching, and LightFix showed the highest shear bonding strength when additional adhesive resins were used after the acid etching. In addition, both G-FIX and LightFix showed the lowest shear bond strength when only self-etching adhesive was applied without additional acid etching. Verification of interactions observed interconnection between resins and surface treatment methods. Most of the mixed failure was observed in all counties. Conclusion: When using G-FIX and LightFix, which are tooth-splinting materials, it is considered that sufficient adhesion will be achieved even after applying only acid etching as instructed by the manufacturer.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.48 no.4
• /
• pp.343-355
• /
• 2022

Customized cosmetics are continuously mentioned as cosmetics in response to changes in the social environment and trends that emphasize individuality. Therefore, in this study, four types of nanoemulsion ampoules corresponding to skin types were prepared by different ratios of nanoemulsion formulation and ampoule formulation, and the applicability as a customized cosmetic base was checked. Particle size, polydispersity index, zeta potential, and viscosity according to time for 90 d were measured for four nanoemulsion ampoules with different volatile residues, and turbiscan was measured as a method for evaluating the stability of a colloidal dispersion system. Finally, human usability satisfaction was evaluated. As a result, it was confirmed that four kinds of nanoemulsion ampoules had a higher amount of volatile residue in the dry skin test product than in the oily skin test product. The pH was in the range of 6.41 to 6.88, and the particle size was in the range of 170 to 174 nm, and the change after 90 d was within 1.2% of the maximum, and there was no specificity in particle size stability. It was confirmed that the polydispersity index was almost constant, and showed a particle size distribution close to monodispersity by showing a change within a value smaller than 0.21 in all test products. The zeta potential was initially -63 mV or more for all four types of test products, and although it showed a slight decrease with time, there was little change to the extent of a maximum decrease of 2.5%. Viscosity was initially in the range of 4,100 to 5,100 cps and showed a decreasing trend with time, showing a maximum decrease of 37.7%. In the turbiscan measurement, the turbiscan stability index, a measure of stability, was all below 1.0, indicating dispersion stability. In the usability satisfaction evaluation (6 points) of 4 nanoemulsion ampoules corresponding to skin type, oily skin product (5.42 ± 0.67 points) > neutral oily skin product (5.36 ± 0.67 points) > neutral dry skin product (5.15 ± 0.69 point) > dry skin product (4.75 ± 0.75 points) in the order of evaluation. Four types of nanoemulsion ampoules are physically stable and have confirmed their applicability as a customized cosmetic base according to skin type, and are expected to expand in various ways.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.3
• /
• pp.231-245
• /
• 2023

In the cosmetics industry, it is important to develop new materials for functional cosmetics such as whitening, wrinkles, anti-oxidation, and anti-aging, as well as technology to increase absorption when applied to the skin. Therefore, in this study, we tried to optimize the nanoemulsion formulation by utilizing response surface methodology (RSM), an experimental design method. A nanoemulsion was prepared by a high-pressure emulsification method using Glabridin as an active ingredient, and finally, the optimized skin absorption rate of the nanoemulsion was evaluated. Nanoemulsions were prepared by varying the surfactant content, cholesterol content, oil content, polyol content, high-pressure homogenization pressure, and cycling number of high-pressure homogenization as RSM factors. Among them, surfactant content, oil content, high-pressure homogenization pressure, and cycling number of high-pressure homogenization, which are factors that have the greatest influence on particle size, were used as independent variables, and particle size and skin absorption rate of nanoemulsion were used as response variables. A total of 29 experiments were conducted at random, including 5 repetitions of the center point, and the particle size and skin absorption of the prepared nanoemulsion were measured. Based on the results, the formulation with the minimum particle size and maximum skin absorption was optimized, and the surfactant content of 5.0 wt%, oil content of 2.0 wt%, high-pressure homogenization pressure of 1,000 bar, and the cycling number of high-pressure homogenization of 4 pass were derived as the optimal conditions. As the physical properties of the nanoemulsion prepared under optimal conditions, the particle size was 111.6 ± 0.2 nm, the PDI was 0.247 ± 0.014, and the zeta potential was -56.7 ± 1.2 mV. The skin absorption rate of the nanoemulsion was compared with emulsion as a control. As a result of the nanoemulsion and general emulsion skin absorption test, the cumulative absorption of the nanoemulsion was 79.53 ± 0.23%, and the cumulative absorption of the emulsion as a control was 66.54 ± 1.45% after 24 h, which was 13% higher than the emulsion.

• Journal of Ginseng Research
• /
• v.24 no.3
• /
• pp.143-147
• /
• 2000

In previous studies we have demonstrated that several individual ginsenosides such as Rc, Rd, Re and Ri relieves formalin-induced pain following systemic treatment. But it is unknown where these single ginsenosides induce antinociception. We investigated the antinoiceptive effect of four individual ginsenosides on formalin-induced pain after intrathecal (i.t.), intracereventricular (i.c.v.), or subcutaneous (s.c.) administration using mice. We found that ginsenoside Rc, Rd, and Re except Rf attenuated both acute and tonic phase of pain. Ginsenoside Rf attenuated only tonic phase of pain after i.t. administration. The ED$\_$50/ was 1.0 (0.55∼l.75 mg/kg) for Rc, 1.15 (0.6∼2.25 mg/kg) for Rd, and 8.9 (3.9∼20.5 mg/kg) for Re in acute phase of pain. The ED$\_$50/ was 0.3 (0.1∼0.85 mg/kg) for Rc, 0.6 (0.35∼l.1 mg/kg) for Rd, 2.45 (1.25∼4.65 mg/kg) for Re, and 1.9 (1.5∼4.25 mg/kg) for Rf in tonic phase of pain. We also found that ginsenoside Rc, Rd, Re, and Rf after i.c.v. administration attenuated both acute and tonic phase of pain. The ED5o for acute phase of pain was 0.9 (0.55∼l.4mg/kg) for Rc, 0.9 (0.45∼1.7 mg/kg) for Rd, 0.93 (0.5∼l .75 mg/kg) for Re, and 1.85 (0.95∼3.5 mg/kg) for Rf. The ED$\_$50/ for tonic phase of pain was 0.7 (0.45∼1.05 mg/kg) for Rc,1.25 (0.7∼2.2 mg/kg) for Rd, 0.85 (0.45∼1.6 mg/kg) for Re, and 0.8 (0.4∼1.45 mg/kg) for Rf. Thus, the order of the analgesic potency was Rc$\geq$Rd>Re>Rf in both i.t. and i.c.v. administration routes. However, s.c. pretreatment of four ginsenosides did not reduce formalin-induced pain. These results suggest that analgesic effect of ginsenosides is achieved through spinal or supraspinal site(s) in formalin test.

• Korean Journal of Environmental Agriculture
• /
• v.25 no.1
• /
• pp.85-92
• /
• 2006

Fungicides including keroxym-methyl (strobilurin fungicide), fenarimol and trifulmizole (DMI, boscalid (anilide) and metrafenone (benzophenone) were evaluated for preventive and curative efficacies against powdery mildew on oriental melon. The fungicides were applied preventatively at 7 days, 3 days and 3 hours before inoculation. Curative applications were made by applying fungicides three times at the interval of one week when infected leaves by powdery mildew were about 16% or 30%. Then preventative and curative efficacies were evaluated one week after inoculation and final application, respectively. Boscalid and metrafenone showed preventive efficacies of 74.3 and 68.3% against powdery mildew development respectively, when treated at 7 days before inoculation. They showed 89.4 and 87.2% efficacies when treated at 3 days before iniculation and 98.5 and 93.2% at 3 hours before inoculation respectively. However, there were no preventive efficacies in kresoxym-methyl, triflumizole and femarimol (DMI fungicides) when trebled at both 7 and 3 days before inoculation. At the preventive treatment 3 hours before inoculation, they indicated 59.0, 42.5, and 37.2% efficacies, respectively. When leaves were infected about 30% by powdery mildew, curative application of boscalid and metrafenone showed 85.9 and 74.0% of efficacies, respectively. Curative efficacies of kresoxym-methyl, tiflumizole and fernarimol were 5.5, 23.0 and 46.7% respectively. When leaves were infected about 16%, curative application of boscalid and metrafenone showed 100 and 97.5% of efficacies, respectively. However, the triflumizole and fernarimol showed relatively low curative efficacies of 30.8 and 51.6%, respectively. Microscopic observation of mycelial growth and conidia formation after detection of powdery mildew disease indicated lysis of mycelium and these lysis suppression of conidia formation showed tendency in accordance with curative efficacies of fungicides.

• Clinical and Experimental Reproductive Medicine
• /
• v.28 no.2
• /
• pp.95-103
• /
• 2001

연구목적: 본 연구는 생쥐 preantral follicles의 체외 배양 조건을 확립하고 이를 기초로 높은 체외 발달률 그리고 산자 생산률을 얻고자 하였다. 연구재료 및 방법 : Preantral follicles의 oocyte-granulosa cell complexes (OGCs)는 생후 12일된 FI ($C57BL{\times}CBA$)으로부터 난소를 적출하여 효소를 이용한 방법을 통해 획득하였다. 회수된 complexes는 10일 또는 12일 동안 체외 성장을 위해 Transwell-COL membrane insert로 옮겨졌고 5% FBS, 100 mIU/ml FSH, 100 mIU/ml hMC가 첨가된 ${\alpha}MEM$에서 배양되었다. 체외 성숙을 위해 1.5 IU/ml hCG가 첨가된 ${\alpha}MEM$에서 18 hrs 배양을 실시하였다. 그 후 M16에서 수정능력이 획득된 정자와 수정을 하여 4 hrs, 7 hts, 9 hrs 후에 10% FBS가 첨가된 modified M16 배양액에서 4일간 배양하거나 또는 bovine cumulus cell과 co-culture를 실시하였다. 그리고 형태적으로 정상적인 22개의 상실배와 포배를 2마리의 위임신 대리모 (ICR)의 자궁에 이식하여 산자 생산을 유도하였다. 결과: 1) OGCs 크기가 mouse preantral follicles의 핵 및 세포질 성숙에 미치는 영향을 조사하였을 때 $120{\sim}150{\mu}m$의 preantral follicles (MII: 33.0%, 난할률: 36.7%, 상실배 이상; 20.9%)은 핵 및 세포질 성숙에 있어서 $70{\sim}110{\mu}m$ (MII: 12.2%, 난할률: 10.2%, 상실배 이상: 4.8%)보다 더 높았다(p<0.001). 2)체외 성장기간의 연장이 mouse preantral follicles의 핵 및 세포질 성숙에 미치는 영향을 조사하였을 때 10일 (난할률: 38.2%)은 12일 (난할률: 20.0%)보다 난할률에서만 더 높았다 (p<0.01). 3) 체외 수정 시간의 연장이 mouse preantral follicle의 세포질 성숙에 미치는 영향을 조사하였을 때 9 hrs (난할룰 31.5%, 상실배 이상: 14.3%)은 4 hrs (난할률: 17.5%, 상실배 이상: 4.8%), 7 hrs (난할률: 20.4%, 상실배 이상: 6.1%) 보다 세포질성숙에 있어서 유의하게 높은 발달률을 나타냈다 (p<0.01). 4) 공배양이 mouse preantral follicle의 세포질성숙에 미치는 영향을 조사하였을 때 공배양 (상실배 이상: 17.4%)을 실시했을 때와 M16 (상실배 이상17.4%)에서 배양되었을 때는 차이가 없었다. 5)preantral follicle의 크기 ($120{\sim}150{\mu}m$), 체외 성장기간 (10일), 체외 수정 기간 (9시간), 배양 환경 (단지 medium만 존재)의 적절한 결과들을 종합하여 수행하였을 때 MII 성숙률, 난할률, 상실배 이상의 발달률은 30.2%, 39.3%, 22.5%이었고 총 22개의 상실배 및 포배를 2마리의 대리모에 이식했을 때 1마리가 임신했고 1마리의 산자를 생산했다. 결론: 따라서, 본 실험은 preantral follicle을 이용한 체외 배양 시스템이 생쥐 oocyte를 공급하는 또 다른 방법으로 효과적으로 이용될 수 있다는 것을 시사한다.