• Journal of Soil and Groundwater Environment
• /
• v.10 no.1
• /
• pp.43-57
• /
• 2005

Twelve bottom sediments and three cores were collected in Juam reservoir for a study on transportation, which was controlled by particle grain size (2mm-200{\mu}m,\;200-100{\mu}m,\;100-50{\mu}m,\;50-20{\mu}m,\;<20{\mu}m), and vertical distribution of heavy metals. Sediment cores were sliced into 2 to 5 cm intervals to measure heavy metal concentrations in interstitial water and sediments with depth. Pb isotopic compositions of core samples were determined to calculate sedimentation rate. Regardless of sampling sites, levels of heavy metals and trace elements in bottom sediments are nearly constant with mean values of $14.9\;{\mu}g/g\;for\;As,\;0.81{\mu}g/g\;for\;Cd,\;30.7{\mu}g/g\;for\;Cu,\;34.7{\mu}g/g\;for\;Ni,\;63.3{\mu}g/g\;for\;Pb\;and\;87.9{\mu}g/g\;for\;Zn$. In general, Cu, Pb, Zn, Wi, and Cr in fraction of $<20{\mu}m$ exhibit the highest concentration, but content of As is the highest in grain size of $2\;mm-200\;{\mu}m$ and $200-100\;{\mu}m$. Fe and Mn occur as the dissolved compositions of the highest concentrations in interstitial waters and increase in their concentrations toward lower part of cores. On the contrary, concentrations of Zn and Cu show the highest value in the uppermost part in cores, suggesting these elements are released from reductive dissolution of hydroxides and oxidation of organic matters under different redox conditions. The highest accumulations of Cu, Ni, Pb, and Zn contents in the sediment cores are observed at 0-4 cm layers, and concentrations of Cu and Pb are especially high, implying these heavy metals are originated from anthropogenic sources. The apparent sedimentation rate estimated using unsupported $^{210}Pb$ is 0.91 cm $year^{-1}$, corresponding about 10 cm sedimentation in total depth since construction of Juam dam. These results will provide available information for management of bottom sediment in Juam reservoir.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.2
• /
• pp.34-45
• /
• 2016

Global warming and climate change have been caused by combustion of fossil fuels. The greenhouse gases contributed to the rise of temperature between $0.6^{\circ}C$ and $0.9^{\circ}C$ over the past century. Presently, fossil fuels account for about 88% of the commercial energy sources used. In developing countries, fossil fuels are a very attractive energy source because they are available and relatively inexpensive. The environmental problems with fossil fuels have been aggravating stress from already existing factors including acid deposition, urban air pollution, and climate change. In order to control greenhouse gas emissions, particularly CO2, fossil fuels must be replaced by eco-friendly fuels such as biomass. The use of renewable energy sources is becoming increasingly necessary. The biomass resources are the most common form of renewable energy. The conversion of biomass into energy can be achieved in a number of ways. The most common form of converted biomass is pellet fuels as biofuels made from compressed organic matter or biomass. Pellets from lignocellulosic biomass has compared to conventional fuels with a relatively low bulk and energy density and a low degree of homogeneity. Thermal pretreatment technology like torrefaction is applied to improve fuel efficiency of lignocellulosic biomass, i.e., less moisture and oxygen in the product, preferrable grinding properties, storage properties, etc.. During torrefacton, lignocelluosic biomass such as palm kernell shell (PKS) and empty fruit bunch (EFB) was roasted under an oxygen-depleted enviroment at temperature between 200 and $300^{\circ}C$. Low degree of thermal treatment led to the removal of moisture and low molecular volatile matters with low O/C and H/C elemental ratios. The mechanical characteristics of torrefied biomass have also been altered to a brittle and partly hydrophobic materials. Unfortunately, it was much harder to form pellets from torrefied PKS and EFB due to thermal degradation of lignin as a natural binder during torrefaction compared to non-torrefied ones. For easy pelletization of biomass with torrefaction, pellets from PKS and EFB were manufactured before torrefaction, and thereafter they were torrefied at different temperature. Even after torrefaction of pellets from PKS and EFB, their appearance was well preserved with better fuel efficiency than non-torrefied ones. The physical properties of the torrefied pellets largely depended on the torrefaction condition such as reaction time and reaction temperature. Temperature over $250^{\circ}C$ during torrefaction gave a significant impact on the fuel properties of the pellets. In particular, torrefied EFB pellets displayed much faster development of the fuel properties than did torrefied PKS pellets. During torrefaction, extensive carbonization with the increase of fixed carbons, the behavior of thermal degradation of torrefied biomass became significantly different according to the increase of torrefaction temperature. In conclusion, pelletization of PKS and EFB before torrefaction made it much easier to proceed with torrefaction of pellets from PKS and EFB, leading to excellent eco-friendly fuels.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.17 no.3
• /
• pp.666-671
• /
• 2003

Dental caries are the most commonly occurring chronic diseases in the dental field. Because of increasing sugar consumption and extension of average human life, these diseases are widely found all over the world as the most typical cause for a person to lose a tooth. Therefore, the development of more effective, substantial and safe preventive agents against dental caries is strongly required. Streptococcus mutans is known as the causative bacterial playing the most important role informing plaque and it is being noticed as major causative bacteria of dental caries. The present study was designed to investigate the effect of Asarum sieboldii Miquel(Aristolochiaceae) extracts on the growth, acid production, adhesion, and insoluble glucan synthesis of Streptococcus mutans(S. mutans). Both methanol and aqueous extracts showed concentration dependent inhibitory activity against the growth and acid production of S. mutans, and produced significant inhibition at the concentration of 100, 1,000 and 2,000 μg/ml compared to the control group(p<0.05 - p<0.01). The extracts markedly inhibited S. mutans adherence to HA treated with saliva, and cell adherence was repressed by more than 50% at the concentration of 10 μg/ml and complete inhibition was observed at the concentration of 2,000 μg/ml. On the activity of glucosyltransferase which synthesizes water insoluble glucan from sucrose, methanol and aqueous extracts showed more than 70% inhibition over the concentration of 1,000 μg/ml. Hence, we conclude that Asarum sieboldii might be a candidate of anticaries agent.

• Korean Journal of Pharmacognosy
• /
• v.40 no.3
• /
• pp.196-204
• /
• 2009

This study was carried out to investigate the in vivo and in vitro inhibitory effect of a traditional herbal complex (HC) extract prepared from a mixture of four oriental herbs (Dioscorea Rhizoma, Glycine soja Sieb. et Zucc, Bombycis corpus, Fermented Glycine soja) that have been widely used for the treatment and prevention of diabetes mellitus on hyperglycemia. The water extract of HC showed potent inhibitory effect on $\alpha$-glucosidase with $IC_{50}$ value of 1.24 mg/mL. Additionally, the ethanol extract of HC was also found to exhibit significant inhibitory effect against protein tyrosine phosphatase $1{\beta}$ ($PTP1{\beta}$), which is known as a major regulator of both insulin and leptin signaling. In the $PTP1{\beta}$ inhibitory assay, the most active n-hexane fraction obtained from the ethanol extract of HC, was identified as a mixture of fatty acid derivatives by gas chromatography-mass spectrometry (GC-MS). In high-fat diet-low dose streptozotocin (STZ)-induced diabetic rat, the water extract of HC improved the oral glucose intolerance as compared with rosiglitazone. HC also caused a marked decrease of body weight and fasting blood glucose and a significant improvement on glucose tolerance in metabolic syndrome mice model. These findings support that this traditional HC may be useful in the control of blood glucose in diabetes mellitus and metabolic syndrome.

• Neonatal Medicine
• /
• v.15 no.2
• /
• pp.151-159
• /
• 2008

Purpose : This study determined the prenatal and postnatal factors associated with complications and prognosis in premature infants with leukemoid reaction. Methods : We retrospectively reviewed the medical records of premature infants with gestational ages <37 weeks and low birth weights (<2,500 g) who were admitted immediately after birth to the neonatal intensive care unit at the Dongguk University Ilsan Hospital between June 2005 and July 2006. A leukemoid reaction was defined as an absolute neutrophil count (ANC) >30,000/$mm^3$. The infants who had leukemoid reaction comprised the study group, while the remainder of infants made up the control group. The relationships between maternal and neonatal variables and ANC were studied. Results : Leukemoid reaction was detected in 3.1% of the study infants (8 of 252). Factors more frequently associated with infants with leukemoid reaction were as follows: maternal chorioamnionitis, high levels of maternal and infant C-reactive protein, gestational age <37 weeks, birth weight <2,500 g, low Apgar score, prolonged ventilator support, and a high incidence of bronchopulmonary dysplasia (BPD). However, there were no significant differences with respect to the antenatal usage of steroids, the incidences of patent ductus arteriosus, necrotizing enterocolitis, intraventricular hemorrhage, retinopathy of prematurity, and mortality between the two groups. Conclusion : Leukemoid reaction in premature infants was associated with chorioamnionitis and high levels of serum C-reactive protein in mothers and infants, and BPD in infants. These findings suggest that leukemoid reaction is secondary to inflammation caused by infection.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.8
• /
• pp.1087-1096
• /
• 2010

This study was conducted to investigate the physiological activity of extracts of fresh mushrooms. The components were extracted by hot water; subsequently, the hot-water extract was subjected to 60% ethanol precipitation to yield high-molecular-weight (HMW) and low-molecular-weight (LMW) fractions. Total polyphenol contents, $\beta$-glucan contents, electron-donating ability (EDA), superoxide dismutase (SOD)-like activity, nitrite-scavenging activity, fibrinolytic activity, nitric oxide (NO) production, and inhibition of NO production of the mushroom extracts were measured using lipopolysaccharide (LPS)-stimulated murine macrophages, RAW 264.7 cells. The extracts of Lentinus edodes (Berk.) Singer and Pleurotus ostreatus (Fr.) Kummer contained the highest levels of $\beta$-glucan (33.5% and 25.57%, respectively). Further, the LMW fractions of the Phellinus linteus contained the highest levels of polyphenols (233.23 mg/g). The EDA of LMW fractions (10 mg/mL) of the Phellinus linteus and Agaricus bisporus were 80.74% and 51.35%, respectively. Further, SOD-like activities of the LMW fractions were high as compared to those of the HMW fractions. Nitrite-scavenging activities of the LMW fractions (pH 1.2; concentration, 10 mg/mL) of the Phellinus linteus and Pleurotus ostreatus (Fr.) Kummer were 75.95% and 41.05%, respectively. The fibrinolytic activity of the LMW fractions of all mushrooms showed no enzyme activity by fibrin plate assay. The fibrinolytic activity of the extracts of Tricholoma matsutake was the greatest inhibitory activity at 60.4%. Further study revealed that the mushroom extracts exhibited anti-inflammatory effects on RAW 264.7 cells. The LMW fraction ($500\;{\mu}g/mL$) of the Phellinus linteus considerably inhibited NO production (100%).

• Food Science and Preservation
• /
• v.15 no.3
• /
• pp.477-482
• /
• 2008

The quality characteristics of Goami by-product under the mixed enzyme treatment condition of $\alpha$-amylase and cellulase have been compared, and found the highest amount of soluble solids and reducing sugars at the $\alpha$-amylase treated group (A), and the contents revealed to show gradual decrease with the increase of cellulase content. The amounts of total dietary fiber and total sugars did not show large difference by both of enzyme concentration. The result of sugar analysis revealed the presence of all $G{\sim}G5$ in all treatment groups, and the content of malto-oligosaccharide recorded the highest content of 2,200 mg% at the $\alpha$-amylase treatment group (A). When the quality characteristic of the hydrolyzed powders manufactured by the optimum hydrolysis condition was compared, no significant color difference was found between samples. Among the contents of dietary fibers, insoluble dietary fiber was found to present in the lowest content of 6.95% at the Goami flour (GF) and the Goami by-product powder (GBPP) and Goami by-product hydrolysate powder (GBPHP) resulted the similar content around 14% and the highest soluble dietary fibers content was found in Goami by-product hydrolysate powder (GBPHP), which was followed by in the order of Goami by-product powder (GBPP) and Goami flour (GF), but the content variation was not large. The free amino acid was found to be highest in Goami by-product hydrolysate powder (GBPHP) followed by in the order of Goami by-product powder (GBPP) and Goami flour (GF). In the sugar analysis, the Goami by-product hydrolysate powder (GBPHP) was found with all $G{\sim}G5$ sugars by showing the highest amount of 1,800 mg% At the Goami by-product powder (GBPP), $G{\sim}G2$ sugars were detected with about 66 mg% and malto-oligosaccharides were not detected at the Goami flour (GF). Based upon the results, the functionality of Goami by-product hydrolysate powder (GBPHP) was found to be enforced compared to Goami flour (GF) and Goami by-product powder (GBPP), which allow us to expect it to be used as the various rice processing food source.

• Korean Journal of Food Science and Technology
• /
• v.46 no.5
• /
• pp.641-647
• /
• 2014

In this study, we evaluated the effect of Capsosiphon fulvescens extract (CFE) and its active compound, pheophorbide A (PhA), on diabetic kidney failure. Diabetes mellitus (DM) was induced by a single intraperitoneal injection of streptozotocin (STZ; 40 mg/kg body weight (BW)). After a week, the rats were orally administered CFE (4 and 20 mg/kg BW) or PhA (0.2 mg/kg BW) once a day for 9 weeks. After scarification, renal tissue samples were collected for biochemical and histochemical analyses. Our study showed that the treatment with CFE and PhA significantly decreased lipid peroxidation level and the activities of glutathione peroxidase and glutathione-S-transferase (p<0.05), but it increased glutathione level and the activities of glutathione reductase, superoxide dismutase, and catalase in the renal tissues (p<0.05). The CFE- and PhA-treated rats with DM showed improved histochemical appearance and decreased abnormal glycogen accumulation. Therefore, we suggest that PhA-containing CFE could exert renal protective effects against STZ-induced oxidative stress.

• Journal of Food Hygiene and Safety
• /
• v.33 no.2
• /
• pp.102-109
• /
• 2018

In the present study, a variety of polylactide (PLA) articles (n = 211) were tested for migration of lead (Pb), cadmium (Cd) and arsenic (As) into the food simulant (4% v/v acetic acid). Pb, Cd, and As were analyzed by inductively coupled plasma mass spectrometry (ICP-MS). Migration tests were performed at $70^{\circ}C$ and $100^{\circ}C$ for 30 min. The amounts of Pb, Cd, and As increased at $100^{\circ}C$ for 30 min compared with levels at $70^{\circ}C$. However, the migration at both conditions was very low. The maximum level of Pb at $100^{\circ}C$ for 30 min corresponded to 1% of the migration limit. The estimated daily intakes (EDI) based on safety evaluation ranged from $2.5{\times}10^{-5}$ to $2.0{\times}10^{-3}{\mu}g/kg\;bw/day$ for Pb, Cd, and As. The EDI calculated from migration of Pb at $100^{\circ}C$ for 30 min in PLA was the maximum value, $2.0{\times}10^{-3}{\mu}g/kg\;bw/day$, which corresponded to 0.055% of provisional tolerable weekly intake (PTWI, $25{\mu}g/kg\;bw/week$). The data from this study represent a valuable source for science-based safety control and management of hazardous heavy metals migrating from polylactide food contact materials.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.2
• /
• pp.72-80
• /
• 2019

Purpose: The purpose of this study is to compare and analyze the shear bond strength and fracture pattern in different enamel tooth surface treatments for resin splinting materials. Materials and Methods: G-FIX and LightFix were used as tooth splinting materials. Twenty bovine mandibular incisors were used for the preparation of the specimens. The exposed enamel surface was separated into four parts. Each tooth was treated with 37% phosphoric acid, 37% phosphoric acid + adhesive resin, 37% phosphoric acid + G-premio bond, and G-premio bond for each fraction. Shear bond strength was measured using a universal testing machine. After measuring the shear bond strength, the fractured surface of the specimen was magnified with a microscope to observe the fracture pattern. Two-way ANOVA was used to verify the interaction between the material and the surface treatment method. One-way ANOVA was used for comparison between the surface treatment methods of each material and post-hoc test was conducted with Scheffe's test. An independent t-test was conducted to compare shear bond strengths between materials in each surface treatment method. All statistics were conducted at 95% significance level. Results: G-FIX, a tooth splinting resin, showed similar shear bonding strength when additional adhesive resins were used when material was applied after only acid etching, and LightFix showed the highest shear bonding strength when additional adhesive resins were used after the acid etching. In addition, both G-FIX and LightFix showed the lowest shear bond strength when only self-etching adhesive was applied without additional acid etching. Verification of interactions observed interconnection between resins and surface treatment methods. Most of the mixed failure was observed in all counties. Conclusion: When using G-FIX and LightFix, which are tooth-splinting materials, it is considered that sufficient adhesion will be achieved even after applying only acid etching as instructed by the manufacturer.