• Journal of Sensor Science and Technology
• /
• v.24 no.2
• /
• pp.107-112
• /
• 2015

HIGHT is an 64-bit block cipher, which is suitable for low power and ultra-light implementation that are used in the network that needs the consideration of security aspects. This paper presents a parallel key scheduler that generates the whitening keys and subkeys simultaneously for both encryption and decryption processes. We construct the reverse LFSR and key generation blocks to generate the keys for decryption process. Then, the new key scheduler is made by sharing the common logics for encryption and decryption processes to minimize the increase in hardware complexity. From the simulation results, the logic size is increased 1.31 times compared to the conventional HIGHT. However, the performance of HIGHT including the proposed key scheduler can be increased by two times compared to the conventional counterpart.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.12
• /
• pp.4962-4967
• /
• 2010

Security of the electronic commercial transaction especially through the information communication network is gaining its significance due to rapid development of information and communication related fields. For that, some kind of cryptographic algorithm is already in use for the smart card. However, the growing needs of handling multimedia and real time communication bring the smart card into more stringent use of its resources. Therefore, we proposed a key scheduler block of the smart card to facilitate multimedia communication and real time communication.

• Convergence Security Journal
• /
• v.15 no.2
• /
• pp.81-89
• /
• 2015

HIGHT is an 64-bit block cipher, which is suitable for low power and ultra-light implementation that are used in the network that needs the consideration of security aspects. This paper presents a key scheduler that employs the presented LFSR and reverse LFSR that can generate four outputs simultaneously. In addition, we construct new key scheduler that generates 4 subkey bytes at a clock since each round block requires 4 subkey bytes at a time. Thus, the entire HIGHT processor can be controlled by single system clock with regular control mechanism. We synthesize the HIGHT processor using the VHDL. From the synthesis results, the logic size of the presented key scheduler can be reduced as 9% compared to the counterpart that is employed in the conventional HIGHT processor.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.401-403
• /
• 2015

This paper describes an efficient hardware design of 128-bit block cipher algorithm LEA(lightweight encryption algorithm). In order to achieve area-efficient and low-power implementation, round block and key scheduler block are optimized to share hardware resources for encryption and decryption. The key scheduler register is modified to reduce clock cycles required for key scheduling, which results in improved encryption/decryption performance. FPGA synthesis results of the LEA processor show that it has 2,364 slices, and the estimated performance for the master key of 128/192/256-bit at 113 MHz clock frequency is about 181/162/109 Mbps, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.12
• /
• pp.2333-2340
• /
• 2016

A LEA (Lightweight Encryption Algorithm) crypto-processor was designed, which supports three master key lengths of 128/ 192/256-bit, ECB and CTR modes of operation. To achieve high throughput rate, the round transformation block was designed with 128 bits datapath and a pipelined structure of 16 stages. Encryption/decryption is carried out through 12/14/16 pipelined stages according to the master key length, and each pipelined stage performs round transformation twice. The key scheduler block was optimized to share hardware resources that are required for encryption, decryption, and three master key lengths. The round keys generated by key scheduler are stored in 32 round key registers, and are repeatedly used in round transformation until master key is updated. The pipelined LEA processor was verified by FPGA implementation, and the estimated performance is about 8.3 Gbps at the maximum clock frequency of 130 MHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.3A
• /
• pp.399-405
• /
• 2000

In this paper, we deal with block cipher algorithm IDEA(international data encryption algorithm), previously known as typical block cipher system. first of all, analysing key scheduler we classify the key sequences with the used key bit and the unused key bits in each round. with this properties we propose the two method, which are differential analysis using differences of plaintext pairs and linear analysis using LSB bit of plaintexts and key sequences.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.7
• /
• pp.1608-1616
• /
• 2015

This paper describes an efficient hardware implementation of lightweight encryption algorithm LEA-128/192/256 which supports for three master key lengths of 128/192/256-bit. To achieve area-efficient and low-power implementation of LEA crypto- processor, the key scheduler block is optimized to share hardware resources for encryption/decryption key scheduling of three master key lengths. In addition, a parallel register structure and novel operating scheme for key scheduler is devised to reduce clock cycles required for key scheduling, which results in an increase of encryption/decryption speed by 20~30%. The designed LEA crypto-processor has been verified by FPGA implementation. The estimated performances according to master key lengths of 128/192/256-bit are 181/162/109 Mbps, respectively, at 113 MHz clock frequency.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.11
• /
• pp.33-43
• /
• 2002

This paper describes a design of cryptographic processor that implements the AES (Advanced Encryption Standard) block cipher algorithm "Rijndael". To achieve high throughput rate, a sub-pipeline stage is inserted into a round transformation block, resulting that two consecutive round functions are simultaneously operated. For area-efficient and low-power implementation, the round transformation block is designed to share the hardware resources for encryption and decryption. An efficient on-the-fly key scheduler is devised to supports the three master-key lengths of 128-b/192-b/256-b, and it generates round keys in the first sub-pipeline stage of each round processing. The Verilog-HDL model of the cryptoprocessor was verified using Xilinx FPGA board and test system. The core synthesized using 0.35-${\mu}m$ CMOS cell library consists of about 25,000 gates. Simulation results show that it has a throughput of about 520-Mbits/sec with 220-MHz clock frequency at 2.5-V supply.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.285-287
• /
• 2014

This paper describes a design of area-efficient/low-power cryptographic processor for lightweight block cipher algorithm HIGHT which was approved as a cryptographic standard by KATS and ISO/IEC. The HIGHT algorithm which is suitable for the security of IoT(Internet of Things), encrypts a 64-bit plain text with a 128-bit cipher key to make a 64-bit cipher text, and vice versa. For area-efficient and low-power implementation, we adopt 32-bit data path and optimize round transform block and key scheduler to share hardware resources for encryption and decryption.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.777-779
• /
• 2014

The LEA(Lightweight Encryption Algorithm) is a 128-bit high-speed/lightweight block cipher algorithm developed by National Security Research Institute(NSRI) in 2012. The LEA encrypts plain text of 128-bit using cipher key of 128/192/256-bit, and produces cipher text of 128-bit, and vice versa. To reduce hardware complexity, we propose an efficient architecture which shares hardware resources for encryption and decryption in round transformation block. Hardware sharing technique for key scheduler was also devised to achieve area-efficient and low-power implementation. The designed LEA cryptographic processor was verified by using FPGA implementation.