• 제목/요약/키워드: Kernel Size

검색결과 234건 처리시간 0.029초

제빵용 우리밀과 수입밀 원맥의 이화학, 미생물, 항산화 특성 비교 (Comparison of Physicochemical, Microbial and Antioxidant Properties in Domestic and Imported Wheat Kernels for Bread Making)

  • 곽한섭;김미정;허정애;김민정;심재원;김의웅;김훈;김상숙
    • 한국식품영양학회지
    • /
    • 제31권1호
    • /
    • pp.17-23
    • /
    • 2018
  • The objective of this study was to compare physicochemical, microbial, and antioxidant properties of domestic and imported wheat kernels for bread making. Two domestic (JK1, 2) and three imported (ND, DNS, and CWRS) kernels were compared. Domestic kernels had higher moisture contents, and lower ash and protein contents (p<0.05). In grain characteristics, JK1 had 13.62% of damaged kernels, which was the highest among the samples (p<0.05). JK2 was similar to imported kernels in the ratio of sound kernels, foreign materials, and damaged kernels. Kernel size of JK1, 2 was larger than the imported kernels; therefore, kernels area and perimeter were higher by the image analyzer. Domestic kernels hid lower total aerobic counts the imported kernels (p<0.05). Domestic kernels and DNS had no yeast, while NS and CWRS had yeast in kernels. DNS (3.08 mg gallic acid equivalent (GAE)/g) had the highest total polyphenol content (TPC), followed by JK1 (2.81 mg GAE/g). JK2 had the lowest amount of TPC as 2.26 mg GAE/g. Total flavonoid content (TFC) was the highest in DNS as 0.44 mg catechin equivalent (CE)/g and JK2 was the lowest as 0.12 mg CE/g. Domestic wheat kernels had lower protein content and lightness than the imported wheat kernels so that flour from domestic wheat kernels may have lower quality for baking.

Motion JPEG2000을 위한 리프팅 프로세서의 ASIC 설계 (ASIC Design of Lifting Processor for Motion JPEG2000)

  • 서영호;김동욱
    • 한국통신학회논문지
    • /
    • 제30권5C호
    • /
    • pp.344-354
    • /
    • 2005
  • 본 논문에서는 JPEG2000을 위한 새로운 리프팅 구조를 제안하고 ASIC으로 구현하였다. 동일한 구조의 반복적인 연산을 통해서 수행되는 리프팅의 특성을 이용하여 단위 연산을 수행할 수 있는 셀을 제안하고 이를 확장하여 전체 리프팅을 재구성하였다. 먼저, 리프팅 연산의 동작 순서를 분석하고 하드웨어의 구현을 고려한 인과성을 부여한 후 단위 셀을 최적화하였다. 제안한 셀의 단순한 확장을 통해서 리프팅 커널을 구성하고, 이를 이용하여 Motion JPEG2000을 위한 리프팅 프로세서를 구현하였다. 구현한 리프팅 커널은 최대 $1024{\times}1024$ 크기의 타일(Tile)을 수용할 수 있고, (9,7)필터를 이용한 손실압축과 (5,3)필터를 이용한 무손실압축을 모두 지원한다. 또한 입력 데이터율과 동일한 출력율을 가지고, 일정 대기지연 시간이후 4가지 부대역(LL, LH, HL, HH)의 웨이블릿 계수들을 연속적으로 동시에 출력할 수 있다. 구현한 리프팅 프로세서는 SAMSUNG의 $0.35{\mu}m$ CMOS 라이브러리를 이용하여 ASIC 과정을 거쳤다. 약 9만개의 게이트를 사용하고, 곱셈기로 사용된 매크로 셀에 따라 차이는 있지만 약 150MHz 이상의 속도에서 안정적으로 동작이 가능하였다. 최종적으로 기존의 연구 및 상용 IP와의 비교에서도 종합적으로 우수한 성능을 보이는 것을 확인할 수 있었다.

Motion JPEG2000을 위한 리프팅 프로세서의 ASIC 설계 (ASIC Design of Lifting Processor for Motion JPEG2000)

  • 서영호;김동욱
    • 한국통신학회논문지
    • /
    • 제30권7C호
    • /
    • pp.647-657
    • /
    • 2005
  • 본 논문에서는 JPEG2000을 위한 새로운 리프팅 구조를 제안하고 ASIC으로 구현하였다. 동일한 구조의 반복적인 연산을 통해서 수행되는 리프팅의 특성을 이용하여 단위 연산을 수행할 수 있는 셀을 제안하고 이를 확장하여 전체 리프팅을 재구성하였다. 먼저, 리프팅 연산의 동작 순서를 분석하고 하드웨어의 구현을 고려한 인과성을 부여한 후 단위 셀을 최적화하였다. 제안한 셀의 단순한 확장을 통해서 리프팅 커널을 구성하고, 이를 이용하여 Motion JPEG2000을 위한 리프팅 프로세서를 구현하였다. 구현한 리프팅 커널은 최대 1024$\times$1024 크기의 타일 (Tile)을 수용할 수 있고, (9,7)필터를 이용한 손실압축과 (5,3)필터를 이용한 무손실압축을 모두 지원한다. 또한 입력 데이터율과 동일한 출력율을 가지고, 일정 대기지연 시간이후 4가지 부대역(LL, LH, HL, HH)의 웨이블릿 계수들을 연속적으로 동시에 출력할 수 있다. 구현한 리프팅 프로세서는 SAMSUNG의 0.35$\mu$m CMOS 라이브러리를 이용하여 ASIC 과정을 거쳤다. 약 9만개의 게이트를 사용하고, 곱셈기로 사용된 매크로 셀에 따각 차이는 있지만 약 150MHz 이상의 속도에서 안정적으로 동작이 가능하였다. 최종적으로 기존의 연구 및 상용 IP와의 비교에서도 종합적으로 우수한 성능을 보이는 것을 확인할 수 있었다.

한국의 잔여지오이드고 모델링을 위한 FFT 및 LSC 방법 비교 (Comparison between FFT and LSC Method for the Residual Geoid Height Modeling in Korea)

  • 이동하;윤홍식;서용철
    • 대한토목학회논문집
    • /
    • 제31권2D호
    • /
    • pp.323-334
    • /
    • 2011
  • 본 연구에서는 일반적인 중력지오이드 모델 결정방법인 Remove-Restore(R-R) 기법 적용 시 FFT 방법 및 LSC 방법에 의한 잔여지오이드고 모델링을 각각 적용하고, 이에 대한 정확도를 분석하여 보다 효율적인 지오이드 결정 방안을 제시하고자 하였다. 이를 위해 우리나라 육상 및 해상에서 측정된 총 6,296점의 중력관측자료에 대하여 Stokes 공식을 적용한 다중밴드 구면 FFT 방법 및 통계적 결정방법인 LSC 방법을 각각 적용하였으며, 503점의 GPS/Levelling 자료에서 획득된 기하학적 지오이드고를 이용하여 모델링시 계산 결과의 정확도 향상을 위하여 결정되어야 하는 다양한 계산요소 및 적합한 계산과정을 결정하였다. 그 후 각 방법에 의하여 계산된 잔여지오이드고를 통계적으로 분석하여 한국의 지오이드 결정을 위하여 적합한 잔여지오이드고 모델링 방안을 검토하였다. 그 결과 LSC 방법의 경우 중력관측자료의 오차, 분포밀도의 부족 및 공분산 해석시 지역별 특성의 영향으로 정확한 잔여지오이드고의 모델링이 적용되지 못하였으며, 다중밴드 구면 FFT 방법의 경우 Stokes 적분을 위한 적절한 적분반경 및 수정 kernel의 적용을 통해 LSC 방법보다 약 10cm 이상의 정확도가 향상된 잔여지오이드고가 계산되었다.

GCM과 수문모형의 불확실성을 고려한 기후변화에 따른 한반도 미래 수자원 전망 (Future Korean Water Resources Projection Considering Uncertainty of GCMs and Hydrological Models)

  • 배덕효;정일원;이병주;이문환
    • 한국수자원학회논문집
    • /
    • 제44권5호
    • /
    • pp.389-406
    • /
    • 2011
  • 본 연구에서는 GCM 및 유출모형의 불확실성을 고려하여 기후변화에 따른 미래 한반도 수자원의 변화를 전망하고, 그 결과에서 나타나는 불확실성을 평가하고자 하였다. 온실가스 배출시나리오와 GCMs의 불확실성을 고려하기 위해 IPCC AR4에 적용되었던 3개 시나리오(A2, A1B, B1)에 대한 13 GCMs 결과를 이용하였으며, 유출모형 구조 및 증발산량 산정방법에 따른 영향을 고려하기 위해 PRMS, SWAT, SLURP 모형을 선정하였고 각 모형별로 2~3개의 증발산량 방법을 고려하였다. 결과적으로 우리나라 109개 중권역 유역에 대해 312개의 결과가 제시되었으며, 이를 이용하여Gaussian kernel density function을 산정함으로써 평가결과의 앙상블 평균과 불확실성을 동시에 제시하였다. 분석 결과 여름철과 겨울철 유출량은 증가, 봄철은 감소할 것으로 전망되었다. 연평균유출량은 전체유역에서 증가할 것으로 전망되었으며, 공간적으로는 한강유역이 위치한 북쪽유역이 남쪽유역에 비해연 유출량이 더 크게 증가할 것으로 전망되었다. 연평균유출량의 증가는 여름철 유출량 증가에 따른 결과로, 기후변화의 영향은 한국에서 유출량의 계절편중을 심화시켜 수자원 관리를 더욱 어렵게 할 것으로 전망되었다. 평가결과에서 나타난 불확실성은 겨울철 유출량에서 가장 크고 여름철 유출량에서 가장 적은 것으로 나타났다.

내장형 시스템의 원활한 멀티미디어 서비스 지원을 위한 커널 수준의 RTP (A Kernel-level RTP for Efficient Support of Multimedia Service on Embedded Systems)

  • 선동국;김태웅;김성조
    • 한국정보과학회논문지:컴퓨팅의 실제 및 레터
    • /
    • 제10권6호
    • /
    • pp.460-471
    • /
    • 2004
  • RTP는 VoD, AoD, VoIP와 같은 멀티미디어 서비스를 위해 실시간 데이타를 전송하기에 적합하도록 설계되어 있어, RTSP, H.323, SIP 등 실시간 데이타 전송 프로토콜로서 사용되고 있다. 내장형 시스템에서도 원활한 멀티미디어 서비스를 위해 내장형 시스템용 RTP 프로토콜 스택이 필요하지만 현재까지 이러한 RTP 프로토콜 스택은 전무한 상태이다. 본 논문은 내장형 시스템에 적합하도록 RTP 프로토콜 스택을 커널 수준에서 지원하는 embeddedRTP에 대하여 설명한다. EmbeddedRTP는 UDP 모듈에 포함되도록 설계되었기 때문에,'rcp/lp 서비스를 필요로 하는 애플리케이션은 기존과 같이 동작하고, RTP프로토콜 스택을 사용하는 애플리케이션은 embeddedRTP API를 이용하여 RTP 서비스를 받을 수 있다. EmbeddedRTP는 RTP 패킷이 도착했을 때, 패킷의 포트 번호와 세션 정보를 이용하여 세션별 패킷 버퍼에 저장한다. 애플리케이션과 embeddedRTP간의 통신은 시스템 콜과 시그널 메커니즘을 통해 이루어지며, embeddedRTP API를 제공함으로써 애플리케이션 개발이 용이하도록 했다. PDA 상에서 멀티미디어 스트리밍 서비스를 이용하여 embeddedRTP의 성능을 분석한 결과, 비교대상인 VCL RTP에 비해 코드사이즈는 약 58%정도 감소된 반면, 패킷 처리속도는 약 7.8배 빨라졌다.

보리호위축병 (Barley yellow mosaic virus)에 의한 보리의 생육 피해 및 세포학적 변화 (Growth Damage and Alteration of Cellular Tissue of Barley Infected by Barley yellow mosaic virus)

  • 박종철;이재동;서재환;김양길;정선기;김형무
    • 식물병연구
    • /
    • 제10권1호
    • /
    • pp.34-38
    • /
    • 2004
  • 보리호위축병(BaYMV)에 의한 보리의 생육 피해 및 세포학적 변화를 조사하였다. 보리호위축병에 이병된 포장의 보리는 생육 및 수량 구성요소가 피해를 받은 것으로 조사되었다. 보리호위축병에 의해 간장은 건전주에 비해 25cm 작아져 36%의 간장 단축율을 보였으며, 이 줄기신장의 억제는 $m^2$당 수수와 수당립수 등을 감소시켰다. 이들 생육의 피해로 인해 이병포장에서의 수량은 건전포장에 비해 70%이상 감소된 것으로 조사되었다. BaYMV에 감염된 보리 잎에는 전형적인 Bymovirus의 pinwheel형의 세포내 봉입체의 형성이 확인되었다. 또한 BaYMV는 줄기 신장과 관계가 있는 줄기와 추수도, 그리고 마디조직의 세포 신장에 영향을 미치는 것으로 조사되었다. 특히, 줄기의 세포는 표피세포의 길이나 유관속 조직 크기와 같은 세포 생장에 큰 피해를 받은 것으로 조사되었다. 추수도 조직에서는 섬유조직과 cortex 세포의 크기에서 뚜렷한 차이를 보였으며, 마디 조직에서는 건전주의 조직 전체 크기가 이병주에 비해 1.5배 정도 큰 결과를 보였다. 이들 결과는 BaYMV의 감염은 세포의 신장이 억제에 영향을 미치고, 이는 보리의 줄기 신장과 생육을 억제하게 되어 결국 수량 감소를 일으키는 것으로 나타났다.

Analysis of Broken Rice Separation Efficiency of a Laboratory Indented Cylinder Separator

  • Kim, Myoung Ho;Park, Seung Je
    • Journal of Biosystems Engineering
    • /
    • 제38권2호
    • /
    • pp.95-102
    • /
    • 2013
  • Purpose: Using a laboratory indented cylinder separator, broken rice separation experiments were conducted and the characteristics of the separation process were studied to provide information for developing a prototype indented cylinder broken rice separator. Methods: Rice (Ilmi variety) milled in a local RPC was used for the experiment. Rice kernels were classified into four groups according to their length l; whole kernels (I > 3.75 mm), semi-whole kernels (2.5 < I < 3.75 mm), broken kernels (1.75 < I < 2.5 mm), and foreign matters (I < 1.75 mm). A laboratory grain cleaner, Labofix '90 (Schmidt AG, Germany) was used for the experiments. Experiments were designed as a $4{\times}4$ factorial arrangement in randomized blocks with three replications. Cylinder rotational speeds (17, 34, 51, 68 rpm) and trough angles (15, 37.5, 60, $82.5^{\circ}$) were the two factors and feed rates (25, 50 kg/h), indent shapes (Us, $S_1$ type), and indent sizes (2.5, 3.75 mm) were treated as the blocks. Two 125 g samples and one 125 g sample were taken at the cylinder outlet and from the trough, respectively. The whole, semi-whole, and broken kernel weight ratio of the samples and feed was determined by a rice sizing device. From these weight ratios, purities, degrees of extraction and coefficient of separation efficiency were calculated. Results: Trough angle, cylinder speed, and their interaction on the coefficient of separation efficiency were statistically significant. Cylinder speed of 17, 34, and 51 rpm made the most effective separation when the trough angle was $15^{\circ}$ or $37.5^{\circ}$, $60^{\circ}$, and $82.5^{\circ}$, respectively. Maximum values of coefficient of separation efficiency were in the range of 60 to 70% except when the indent size was 2.5 mm and were recorded for the combinations of low cylinder speed (17 rpm) with medium trough angle ($37.5^{\circ}$ or $60^{\circ}$). Indent shape did not appear to make any noticeable difference in separation efficiency. Conclusions: Due to the interaction effect, the trough angle needs to be increased appropriately when an increase in cylinder speed is made if a rapid drop of effectiveness of separation should be avoided. In commercial applications, $S_1$ type indents are preferred because of their better manufacturability and easier maintenance. For successful separation of broken kernels, the indent size should be set slightly bigger than the actual sizes of broken kernels: an indent size of 3.0 mm for separating broken kernels shorter than 2.5 mm.

다분류 SVM을 이용한 DEA기반 벤처기업 효율성등급 예측모형 (The Prediction of DEA based Efficiency Rating for Venture Business Using Multi-class SVM)

  • 박지영;홍태호
    • Asia pacific journal of information systems
    • /
    • 제19권2호
    • /
    • pp.139-155
    • /
    • 2009
  • For the last few decades, many studies have tried to explore and unveil venture companies' success factors and unique features in order to identify the sources of such companies' competitive advantages over their rivals. Such venture companies have shown tendency to give high returns for investors generally making the best use of information technology. For this reason, many venture companies are keen on attracting avid investors' attention. Investors generally make their investment decisions by carefully examining the evaluation criteria of the alternatives. To them, credit rating information provided by international rating agencies, such as Standard and Poor's, Moody's and Fitch is crucial source as to such pivotal concerns as companies stability, growth, and risk status. But these types of information are generated only for the companies issuing corporate bonds, not venture companies. Therefore, this study proposes a method for evaluating venture businesses by presenting our recent empirical results using financial data of Korean venture companies listed on KOSDAQ in Korea exchange. In addition, this paper used multi-class SVM for the prediction of DEA-based efficiency rating for venture businesses, which was derived from our proposed method. Our approach sheds light on ways to locate efficient companies generating high level of profits. Above all, in determining effective ways to evaluate a venture firm's efficiency, it is important to understand the major contributing factors of such efficiency. Therefore, this paper is constructed on the basis of following two ideas to classify which companies are more efficient venture companies: i) making DEA based multi-class rating for sample companies and ii) developing multi-class SVM-based efficiency prediction model for classifying all companies. First, the Data Envelopment Analysis(DEA) is a non-parametric multiple input-output efficiency technique that measures the relative efficiency of decision making units(DMUs) using a linear programming based model. It is non-parametric because it requires no assumption on the shape or parameters of the underlying production function. DEA has been already widely applied for evaluating the relative efficiency of DMUs. Recently, a number of DEA based studies have evaluated the efficiency of various types of companies, such as internet companies and venture companies. It has been also applied to corporate credit ratings. In this study we utilized DEA for sorting venture companies by efficiency based ratings. The Support Vector Machine(SVM), on the other hand, is a popular technique for solving data classification problems. In this paper, we employed SVM to classify the efficiency ratings in IT venture companies according to the results of DEA. The SVM method was first developed by Vapnik (1995). As one of many machine learning techniques, SVM is based on a statistical theory. Thus far, the method has shown good performances especially in generalizing capacity in classification tasks, resulting in numerous applications in many areas of business, SVM is basically the algorithm that finds the maximum margin hyperplane, which is the maximum separation between classes. According to this method, support vectors are the closest to the maximum margin hyperplane. If it is impossible to classify, we can use the kernel function. In the case of nonlinear class boundaries, we can transform the inputs into a high-dimensional feature space, This is the original input space and is mapped into a high-dimensional dot-product space. Many studies applied SVM to the prediction of bankruptcy, the forecast a financial time series, and the problem of estimating credit rating, In this study we employed SVM for developing data mining-based efficiency prediction model. We used the Gaussian radial function as a kernel function of SVM. In multi-class SVM, we adopted one-against-one approach between binary classification method and two all-together methods, proposed by Weston and Watkins(1999) and Crammer and Singer(2000), respectively. In this research, we used corporate information of 154 companies listed on KOSDAQ market in Korea exchange. We obtained companies' financial information of 2005 from the KIS(Korea Information Service, Inc.). Using this data, we made multi-class rating with DEA efficiency and built multi-class prediction model based data mining. Among three manners of multi-classification, the hit ratio of the Weston and Watkins method is the best in the test data set. In multi classification problems as efficiency ratings of venture business, it is very useful for investors to know the class with errors, one class difference, when it is difficult to find out the accurate class in the actual market. So we presented accuracy results within 1-class errors, and the Weston and Watkins method showed 85.7% accuracy in our test samples. We conclude that the DEA based multi-class approach in venture business generates more information than the binary classification problem, notwithstanding its efficiency level. We believe this model can help investors in decision making as it provides a reliably tool to evaluate venture companies in the financial domain. For the future research, we perceive the need to enhance such areas as the variable selection process, the parameter selection of kernel function, the generalization, and the sample size of multi-class.

한국(韓國) 재래종(在來種) 옥수수의 계통분류(系統分類) 및 유전적(遺傳的) 특성(特性)에 관(關)한 연구(硏究) (Studies on Classification and Genetic Nature of Korean Local Corn Lines)

  • 이인섭;최봉호
    • 농업과학연구
    • /
    • 제9권1호
    • /
    • pp.396-450
    • /
    • 1982
  • 육종(育種) 자료(資料)를 얻기위해 수집(蒐集)한 한국(韓國) 재래종(在來種) 옥수수 57계통(系統)에 대(對)하여 주성분(主成分) 분석(分析)을 이용(利用)하여 재래종(在來種) 옥수수를 해석(解析)하고 계통분류(系統分類)를 하고 분류(分類)된 계통군별(系統群別)로 주요(主要) 특성(特性)에 대(對)한 유전적(遺傳的) 특성(特性)을 구명(究明)하고자 본(本) 연구(硏究)를 수행(修行)하였던 바 그 결과(結果)를 요약(要約)하면 다음과 같다. 1. 특성(特性)들의 평균치(平均値)는 모든 특성(特性)에서 계통간(系統間) 차이(差異)가 있었으며 비중(比重)을 제외(除外)한 모든 특성(特性)에서 교배유형별(交配類型別)로 차이(差異)가 있었는데 출수기(出穗期)까지의 일수(日數)를 제외(除外)한 모든 특성(特性)에서 자식(自殖)된 계통(系統)의 것은 세력(勢力)이 감소(減少)되었고 톱교배(交配)된 계통(系統)의 것은 세력(勢力)이 증대(增大) 되었다. 2. 특성간(特性間)의 상관계수(相關係數)는 0.99~-0.59 사이에 분포(分布)하였는데 특성간(特性間)의 상관(相關)은 대체(大體)로 낮은 것이 많았다. 그러나 수량구성요소(收量構成要素)와 관련(關聯)된 주요특성(主要特性)에서는 상관(相關)이 높았고 교배유형(交配類型)에 따른 특성간(特性間)의 상관계수(相關係數)의 크기는 별(別) 차이(差異)가 없었다. 3. 27개(個) 특성(特性) 가운데서 12개(個)의 주요특성(主要特性)을 이용(利用)한 주성분(主成分) 분석(分析)에서 제(第)4 주성분(主成分)까지를 가지고 전(全) 변동(變動)의 86.4%를 형매교배(兄妹交配)에서, 84.3%를 자식교배(自殖交配)에서 81.1%를 톱교배(交配)에서 각각(各各) 설명(說明)할 수 있었다. 4. 주성분(主成分)에 대(對)한 특성(特性)의 기여율(寄與率)은 특성(特性)에 따라 달랐고 상위(上位) 주성분(主成分)에서 컸으며 하위(下位) 주성분(主成分)에서 작았다. 5. 주성분(主成分)과 특성간(特性間)의 상관계수(相關係數)는 주성분(主成分)의 생물학적(生物學的) 의의(意義)와 주성분(主成分)에 대응(對應)한 식물체(植物體)의 형(型)을 명확(明確)히 하였는데 제(第)1 주성분(主成分)은 식물체(植物體)의 크기에 관련(關聯)된 주성분(主成分)이었고, 제(第)2 주성분(主成分)은 식물체(植物體)의 분화(分化) 및 생장기간(生長期間)에 관련(關聯)된 주성분(主成分)이었고, 제(第)3 주성분(主成分)과 제(第)4 주성분(主成分)은 형매교배(兄妹交配)된 계통(系統) 및 자식계통(自殖系統)에서는 뚜렷한 특징(特徵)이 없었으나 톱교배(交配)된 계통(系統)에서는 엽(葉)의 크기에 관련(關聯)된 주성분(主成分)이었다. 6. 계통간(系統間) 거리(距離)에 의(依)해 57계통(系統)은 4개(個)의 계통군(系統群)으로 분류(分類)되었으나 전계통(全系統)의 91.1%인 52계통(系統)이 계통군(系統群) I로 분류(分類)되어 수집(蒐集)된 재래종(在來種) 옥수수의 대부분(大部分)이 동일계통(同一系統)인 것으로 나타났고, 계통군(系統群) II에는 3계통(系統)이, 계통군(系統群) III과 계통군(系統群) IV에는 각각(各各) 1계통(系統)이 속(屬)하였다. 계통군(系統群) I은 조생(早生), 단간(短稈), 중형자수(中型雌穗), 중립(中粒) 및 중수(中收) 계통(系統)들이었고, 계통군(系統群) II는 만생(晩生), 중간(中稈), 소형자수(小型雌穗), 소립(小粒), 다자수(多雌穗) 및 다수(多收) 계통(系統)들이었다. 계통군(系統群) III은 중생(中生), 장간(長稈), 소형자수(小型雌穗) 및 소립(小粒), 소수(少收) 계통(系統)들이었고, 계통군(系統群) IV는 중생(中生), 장간(長稈), 대형자수(大型雌穗), 소자수(少雌穗) 및 중수계통(中收系統)이었다. 7. 특성(特性)들의 자식열세도(自殖劣勢度)는 계통(系統)에 따라 차이(差異)가 있었으며 수량(收量), 이삭중(重), 초장(草長) 등(等)에서 비교적(比較的) 크게 나타났고, 분류(分類)된 군별(群別) 자식열세도(自殖劣勢度)는 100 입중(粒重), 엽수(葉數), 엽장(葉長) 및 출수기(出穗期)까지의 일수(日數) 등(等)의 특성(特性)이 계통군(系統群) I에서 컸고, 기타의 특성(特性)은 계통군(系統群) II에서 컸다. 8. 특성(特性)들의 잡종강세도(雜種强勢度)는 계통간(系統間) 차이(差異)가 있었으며 이삭중(重), 이삭당(當) 입중(粒重), 100입중(粒重) 및 엽장(葉長) 등(等)에서 높았으며 분류(分類)된 군별(群別)로 보면 이삭길이, 이삭직경(直徑), 이삭중(重), 이삭당(當) 입중(粒重), 100 입중(粒重) 및 엽장(葉長) 등(等)의 특성(特性)은 계통군(系統群) II에서 높았고 기타의 특성(特性)은 계통군(系統群) I에서 높았다. 9. 특성(特性)들의 동질접합체(同質接合體) 정도(程度)는 이삭중(重)(79.1%)에서 가장 높았으며 이삭 수(數)(-2.1%)에서 가장 낮았는데 특성별(特性別)로 큰 차이(差異)가 있었다. 분류(分類)된 군별(群別)에 있어서도 동질접합체(同質接合體) 정도(程度)는 특성(特性)에 따라 차이(差異)가 있었는데 계통군(系統群) II에서 높은 것이 많았고 계통군(系統群) I에서 낮은 것이 많았다. 10. 형매교배(兄妹交配)된 계통(系統)의 특성(特性)과 톱 교배(交配)된 계통(系統)의 특성(特性)과의 상관관계(相關關係)는 모든 특성(特性)에서 정(正)의 상관(相關)을 나타내었으며 이삭수(數), 초장(草長), 엽장(葉長), 수량(收量) 및 단백질(蛋白質) 함량(含量) 등(等)에서 높은 상관(相關)을 나타내었으며 이삭 직경(直徑), 100입중(粒重) 및 엽수(葉數) 등(等)에서는 유의성(有意性)이 인정(認定)되지 않았다.

  • PDF