• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.7
• /
• pp.621-626
• /
• 2005

With precise GPS carrier positioning result, we can get attitude information if GPS antenna has adequate attaching position on the vehicle. In this case, baseline length information can be bandied as an additional measurement or constraint. In this paper, we have proposed a method to improve the attitude accuracy. To overcome nonlinearity of baseline observation model, we analyze attitude estimation result using existing estimation method like a least square method and Kalman filter, and apply a new nonlinear estimation method an unscented Kalman filter Finally we confirm the improvement of attitude estimation result in the case of appling the unscented Kalman filter.

• Journal of Korean Society of Transportation
• /
• v.20 no.5
• /
• pp.145-152
• /
• 2002

Real-time queueing information and/or predictive queue built-up information can be a good criterion in selecting travel options, such as routes, both for users, and for operators in operating transportation system. Provided properly, it will be a key information for reducing traffic congestion. Also, it helps drivers be able to select optimal roues and operators be able to manage the system effectively as a whole. To produce the predictive queue information, this paper proposes a predictive model for estimating and predicting queue lengths, mainly based on Kalman Filter. It has a structure of having state space model for predicting queue length which is set as observational variable. It has been applied for the Namsan first tunnel and the application results indicate that the model is quite reasonable in its efficacy and can be applicable for various ATIS system architecture. Some limitations and future research agenda have also been discussed.

• Journal of International Society for Simulation Surgery
• /
• v.2 no.1
• /
• pp.17-25
• /
• 2015

Purpose In this paper, we propose a robust 3D vessel tracking algorithm by utilizing an active contour model and unscented Kalman filter which are the two representative algorithms on segmentation and tracking. Materials and Methods The proposed algorithm firstly accepts user input to produce an initial estimate of vessel boundary segmentation. On each Computed Tomography Angiography (CTA) slice, the active contour is applied to segment the vessel boundary. After that, the estimation process of the unscented Kalman filter is applied to track the vessel boundary of the current slice to estimate the inter-slice vessel position translation and shape deformation. Finally both active contour and unscented Kalman filter are inter-operated for vessel segmentation of the next slice. Results The arbitrarily shaped blood vessel boundary on each slice is segmented by using the active contour model, and the Kalman filter is employed to track the translation and shape deformation between CTA slices. The proposed algorithm is applied to the 3D visualization of chest CTA images using graphics hardware. Conclusion Through this algorithm, more opportunities, giving quick and brief diagnosis, could be provided for the radiologist before detailed diagnosis using 2D CTA slices, Also, for the surgeon, the algorithm could be used for surgical planning, simulation, navigation and rehearsal, and is expected to be applied to highly valuable applications for more accurate 3D vessel tracking and rendering.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.351-353
• /
• 2006

In this paper, we present the traditional GPS Position- Velocity (PV) model to apply for both Discrete-Time Kalman Filter and Discrete-Time $H_{\infty}$ Filter. The positioning algorithms of both filters are proposed for a stand-alone low-cost GPS module to increase its accuracy. For disturbance cancellation, the Kalman Filter requires the statistical information about process and measurement noises while the $H_{\infty}$ Filter only requires that these noises are bounded. Experiments show that with the same measurement data, $H_{\infty}$ Filter gives us better positioning results compared with Least-Squared method and Kalman Filter.

• Journal of Korea Water Resources Association
• /
• v.53 no.3
• /
• pp.201-214
• /
• 2020

This study proposes a bias correction method of dual-pol radar rain rate in real time using the dual Kalman filter. Unlike the conventional Kalman filter, the dual Kalman filter predicts state variables with two systems (state estimation system and model estimation system) at the same time. Bias of rain rate is corrected by applying the bias correction ratio to the rain rate estimate. The bias correction ratio is predicted from the state-space model of the dual Kalman filter. This method is applied to a storm event with long duration occurred in July 2016. Most of the bias correction ratios are estimated between 1 and 2, which indicates that the radar rain rate is underestimated than the ground rain rate. The AR (1) model is found to be appropriate for explaining the time series of the bias correction ratio. The time series of the bias correction ratio predicted by the dual Kalman filter shows a similar tendency to that of observation data. As the variability of the bias correction increases, the dual Kalman filter has better prediction performance than the Kalman filter. This study shows that the dual Kalman filter can be applied to the bias correction of radar rain rate, especially for long and heavy storm events.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09a
• /
• pp.311-314
• /
• 2003

In radar tracking, since the sensor measures range, azimuth and elevation angle of a target, the measurement equation is nonlinear and the extended Kalman filter (EKF) is applied to nonlinear estimation. The conventional EKF has been widely used as a nonlinear filter for radar tracking, but the considerably large measurement error due to the linearization of nonlinear function in highly nonlinear situations may deteriorate the performance of the EKF. To solve this problem, a fuzzy-model-based Kalman filter (FMBKF) is proposed for radar tracking. The FMBKP uses a local model approximation based on a TS fuzzy model instead of a Jacobian matrix to linearize nonlinear measurement equation. The hybrid GA and RLS method is used to identify the premise and the consequent parameters and the rule numbers of this TS fuzzy model. In two-dimensional radar tracking problem, the proposed method is compared with the conventional EKF.

• Journal of Drive and Control
• /
• v.16 no.2
• /
• pp.22-29
• /
• 2019

This study presented a model predictive tracking control algorithm of autonomous truck based on object state estimation using extended Kalman filter. To design the model, the 1-layer laser scanner was used to estimate position and velocity of the object using extended Kalman filter. Based on these estimations, the desired linear path for object tracking was computed. The lateral and yaw angle errors were computed using the computed linear path and relative positions of the truck. The computed errors were used in the model predictive control algorithm to compute the optimal steering angle for object tracking. The performance evaluation was conducted on Matlab/Simulink environments using planar truck model and actual point data obtained from laser scanner. The evaluation results showed that the tracking control algorithm developed in this study can track the object reasonably based on the model predictive control algorithm based on the estimated states.

• Journal of Advanced Navigation Technology
• /
• v.15 no.4
• /
• pp.556-561
• /
• 2011

It is generally known that particle filters can produce consistent target tracking performance in comparison to the Kalman filter for non-linear and non-Gaussian systems. In this paper, I propose a Rao-Blackwellized multiple model particle filter(RBMMPF) to enhance computational efficiency of the particle filters as well as to reduce sensitivity of modeling. Despite that the Rao-Blackwellized particle filter needs less particles than general particle filter, it has a similar tracking performance with a less computational load. Comparison results for performance is listed for the using single sensor information RBMMPF and using multisensor data fusion RBMMPF.

• 전기의세계
• /
• v.31 no.2
• /
• pp.119-125
• /
• 1982

A new approach to the maneuvering target tracking problem is proposed. Its basic concept is to take the maneuver variable from the measurements. Tracking scheme based on the Kalman filter estimates the maneuver varieble from the residual and uses the estimates to update the Kalman filter. The estimation process is independent of target types and a model of the maneuver characteristics. All the filtering algorithms are processed in polor coordinate. Simulation results are presented and compared to that of the extended Kalman filter.

• Communications for Statistical Applications and Methods
• /
• v.18 no.1
• /
• pp.79-87
• /
• 2011

A spatial time series model was used for analyzing the method of spatial time series (not the ARIMA model that is popular for analyzing spatial time series) by using chicken pox data which is a highly contagious disease and grid data due to ARIMA not reflecting the spatial processes. Time series model contains a weighting matrix, because that spatial time series model influences the time variation as well as the spatial location. The weighting matrix reflects that the more geographically contiguous region has the higher spatial dependence. It is hypothesized that the weighting matrix gives neighboring areas the same influence in the study of the spatial time series model. Therefore, we try to present the conclusion with a weighting matrix in a way that gives the same weight to existing neighboring areas in the study of the suitability of the STARMA model, spatial time series model and STBL model, in the comparative study of the predictive power for statistical inference, and the results. Furthermore, through the Kalman-Filter method we try to show the superiority of the Kalman-Filter method through a parameter assumption and the processes of prediction.