• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.994-998
• /
• 1987

We calculated the expected length of jumper wires on MDF(Main Distribution Frame) in case of random jumper assignment, and from the calculated results we considered an optimal method of terminal arrangement and terminal expansion for keeping the length of jumper wires short, where MDF is a large frame-work installed in a telephone office for accommodating the terminals which are used for connecting the outside facilities to the inside facilities of the telephone office. We also showed the jumper saving effect in modular frames.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.981-982
• /
• 2006

In this study, the synthesis and semiconducting properties of cation and defect-doped KTaO3 film is reported. KTaO3is an important material for optoelectronic and tunable microwave applications. It is an incipient ferroelectric with a cubic structure that becomes ferroelectric when doped with Nb. the films were grown on (001) MgO single crystal substrates using pulsed-laser deposition. Semiconducting behavior is achieved by inducing oxygen vacancies in the KTaO3 lattice via growth in a hydrogen atmosphere. The resistivity of semiconducting KTaO3:Ca films was as low as 10cm, and n-type semiconducting behavior was indicated. Hall mobility and carrier concentration were 0.27 cm2/Vs and 3.21018cm-3.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.1265-1268
• /
• 2005

In this study, the synthesis and semiconducting properties of cation and defect-doped $KTaO_3$ film is reported. $KTaO_3$ is an important material for optoelectronic and tunable microwave applications. It is an incipient ferroelectric with a cubic structure that becomes ferroelectric when doped with Nb. While numerous studies have investigated the thin-film growth of semiconducting perovskites, little is reported about semiconducting $KTaO_3$ thin films. In this work, the films were grown on (001) MgO single crystal substrates using pulsed-laser deposition. Semiconducting behavior is achieved by inducing oxygen vacancies in the $KTaO_3$ lattice via growth in a hydrogen atmosphere. The resistivity of semiconducting $KTaO_3:Ca$ films was as low as 10cm, and n-type semiconducting behavior was indicated. Hall mobility and carrier concentration were $0.27cm^2/Vs$ and $3.21018cm^{-3}$, respectively. Crystallinity and microstructure of the $KTaO_3:Ca$ films were examined using X-ray diffraction and field-emission scanning microscopy.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.950-953
• /
• 1987

A wave difference method(WDH) phase detector for timing recovery is designed in the digital subscriber loop receiver. This paper describes the architecture and experimental results of the WDM, tankless timing extraction PLL. The results show that the designed WDM timing extraction circuit have stable jitter performance without the use of high precision LC tank circuit.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1008-1012
• /
• 1987

This paper describes the general approach to ISDN operation & maintenance. First we focused on the CCITT SG XVIII activities on the ISDN. As a general principles for operating and maintaining an ISDN they propose TMN(Telecommunication Management Network) concept which specifies several OM function modules and standard interfaces. Based on the concept we studied proper methodology to set up an efficient OM structure under the ISDN environments.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.981-985
• /
• 1987

In this paper, we predicted the quantities of ass output messages with the generalized estimation equation based on regression model. And, to know the generalization of equation, we measured the deviation of errors between the observed and the estimated values. As a result, the proposed equation applied to sample data showed linear characteristics in some cases.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.969-973
• /
• 1987

Ess provides the means to detect, control, and alleviate various system overload conditions. System overload occurs when excessive demands are made on any of the three basic system resources which are hardware, software, and real time. This paper describes the overload control strategy used in No.1A ESS and shows the system status according to traffic load.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.483-486
• /
• 1988

Link-by-link and end-to-end signaling affect the probability of inefficient trunk seizure, the usage of backward signal features, post dialing delay, total signal information processing load, each differently. Considering the circumtances of the domestic public switched telephone network, we conclude that end-to-end signaling is better suited to the domestic network.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.898-902
• /
• 1987

An end-to-end connect ion between customers on a network such as the PSTN (Public Switched Telephone Network) requires a number of internal connection ammong pieces of transmission, switching and signaling equipment. New switching, transmission, and station systems, as well as new features for existing systems, are continually being developed. and the complexities are such that ensuring compatibility of signaling arrange.ent is a major concern. In this paper, we propose that new signal interface using features of SPC(Stored Program Control) and digital transmission has to be introduced into the domestic telecommunications network in the near future.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.990-993
• /
• 1987

A digital subscriber loop transmission is a key technology to provide end-to-end digital connectivity for Integrated Service Network. And the equalization of the signal is needed for a fully digitalized connection between subscriber's premises because of the limited transmission characteristics of existing subscriber loop. This paper describes the switched capacitor equalizer for the 2B+D data transmission in TCH on existing subscriber loops.