• Aerospace Engineering and Technology
• /
• v.3 no.2
• /
• pp.91-97
• /
• 2004

In this paper, we conducted basic study on the reliability management that is a key factor to develop highly-reliable launch vehicles, and proposed the strategy for reliability management that can be applied to the KSLV program. Based on the analysis of international launch vehicles data, this paper also presented the reliability target that is essential for Korea's entering into the international commercial market.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.153-156
• /
• 2009

The pitch and yaw axis controls of Kick Motor, KLSV-I second propulsion system, was provided by the flexible seal that consists of alternate laminate of natural rubber and composite reinforcements between forward and aft ring. A hydrostatic actuating test has been conducted to evaluate a performance of the manufactured flexibke seal before it is assembled at the nozzle. Through the tests, we have verified an actuation torque and axial displacement of the flexible seal according to pressure variation. The actuation torque and axial displacement of all flexible seal is shown below 60kgf-m/deg at without pressure and 6mm at MEOP respectively.

• Aerospace Engineering and Technology
• /
• v.11 no.2
• /
• pp.208-215
• /
• 2012

The acoustic noise around a launch pad by launches of space launch vehicles was analyzed. The magnitudes of sound noise at some points near launch pad were predicted by locating the sound source at the exhaust jet plume of the rocket engine and considering several factors such as the directivity of the sound propagation and atmospheric attenuation. Specifically, the launch noise of Korea Space Launch Vehicle-I (KSLV-I) was estimated, and was compared to the actual measurement results. The analysis results proved to be heavily affected by the characteristics of directivity of sound propagation and the analysis showed good agreements with the measurements when the directivity of the sound was appropriately adjusted.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.5
• /
• pp.532-541
• /
• 2014

The ship-borne mobile down range telemetry antenna system having 4.6 m reflector antenna and 3-axis mounting structure at S-band requires the precise pointing accuracy at sea for the launch mission. Using the LEO satellites tracking, a method to determine and verify the antenna pointing and tracking performance, and to find the pointing bias which dominantly contributes to the pointing inaccuracy, is presented. Based upon the tests conducted on the Jeju sea and Pacific sea, the pointing bias is determined and its origin is also identified as the drift of the heading angle of the gyrocompass. The applied systematic correction taking into account the pointing bias, and the achieved improvement of the pointing accuracy are shown. Thanks to the correction, it is presented that this antenna tracked the launcher(KSLV-I) stably within the required pointing accuracy in the following KSLV-I third launch.

• Aerospace Engineering and Technology
• /
• v.6 no.1
• /
• pp.157-164
• /
• 2007

For a GPS antenna to normally receive GPS satellite signals during full flight mission of a satellite launch vehicle, it should be installed on skin of the vehicle. The surface of a launch vehicle is drastically heated up due to aerodynamic heating effect during flight, so that the GPS antenna mounted on surface of the launch vehicle is directly exposed to extremely hot temperature environment. Hot temperature test specification of the GPS antenna, therefore, is severer than inner components. This paper describes that procedures and results of performance analysis of the GPS antenna for KSLV-I under hot temperature environment. The GPS antenna was not deformed physically and inner LNA(Low Noise Amplifier) operated normally without performance degradation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.3
• /
• pp.213-220
• /
• 2010

This paper presents the analysis results of trajectory, performance and attitude control based on the first flight data of the KSLV-I. The KSLV-I had a fairing separation problem and failed to inject spacecraft into the orbit. In this paper, the trajectory, flight performance, and attitude control was analyzed considering the influence of unseparated fairing. Moreover, the flight results and performance of the inertial navigation and guidance system were presented. As a results of post-flight analysis, any other problem besides the fairing separation problem was not happened and onboard equipment functioned normally.

• Current Industrial and Technological Trends in Aerospace
• /
• v.6 no.2
• /
• pp.109-115
• /
• 2008

There would be a long-waited launch of a Korean space launch vehicle(KSLV-I) in NARO Space Center which is located in Goheung, Jeol La Nam Do in Korea. Korea would be the nineth country in the world which could launch space launch vehicle itself. The launch of the 2nd technology satellite of 100kg with KSLV-I would give Korean hope and dream. In addition to the traditional space activities of U.S.A. and Russia, Japan launched the lunar satellite, Kaguya in 2007, China launched the lunar satellite, Change and succeeded in space walk and India launched the lunar satellite Chandrayaan in October, 2008. In this paper we study on the trend of domestic and international development of space launch vehicle considering all these space development activities.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.3
• /
• pp.311-318
• /
• 2014

Electromagnetic compatibility(EMC) performance of the first Korea space launch vehicle(KSLV-I) should be ensured and verified in order to guarantee the normal operation among the spacecraft, ground facilities which are installed in the space center, and other wireless communication networks. For the purpose of the EMC performance verification, pertinent EMC test specifications, methods, and procedures for both the subsystems and the system should be established in consideration of operational properties and electromagnetic environmental effects. And it is required to maintain and control the EMC properties consistently in accordance with the determined specifications up to the program closing phase. In this paper, sequential management work conducted during the overall development process of the KSLV-I is explained, and not only the phased EMC test plan for each model of the KSLV-I and its subsystem but also test method, specification, and results of the verification tests are presented. And also, multipaction analysis results are presented.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.6
• /
• pp.27-33
• /
• 2014

2nd stage of KSLV-I, NaRo-Ho, performs CCAM not to collide with Naro Science Satellite. At that moment, the satellite should pass through the Plume Density area which was generated by KSLV-I KM residual thrust. Therefore, it is necessary to predict Plume Density field of KM residual thrust and guarantee the safety of the trajectory of payload. In this paper, DSMC method was used to simulate Plume Density by KM residual thrust and the simulation showed that the trajectory of Naro Science Satellite was safe.

• Aerospace Engineering and Technology
• /
• v.9 no.1
• /
• pp.50-59
• /
• 2010

In this paper, the alignment and navigation results by INGU(Inertial Navigation and Guidance Unit) onboard software and by Inertial Explorer which is a post-processing software specialized for IMU(Inertial Measurement Unit) are compared for identification of inertial sensor error models and estimation of alignment and navigation errors for KSLV-I INGU. For verification of the IMU error estimated by Kalman Filter of Inertial Explorer, the covariance parameters of inertial sensor error model state are identified by using stochastic error model of inertial sensors estimated by Allan variance and the alignment and navigation test with static condition and the land navigation test with dynamic condition are carried out. The validity of inertial sensor model for KSLV-I INGU is verified by comparison the alignment and navigation results of INGU on-board software and Inertial Explorer.