• International Journal of Concrete Structures and Materials
• /
• v.10 no.4
• /
• pp.407-424
• /
• 2016

This study tests ten full-size simple-supported beam specimens with the high-strength reinforcing steel bars (SD685 and SD785) using the four-point loading. The measured compressive strength of the concrete is in the range of 70-100 MPa. The main variable considered in the study is the shear-span to depth ratio. Based on the experimental data that include maximum shear crack width, residual shear crack width, angle of the main crack and shear drift ratio, a simplified equation are proposed to predict the shear deformation of the high-strength reinforced concrete (HSRC) beam member. Besides the post-earthquake damage assessment, these results can also be used to build the performance-based design for HSRC structures. And using the allowable shear stress at the peak maximum shear crack width of 0.4 and 1.0 mm to suggest the design formulas that can ensure service-ability (long-term loading) and reparability (short-term loading) for shear-critical HSRC beam members.

• Journal for History of Mathematics
• /
• v.25 no.3
• /
• pp.1-14
• /
• 2012

Since JiuZhang SuanShu(九章算術), the basic field of the traditional mathemtics in Eastern Asia is the field of rational numbers and hence irrational solutions of equations should be replaced by rational approximations. Thus approximate solutions of equations became a very important subject in theory of equations. We first investigate the history of approximate solutions in Chinese sources and then compare them with those in Chosun mathematics. The theory of approximate solutions in Chosun has been established in SanHakWonBon(算學原本) written by Park Yul(1621 - 1668) and JuSeoGwanGyun(籌書管見, 1718) by Cho Tae Gu(趙泰耉, 1660-1723). We show that unlike the Chinese counterpart, Park and Cho were concerned with errors of approximate solutions and tried to find better approximate solutions.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.1
• /
• pp.5-24
• /
• 2010

Data fusion is an attractive technology because it allows various trade-offs related to performance metrics, e.g., energy, latency, accuracy, fault-tolerance and security in wireless sensor networks (WSNs). Under a complicated environment, each sensor node must be equipped with more than one type of sensor module to monitor multi-targets, so that the complexity for the fusion process is increased due to the existence of various physical attributes. In this paper, we first investigate the process and performance of multi-attribute fusion in data gathering of WSNs, and then propose a self-adaptive threshold method to balance the different change rates of each attributive data. Furthermore, we present a method to measure the energy-conservation efficiency of multi-attribute fusion. Based on our proposed methods, we design a novel energy equilibrium routing method for WSNs, viz., multi-attribute fusion tree (MAFT). Simulation results demonstrate that MAFT achieves very good performance in terms of the network lifetime.

• Mycobiology
• /
• v.48 no.3
• /
• pp.219-227
• /
• 2020

Androgen-independent prostate cancer accounts for mortality in the world. In this study, various extracts of a medical fungus dubbed Ganoderma formosanum were screened for inhibition of DU145 cells, an androgen-independent prostate cancer cell line. Results demonstrated that both hexane (GF-EH) and butanol (GF-EB) fraction of G. formosanum ethanol extract inhibited DU145 cell viability in a dose-dependent manner. GF-EH induced cell-cycle arrest in G1 phase of DU145 cells via downregulation of cyclin E2 protein expression. In addition, GF-EB triggered extrinsic apoptosis of DU145 cells by activating caspase 3 gene expression resulting in programed cell death. Above all, both GF-EH and GF-EB show lower toxicity to normal human fibroblast cell line compared to DU145 cell, implying that they possess specific drug action on cancer cells. This study provides a molecular basis of G. formosanum extract as a potential ingredient for treatment of androgen-independent prostate cancer.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.5
• /
• pp.972-977
• /
• 2004

The hypoglycemic effect of an exo-biopolymer (EXO) and endo-biopolymer (ENDO) produced from submerged mycelial culture of Ganoderma lucidum was investigated in streptozotocin (STZ)-induced diabetic rats. Both the EXO and ENDO showed hypoglycemic potential, however, the former proved to be more potent than the latter. The administration of the EXO at the dose of 100 mg/kg body weight (BW) significantly reduced the plasma glucose level (23.5%) and increased the plasma insulin level (2.2 fold) in the diabetic animals. The EXO also lowered the plasma total cholesterol, triglyceride, low-density lipoprotein (LDL) cholesterol, and athrogenic index by 14.7, 31.4, 24.1, and 45.4%, respectively, and reduced the liver total cholesterol and triglyceride levels by 6.7 and 25.8%, respectively. It increased the plasma high-density lipoprotein (HDL) cholesterol (37.7%), compared to the control group. Furthermore, the alanine transaminase (ALT) and aspartate transaminase (AST) showed lower activities in the EXO administered groups than the other experimental groups. Taken together, these results suggest that the exo-biopolymer may alleviate the blood glucose level by increased insulin secretion.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.9
• /
• pp.1245-1253
• /
• 2014

One-step sulfuric acid saccharification of the red alga Pterocladiella capillacea was optimized, and various detoxification methods (neutralization, overliming, and electrodialysis) of the acid hydrolysate were evaluated for fermentation with the thermotolerant yeast Kluyveromyces marxianus. A proximate composition analysis indicated that P. capillacea was rich in carbohydrates. A significant galactose recovery of $81.1{\pm}5%$ was also achieved under the conditions of a 12% (w/v) biomass load, 5% (v/v) sulfuric acid, $121^{\circ}C$, and hydrolysis for 30 min. Among the various detoxification methods, electrodialysis was identified as the most suitable for fermentable sugar recovery and organic acid removal (100% reduction of formic and levulinic acids), even though it failed to reduce the amount of the inhibitor 5-HMF. As a result, K. marxianus fermentation with the electrodialyzed acid hydrolysate of P. capillacea resulted in the best ethanol levels and fermentation efficiency.

• Korean Journal of Child Studies
• /
• v.32 no.5
• /
• pp.135-150
• /
• 2011

The purpose of this study was to examine the interaction strategies used by typically developing boys and girls in their dealings with young children with ADHD in free play situations in inclusive classes. This was done in order to gain an in-depth understanding of the meaning of their interaction strategies. The subjects were 52 typically developing children (comprising 27 boys, 25 girls) and 3 young children with ADHD. The findings were as follows : First, the overall frequency of interaction strategies with the young children with ADHD was greater among the young female children (n = 372) than the young male children (n = 298). Second, when the utterance strategies of the male and female children were sub-categorized, both the male children (79.5%) and the female children (57.0%) mostly made use of avoidance strategies, one of the typical withdrawal strategies. Third, the interaction strategy of control represented 42.0 percent and as such was identified as the most prevalent interaction strategy utilized by the young male children studied. In the case of the young female children, obliging strategies were the most common interaction strategies representing 33.1 percent of the total used. In the light of the findings yielded from this study, some educational recommendations are provided.

• Journal of the Korean Society of Industry Convergence
• /
• v.19 no.3
• /
• pp.109-124
• /
• 2016

The objective of this paper is to find the density, stiffness, and strength of truss-wall diamond corrugation model combined with pinwheel truss inside space. The truss-wall diamond corrugation (TDC) model is defined as a unit cell coming from solid-wall diamond corrugation (SDC) model. Pinwheel truss-wall diamond corrugation (P-TDC) model is made by TDC connected with pinwheel structure inside of the space. Derived ideal solutions of P-TDC is based on truss-wall and pinwheel truss model at first. And then it is compared with Gibson-Ashby's ideal solution. To validate the ideal solutions of the P-TDC, ABAQUS software is used to predict the density, strength, and stiffness, and then each of them are compared to the ideal solution of Gibson-Ashby with a log-log scale. Applied material property is stainless steel 304 because of having cost effectiveness. Applied parameters for P-TDC are 1 thru 5 mm diameter within fixed opening width as 4mm. In conclusion, the relative Young's modulus and relative yield strength of the P-TDC unit model is reasonable matched to the ideal expectations of the Gibson-Ashby's theory. In nearby future, P-TDC model is hoped to be applied to make sandwich core structure by advanced technologies such as 3D printing skills.

• Journal of the Korean Society of Industry Convergence
• /
• v.19 no.3
• /
• pp.133-143
• /
• 2016

The objective in here is to find the density, stiffness, and strength of truss-wall rectangular (TWR) model which is combined with lattice truss (MLT) inside space. The TWR unit-cell model is defined as a unit cell originated from a solid-wall rectangular (SWR) model and it has an empty space inside. Thus, the empty space inside of the TWR is filled with lattice truss model defined as TWR-MLT. The ideal solutions derived of TWR-MLT are based on TWR with MLT model and it has developed by Gibson-Ashby's theory. To validate the ideal solutions of the TWR-MLT, ABAQUS software is applied to predict the density, strength, and stiffness, and then each of them are compared with the Gibson-Ashby's ideal solution as a log-log scale. Applied material property is stainless steel 304 because of cost effectiveness and easy to get around. For the analysis, SWR and TWR-MLT models are 1mm, 2mm, and 3mm truss diameter separately within a fixed 20mm opening width. In conclusion, the relative Young's modulus and relative yield strength of the TWR-MLT unit model is reasonably matched to the ideal expectations of the Gibson-Ashby's theory. In nearby future, TWR-MLT model can be verified by advanced technologies such as 3D printing skills.t.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.6
• /
• pp.2251-2270
• /
• 2015

More than 1 billion mobile apps (smartphone applications) have been released worldwide. Competition among developers of apps that are available in app stores has intensified because of increasing demand. App icons with an appealing design can instantly increase attention. Miryoku Engineering methods were used and combined with the Kansei interface model to examine the relationship between attractive icons and users. The evaluation grid method (EGM) is a qualitative method that was used to evaluate the icons, and Quantification Theory Type I is a quantitative method that was used to analyze the influence of design elements in icons. Eight attractive factors of app icons were determined using EGM, and six specific factors were identified using questionnaires. The quantitative results indicated that user cognition and emotion were influenced by the various design elements. The impact on the attractive factors of a single design element differed among users with diverse backgrounds. App icons were assessed on the basis of aesthetics to identify attractive factors and thereby assist designers in understanding and implementing design elements and improving the overall visual appeal of their apps. The result of this investigation is crucial to the presentation of app icons in online app stores.