• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권2호
• /
• pp.593-607
• /
• 2016

This paper analyzes interference alignment in the two-way relay network with compute-and-forward in both single relay and multiple relays networks. The advantages of compute-and-forward over other relaying strategies are that it can relay only linear combinations of the useful signals and remove the noise. The algorithm proposed in this paper adopts the criterion of maximum SINR to derive the pre-coding matrix. The experimental results show that the performance of interference alignment in two-way relay channel via compute-and-forward is better than that of amplify-and-forward, and the total sum rate in the two-way multiple relay networks is larger than that in the two-way single relay networks.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.651-652
• /
• 2006

In this paper, 4-way data path 128 point pipelined FFT processor with 4-way structure is proposed. The proposed FFT processor has 4-way structure in order to meet data requirement of MB-OFDM system at 132MHz operating frequency. The FFT processor is based on R4MDC and extended to suit 4-way data path. The FFT processor is designed by Verilog HDL and the gate count is about 88k.

• 대한기계학회논문집A
• /
• 제41권11호
• /
• pp.1077-1084
• /
• 2017

기존의 선박용 디젤 엔진에는 항상 일정한 엔진 부하량을 유지하는 캠 구동장치가 적용되고 있었으나, 최근 환경규제로 인하여 엔진 부하량에 따라 실린더 온도를 개별적으로 제어하는 LDCL(Load dependent cylinder liner) JWCS(Jacket water cooling system)가 적용된 전자유압 제어방식이 개발되었다. 이 시스템에서 3-way 밸브는 실린더의 상부와 하부와의 온도 차이를 줄여 저온부식을 방지하는데, 대부분 수입에 의존하고 있으며 토출유량이 낮다. 이에 본 연구에서는 3-way 밸브 내부 형상 관련 설계인자가 성능(토출 유량 및 온도)에 미치는 영향을 파악하여 밸브의 형상 설계를 수행하였으며, 기존 모델과의 성능 비교를 통해 제안된 밸브의 우수성을 검증하였다.

• 설비공학논문집
• /
• 제19권3호
• /
• pp.269-274
• /
• 2007

A 3-way valve has been applied to a distributor in a hot-water heating system and the performance of the system was evaluated in view of the variations of pressure drop and flow rate. The 3-way valve has been designed to bypass overplus hot-water when a control valve is closed. Note that the flow goes through heating pipeline in normal operation. In the present study, the measured pressure drops in each part of the flow paths show that the contribution to the total pressure drop is in the order of the supply header with control valves, piping system of each room and return header of the distributor, even though the amount of it is different according to the flow paths. As a result of performance test by sequential closing of the control valves, the variations of pressure drop and flow rate in the distributor with 3-way valves is much lower than those with previous 2-way valves, which prevent noises induced by pressure fluctuations.

• Journal of Mechanical Science and Technology
• /
• 제20권7호
• /
• pp.941-949
• /
• 2006

Nonlinear behavior analysis was used to verify whether a one-way clutch is effective for reducing the torsional vibration of a paired spur gear system under periodic excitation. The dynamic responses were studied over a wide frequency range by speed sweeping to check the nonlinear behavior using numerical integration. The gear system with a one-way clutch showed typical nonlinear behavior. The oscillating component of the dynamic transmission error was reduced over the entire frequency range compared to a system without a one-way clutch. The one-way clutch also eliminated unsteady continuous jump phenomena over multiple solution bands, and prevented double-side contact, even with very small backlash. Installing a one-way clutch on both sides of the gear system was more effective at mitigating the negative effects of external periodic excitation and various parameter changes than a conventional gear system without a one-way clutch.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1355-1359
• /
• 2004

The two way subscriber transmission systems have tendency to spread its carrier frequency bandwidth or information bit rate and average bit error rate according to popularization of high speed information through the digital communication system, transmission medium and the Internet. This fact is an important incentive to realize new systems. These two way subscriber transmission systems usually use same cable or same carrier frequency bandwidth for up stream channel and down stream channel. In the systems, the disturbances of noise, crosstalk or fading affect the characteristics. Specifically, these disturbances cause the decrease of information bit rate and degradation of transmission quality. This paper proposes the improved method of their degradations using the particular feature of two way subscriber transmission systems and it makes clear proposed method is effective by theoretically and some numerical examples.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.403-404
• /
• 2008

In this paper, a new 4-way search window is developed for H.264 Motion Estimation(ME) to improve the memory bandwidth. The proposed 4-way(up, down, left, right) search window could improve the reuse of overlapped window data to reduce the redundancy access factor by 1.4, though the 1/3-way search window requires $7.7{\sim}11$ times of data retrieval redundantly. In experiments, the new implementation of 4-way search window on Altera Stratix-III could deal with CIF ($352{\times}288$) video of 3 reference frame, $48{\times}48$ search area and $16{\times}16$ macroblock by 30fps real time at 55.2MHz.

• Bulletin of the Korean Chemical Society
• /
• 제30권5호
• /
• pp.1107-1112
• /
• 2009

The aim of this study is to develop and synthesize $5-HT_{1A}$ receptor imaging agents with WAY-100635 moiety and $^{99m}Tc(CO)_3$ core. WAY-100635 is commonly known as $5-HT_{1A}$ antagonist and its labeled compound ([$^{11}C$] WAY-100635) has been used as effective radioligand for imaging brain $5-HT_{1A}$ receptors with PET(Positron Emission Tomography). However, there are several restrictions in using a radioisotope of C-11 and requires for more effective radioisotopes and ligands. In order to produce a structure most similar to WAY-100635, WAY-100635 derivatives containing a cysteine chelator were designed and confirmed by using in silico (Hyperchem). The novel compounds (7a, 7b, 7c) were prepared in five or 7 steps with yields of 16%, 36% and 42%, respectively and radiolabeled with $[^{99m}Tc(CO)_3(H_2O)_3]^{+}$. The labeling yield was 99% for all the newly synthesized compounds. [$^{99m}Tc(CO)_3$]- WAY-100635 derivatives show a neutral charge which were confirmed by paper electrophoresis.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권10호
• /
• pp.4223-4228
• /
• 2015

Objective: To investigate the diagnostic value of the R-way colposcopic evaluation system (R-way system) in cervical cancer screening. Materials and Methods: Between August 2013 and August 2014, a total of 1,059 cases referred to colposcopy in Peking University First Hospital were studied using both the R-way system and conventional colposcopy. Our study evaluated and compared the diagnostic ability of the two methods in detecting high-grade lesions and cervical cancer (hereinafter called CIN2+). Evaluation indicators including sensitivity, specificity, positive predictive value (PPV), negative predictive value (NPV), Youden index and the area under the curve (AUC) of the receiver operating characteristic (ROC) were calculated. Results: The R-way system had a slightly lower specificity (94.5%) than conventional colposcopy (96.0%) for CIN2+ detection (P=0.181). However, the sensitivity (77.8%) was significantly higher than with the conventional colposcopic method (46.6%) (${\chi}^2=64.351$, P<0.001). In addition, the AUC of the ROC for CIN2+ detection using the R-way system (0.839) was larger than that with conventional colposcopy (0.731) (Z=4.348, P<0.001). If preliminary result had been drawn from cervical exfoliated cytology before colposcopy referral, combination of the R-way system with cytology could increase the sensitivity to 93.9% for CIN2+ detection (excluding ASCUS\LSIL), confirmed by multipoint biopsy or ECC. Conclusions: The diagnostic value of the R-way evaluation system is higher than that of conventional colposcopic evaluation in cervical cancer screening. Moreover, taking the ease of use and standardized quality control management into account, the R-way system is highly preferable.

• 한국의류산업학회지
• /
• 제20권1호
• /
• pp.83-92
• /
• 2018

This paper investigated garment formability and fabric mechanical properties of one-way and two-way stretch fabrics according to the thermal treatment methods. One-way and two-way stretch fabrics were woven using 75d and 150d PET/spandex covering yarns and then these were wet thermal treated with four kinds of finishing machines. The fabric mechanical properties of these stretch fabrics specimens were measured and compared with the regular PET fabrics. The stretch ratio of one-way stretch fabric was ranged 12 to 26 percentage, 15 to 45 percentage for 2-way stretch fabrics and 4 to 10 percentage for regular fabrics. Garment formability of stretch fabric was superior than that of regular fabrics, in addition, 2-way stretch fabric was better than one-way. The garment formability of the stretch fabrics treated with CPB and Lava wet thermal machines showed the highest values, and the stretch ratio of these 2-way stretch fabrics was also the highest, which was ranged 20 to 45 percentage. This phenomenon was assumed to be due to high extensibility and bending rigidity with low shear modulus of the 2-way stretch fabric treated with CPB and Lava wet thermal machines. It was shown that the garment formability of stretch fabrics treated without dry thermal treatment was higher than that of dry thermal treated fabrics. It revealed that high stretch fabric was available under the condition of low process tension in the wet and dry thermal treatments of the finishing process, which makes high garment formability.