• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.593-596
• /
• 2003

A proposed way to prepare $YBa_2Cu_3O_y$ wires or tapes is that Ag is used as substrate and melting point of $YBa_2Cu_3O_y$ is decreased to lower than the melting point of silver ($961\;^{\circ}C$). Therefore after the deposition of $YBa_2Cu_3O_y$ film on Ag substrate, the heat treatment can be carried out below the Ag melting point. Silver (Ag) and Lead oxide(PbO) were selected to be additives for $YBa_2Cu_3O_y$. Different Ag and PbO contents were added in $YBa_2Cu_3O_y$, the melting points of which were measured by DTA. In order to guarantee that the superconductivity of $YBa_2Cu_3O_y$ was not reduced after Ag and PbO added into $YBa_2Cu_3O_y$, their superconductivities were measured. It is proved that as additives, both Ag and PbO can reduce the melting point of $YBa_2Cu_3O_y$. For Ag doped $YBa_2Cu_3O_y$, $T_c$ is about 93K and ${\Delta}Tc$ is $2{\sim}3K$. For PbO doped $YBa_2Cu_3O_y$, $T_c$ is $88K{\sim}92K$ and ${\Delta}T_c$ is $11{\sim}12K$. When 10 wt% of Ag and 10 wt% PbO were added in $YBa_2Cu_3O_y$, the melting point of the mixture of $YBa_2Cu_3O_y$ (80 wt%), Ag (10 wt%) and PbO (l0 wt%) is $943^{\circ}C$. The transition temperatures ($T_c$) of the sample is 91.8 K.

• Journal of Korean Society on Water Environment
• /
• v.33 no.1
• /
• pp.78-89
• /
• 2017

Water quality monitoring network data is being affected continuously due to non-point source pollution arising from agricultural land located on the Gwangsancheon outlet in the Nakdong River basin. In this study, we have performed analysis of water quality monitoring system, water quality pattern using SOM and water quality in the Gwangsancheon for sub-basin located at Gisan-myeon in the Nakdong River basin. We have developed and applied the model to estimate the runoff and non-point source loading. As a result of SOM pattern, the effect of non-point source pollution was the largest in the paddy fields and fields. As a result of the developed model, we found contribution rate and reduction rate for non-point source loading according to change of landuse because the reduction effect of nonpoint pollutants was 20.9% of SS, 9.9% of TN, 21.2% of TP and 8.9% of TOC depending on the landuse change.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.2
• /
• pp.123-130
• /
• 2016

With the development of fast construction mode in shipbuilding market, the demand on accuracy management of hull is becoming higher and higher in shipbuilding industry. In order to enhance production efficiency and reduce manufacturing cycle time in shipbuilding industry, it is important for shipyards to have the accuracy of ship components evaluated efficiently during the whole manufacturing cycle time. In accurate shipbuilding process, block accuracy is the key part, which has significant meaning in shortening the period of shipbuilding process, decreasing cost and improving the quality of ship. The key of block accuracy control is to create a integrate block accuracy controlling system, which makes great sense in implementing comprehensive accuracy controlling, increasing block accuracy, standardization of proceeding of accuracy controlling, realizing "zero-defect transferring" and advancing non-allowance shipbuilding. Generally, managers of accuracy control measure the vital points at section surface of block by using the heavy total station, which is inconvenient and time-consuming for measurement of vital points. In this paper, a new measurement method based on point clouds technique has been proposed. This method is to measure the 3D coordinates values of vital points at section surface of block by using 3D scanner, and then compare the measured point with design point based on ICP algorithm which has an allowable error check process that makes sure that whether or not the error between design point and measured point is within the margin of error.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.3
• /
• pp.68-81
• /
• 2014

This study aims to apply and evaluate the automatic DAD analysis method, which is able to establish the depth-area relationship more efficiently and accurately for point-to-areal rainfall conversion. First, the proposed automatic DAD analysis method tracks the expansion route of area from the storm center, and it is divided into Box-tracking, Point-tracking, Advanced point-tracking according to tracking method. After applying the proposed methods to 10 events occurred in Yongdam-watershed area, we confirmed that the Advanced point-tracking method makes it possible to estimate the maximum average areal rainfal(MAAR) more accurately with consideration of the storm movement and the multi-centered storm. In addition, Advanced point-tracking could reduce the errors of the estimated MAAR induced by increasing the area because it can estimate MAAR for each storm center and compare them at the same time. Finally, the DAD curve for the study area could be derived based on the DAD analysis of the selected 10 events.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.1
• /
• pp.66-74
• /
• 2018

In order to evaluate the precision degree of the blocks on the dock, the shipyards recently started to use the point cloud approaches using the 3D scanners. However, they hesitate to use it due to the limited time, cost, and elaborative effects for the post-works. Although it is somewhat traditional instead, they have still used the electro-optical wave devices which have a characteristic of having less dense point set (usually 1 point per meter) around the contact section of two blocks. This paper tried to expand the usage of point sets. Our approach can estimate the rework time to weld between the Pre-Erected(PE) Block and Erected(ER) block as well as the precision of block construction. In detail, two algorithms were applied to increase the efficiency of estimation process. The first one is K-mean clustering algorithm which is used to separate only the related contact point set from others not related with welding sections. The second one is the Concave hull algorithm which also separates the inner point of the contact section used for the delayed outfitting and stiffeners section, and constructs the concave outline of contact section as the primary objects to estimate the rework time of welding. The main purpose of this paper is that the rework cost for welding is able to be obtained easily and precisely with the defective point set. The point set on the blocks' outline are challenging to get the approximated mathematical curves, owing to the lots of orthogonal parts and lack of number of point. To solve this problems we compared the Radial based function-Multi-Layer(RBF-ML) and Akima interpolation method. Collecting the proposed methods, the paper suggested the noble point matching method for minimizing the rework time of block-welding on the dock, differently the previous approach which had paid the attention of only the degree of accuracy.

• The Korean Journal of Emergency Medical Services
• /
• v.12 no.3
• /
• pp.17-26
• /
• 2008

Purpose : This study aimed to make comparison before and after CPR training for health college students (departments of visual optics, occupational therapy, and health welfare administration). The questionnaire consisted of self-efficacy, knowledge, and attitudes toward CPR affect performance ability. Through this study, the researchers tried to provide basic data in developing of cardiopulmonary resuscitation training programs and training methods for health college students. Methods : This study was applied to 83 health college students (departments of visual optics, occupational therapy, and health welfare administration) in G Province. Data were collected from September 22 to October 9, 2008. Analysis was performed by using SPSS WIN 12.0 Version program. Frequency analysis, t-test, ANOVA, and Pearson's correlation coefficients were used. Statistical significance was based on p < .05. Results : 1. There was an increase with(${\rightarrow}$ in) 1.69 point before education and 3.01 after education of artificial ventilation(p < .001). There was an increase in 1.46 point before education and 3.24 after education of airway(p < .001). There was an increase in 1.54 point before education and 2.84 after education of chest compression location(p < .001). There was an increase in 1.97 point before education and 3.13 after education of chest compression(p < .001). 2. The difference between self-efficacy, knowledge, and attitude before and after CPR education, the self-efficacy increased from 2.08 point before education(p < .001 to 3.18 point after education. Knowledge increased from 2.09 point before education(p < .001) to 3.28 point after education. Attitude increased from 1.75 point before education(p < .001 to 3.05 point after education. 3. The correlation between self-efficacy, knowledge, and attitude toward CPR), was not changed before education. After education, knowledge showed quantitative correlation(r = .219, p < .05) with attitude. 4. In regression analysis with the aim of examining influence of self-efficacy, knowledge, and attitude upon performance ability, the effect wasn't given to performance ability before education. After education, the self-efficacy was indicated to have significant effect on performance ability(p < .05).

• Journal of Acupuncture Research
• /
• v.20 no.1
• /
• pp.13-21
• /
• 2003

Objective : The aim of this research was to investigate the depressive effect of acupuncture on Dong and depletion on Fungchi-point(G20) in stroke patients. Methods : We measured the blood pressure of the patients who were admitted in the Oriental Medical hospital of Dongeui medical center from 21. Dec. 2001. to 2. Oct. 2002. 41 stroke patients were devided into two groups. 15 patients were treated by acupuncture on Dong. The other 26 patients were treated by depletion on Fungchi-point(G20). The activity of daily living was measured. If systolic blood pressure was over 160 mmHg or diastolic blood pressure was over 90mmHg, acupuncture on Dong and depletion on Fungchi-point(G20) were performed. Then 30 minutes and 60 minutes later, systolic. diastolic blood pressure and pulse rates were measured. Results : After 30 minute of treatment, both acupuncture on Dong and depletion on Fungchi-point(G20) significantly depressed systolic blood pressure and diastolic blood pressure. After 60 minute of treatment, both acupuncture on Dong and depletion on Fungchi-point(G20) were significant in depressing systolic blood pressure and diastolic blood pressure. Pulse rates significantly changed in depletion on Fungchi-point(G20) but did not significantly change in acupuncture on Dong. Conclusions: These results suggest that both acupuncture on Dong and depletion on Fungchi-point(G20) are effective in depressing systolic blood pressure and diastolic blood pressure.

• Proceedings of the KOSOMBE Conference
• /
• v.1991 no.05
• /
• pp.51-55
• /
• 1991

This paper describes an algorithm of pattern analysis of ECG signals by significant points extraction method. The significant points can be extracted by modified zerocrossing method, which method determines the real significant point among the significant point candidates by zerocrossing method and slope rate of left side and right side. This modified zerocrossing method improves the accuracy of detection of real significant point position. This paper also describes the pattern matching algorithm by a hierarchical AND/OR graph of ECG signals. The decomposition of ECG signals by a hierarchical AND/OR graph can make the pattern matching process easy and fast. Furthermore the pattern matching to the significant points reduces the processing time of ECG analysis.

• Proceedings of the KIEE Conference
• /
• 1997.07f
• /
• pp.2262-2264
• /
• 1997

In this paper, Maximum Power Point Tracking Method using Fuzzy controller is proposed to improve energy conversion efficiency. The solar cell has an optimum operating point to be able to get maximum power. To obtain maximum power from photovoltatic any, photovoltatic power system usually requires maximum power point tracking controller. The output characteristics of solar cell are nonlinear. To obtain maximum power from photsvoltatic array, the fuzzy controller only uses the output power. Therefore this control method is easy to implement to real system.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1994.04a
• /
• pp.95-102
• /
• 1994

A path-switching strategy by combining the use of generalized inverse and line search is proposed. A reliable predictor for the tangent vector to bifurcation path is first computed by using the generalized inverse approach. A line search in the direction of maximum gradient of total potential at the point of intersection between the above predictor and a constant loading plane introduced in the vicinity of the detected bifurcation point is then carried out for the purpose of obtaining an improved approximation for a point on bifurcation path. With this approximation obtained, an actual point on bifurcation path is then computed through iteration on the constant loading plane.