• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.957-960
• /
• 2009

Sensor applications of thin-film transistors (TFTs), such as photosensor, magnetic sensor, temperature sensor and chemical sensor, are introduced. Active-matrix circuits and amplifying circuits using poly-Si TFTs are integrated with these sensors to improve sensor performances and generate additional functions. These sensors may be promising applications after flat-panel displays (FPDs) in giant-micro electronics.

• Progress in Superconductivity and Cryogenics
• /
• v.20 no.2
• /
• pp.34-39
• /
• 2018

A cryogenic cooling system is designed for a 154 kV/ 2 kA three-phase hybrid type superconducting fault current limiter (SFCL). The superconducting modules of the SFCL have the operating condition of 71 K at 500 kPa. The total heat load of the SFCL including the cooling system is estimated at 9.6 kW. The cooling system of the closed loop is configured to meet the operating condition, depending on cooling methods of forced flow cooling and re-liquefaction cooling. The cooling system is composed of three cryostats with superconducting modules, cryocoolers, liquid nitrogen circulation pumps, a subcooler and a pressure builder. The basic cooling concept is to circulate liquid nitrogen between three SFCL cryostats and the cryocooler, while maintaining the operating pressure. The design criterion for the cooling system is based on the operation results of the cooling system for a 154 kV/2 kA single-phase hybrid SFCL. The specifications of system components including the piping system are determined according to the design criterion.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.2
• /
• pp.171-176
• /
• 2016

In this paper, the integration of the firing test stages at the acceptance test of the propelling charge has been studied using statistical analysis on the basis of the test data of K676 and K677 propelling charge for K9 self propelled howitzer. Acceptance test of K676 / K677 propelling charge consists of 3 stages and each stage is charge assessment test, charge uniformity test and charge proving ground test. Many of rounds are fired and much money is spent to prove the charge performance at each stage. The result of t-test shows that there is no difference between charge uniformity and charge proving ground test stage of K676 and K677 propelling charge.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2103-2105
• /
• 2005

Metal film type of resistor have been tested to invest maximum usable power at the pulsed high voltage and pulsed high current. Experiments were carried out using capacitor charging power supply and dump switch. Pulsed amplitude were varied from 1kV to 25kV. The peak current reached was 1kA. Datasheet are given for the limited pulsed power and energy for metal film type of resistor in nanosecond and microsecond time range. The experimental investigation of the threshold loading of the resistor in the high current and voltage pulsed mode has shown that the process of destruction of resistor has specific features for each mode. The mechanisms of failure and destruction of resistors under action of high-voltage and high-current pulses are discussed.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2271-2273
• /
• 2003

Control Rod Control System(CRCS) is to control nuclear reaction of reactor by moving Control Rod Drive Mechanism(CRDM) with speed and direction signal from Reactor Regulating System(RRS). CRCS is made up of two parts : control cabinet and power cabinet. And this paper presents mainly power cabinet design for system reliability. To increase reliability of power cabinet, controller, power supply and communication line arc doubly designed and supervision and diagnosis function are applied.

• The Korea Genome Conference
• /
• 2006.09a
• /
• pp.27-27
• /
• 2006

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2006.10a
• /
• pp.125-134
• /
• 2006

Process & mechanism $\blacklozenge$ The process consists from two steps which are laser processing step and separation steop. $\blacklozenge$ The wavelength of laser beam is transmissible wavelength for the wafer. However, inside of Si wafer is processed due to temperature dependence of optical absorption coefficient Advantage & Application $\blacklozenge$ Advantages are high speed dicing, no debris contaminants, completely dry process, etc. $\blacklozenge$ The cutting edges were fine, The lifetime and endurances did not degrade the device characteristics $\blacklozenge$ A separation of a wafer with DAF was introduced as an application for SiP

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.80-82
• /
• 1996

This paper deals with the effects of the volume of thermal expansion chamber on the interrupting performance in thermal expansion type 25.8kV 25kA gas circuit breaker. Model interrupters with 5 type thermal expansion chamber were designed and manufactured. Short-circuit tests were carried out for those model interrupters with 25kA breaking current. Pressure rise in the expansion chamber were measured and compared with the calculated one which was obtained from a self-developed program in our team. The analysis on the interrupting performance of each model interrupter has been done on the base of the short-circuit test results.

• The Bulletin of The Korean Astronomical Society
• /
• v.25 no.2
• /
• pp.113-113
• /
• 2000

• Proceedings of the Korean Society of Life Science Conference
• /
• 2005.09a
• /
• pp.75-75
• /
• 2005