• Journal of Yeungnam Medical Science
• /
• v.6 no.1
• /
• pp.59-68
• /
• 1989

Ceftizoxime sodium is a new synthetic ${\beta}$-lactam antibiotic combining potent antibacterial activity with high stability to a wide range of bacterial ${\beta}$-lactamase. This experiment was achieved to evaluate the antibacterial activities of ceftizoxime sodium againist Gram negative enteric bacteria isolated from in outpatient visiting Yeungnam university hospital and to study the emergence of drug induced bacterial varients which resist to ceftizoxime in vitro. The antibacterial activity of the ceftizoxime was compared with that of antibiotics and its effect on population of normal intestinal flora in mice was observed. The results are summarized as follows : 1. Highly effective antibacterial activity of ceftizoxime against Gram negative enteric bacilli was demonstrated and this antibacterial activity was superior to that of ampicillin. 2. Several test strains shows multiple antibiotic resistence. Among 15 strains of Escherichia coli, 1 strain was resistent to ampicillin, cefadroxyl, gentamicin, tetracycline, and 2 strains were resistent to ampicillin, cefadroxyl, tetracycline, five strains of Escherichia coli and Enterobacter cloacae was resistent to amplicillin, tetracycline and Shigella dysenteria was resistent to ampicillin, gentamicin, tetracycline. 3. The frequency of in vitro emergence of resistent varients among ceftizoxime sensitive bacteria in the presence of increasing concentrations of the compound was found to be low. 4. Plasmid was isolated in 6 of 9 strains (6 strains of Escherichia coli, Shigella dysenteriae, Enterobacter cloaceae and Salmonella typhi) That showed different antibiotic resistance. They were 5 strains of Escherichia coli and 1 strain of Shigella dysenteriae. However, plasmid could not be considered as a hallmark for antibiotic resistance by this. Further studies with curing experiment are to be accomplished for this purpose. 5. Changes in the bacterial count of normal intestinal flora following 25mg/kg/day administration of ceftizoxime over S consecutive days were not significant. In conclusion, ceftizoxime appeared to be a drug of choice in the treatment of Gram negative enteric bacilli infection.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.7 no.1
• /
• pp.40-47
• /
• 2004

Purpose: A new classification of gastrointestinal food allergy was published, but the changes of terminology between previously reported terms and the new ones were in a state of disorder. This has resulted in confusion between medical communication and diagnostic and therapeutic approaches. The clinical observations of infants presenting with gastrointestinal cow milk allergy (GI-CMA) were performed, and the changes in the terminology reviewed through the published Korean literature. Methods: Between March 2003 and July 2003, data from 37 consecutive infants with GI-CMA, aged 2 weeks to 15 months, were reviewed. The challenge and elimination test of cow milk, and the endoscopic and histologic findings, were used for the seven subdivisions of GI-CMA according to a new classification on the basis of patients' ages, clinical manifestations and location of gastrointestinal lesions. Results: The 37 patients had a mean age of $5.4{\pm}4.8$ months, with those observed in 26 (70.3%) of patients being below 6 months of age. The seven final diagnoses were; cow milk protein-induced enterocolitis (CMPIE) in 12 (32.4%), cow milk protein proctitis (PROC) in 12 (32.4%), IgE-mediated (IGE) in 6 (16.2%), gastroesophageal reflux-associated cow milk allergy (GERA) in 5 (13.5%) and eosinophilic gastroenterocolitis in 2 (5.4%). CMPIE was revealed as the typical type in 7 (18.9%) and the atypical type in 5 (13.5%), and all of typical CMPIE revealed cow milk protein-induced enteropathy. The mean age at symptom onset was $4.3{\pm}0.8$ months, and for those with typical and atypical CMPIE, and PROC and GERA were $3.8{\pm}4.6$, $10.4{\pm}3.8$, $3.4{\pm}3.9$ and $7.8{\pm}5.7$ months, respectively (p<0.05). The period from onset of symptom to diagnosis was $2.4{\pm}3.3$ (0.5~12) months, with those observed in atypical CMPIE and GERA being over 3months. Although the birth weights in all patients were within the 10~90 percentile range, the body weights on diagnoses were below the 3 percentile in 48.6%; IGE 16.7%, EOS 0%, typical CMPIE 85.7%, atypical CMPIE 60.0%, PROC 25.0% and GERA 100% (p<0.05). Through the review of the Korean literature, 8 case reports and 14 original articles for GI-CMA were found. Conclusion: GI-CMA is not a rare clinical disorder and is subdivided into seven categories on the basis of the patient's age, clinical manifestations and location of the gastrointestinal lesions. The terms for GI-CMA are changing with new classifications, and careful approaches are necessary for medical communications.

• Journal of Global Scholars of Marketing Science
• /
• v.18 no.4
• /
• pp.119-155
• /
• 2008

Customer Relationship Management(CRM) has been a sustainable competitive edge of many companies. CRM analyzes customer data for designing and executing targeted marketing analysing customer behavior in order to make decisions relating to products and services including management information system. It is critical for companies to get and maintain profitable customers. How to manage relationships with customers effectively has become an important issue for both academicians and practitioners in recent years. However, the existing academic literature and the practical applications of customer relationship management(CRM) strategies have been focused on the technical process and organizational structure about the implementation of CRM. These limited focus on CRM lead to the result of numerous reports of failed implementations of various types of CRM projects. Many of these failures are also related to the absence of marketing approach. Identifying successful factors and outcomes focused on marketing concept before introducing a CRM project are a pre-implementation requirements. Many researchers have attempted to find the factors that contribute to the success of CRM. However, these research have some limitations in terms of marketing approach without explaining how the marketing based factors contribute to the CRM success. An understanding of how to manage relationship with crucial customers effectively based marketing approach has become an important topic for both academicians and practitioners. However, the existing papers did not provide a clear antecedent and outcomes factors focused on marketing approach. This paper attempt to validate whether or not such various marketing factors would impact on relational quality and CRM performance in terms of marketing oriented perceptivity. More specifically, marketing oriented factors involving market orientation, customer orientation, customer information orientation, and core customer orientation can influence relationship quality(satisfaction and trust) and CRM outcome(customer retention and customer share). Another major goals of this research are to identify the effect of relationship quality on CRM outcomes consisted of customer retention and share to show the relationship strength between two factors. Based on meta analysis for conventional studies, I can construct the following research model. An empirical study was undertaken to test the hypotheses with data from various companies. Multiple regression analysis and t-test were employed to test the hypotheses. The reliability and validity of our measurements were tested by using Cronbach's alpha coefficient and principal factor analysis respectively, and seven hypotheses were tested through performing correlation test and multiple regression analysis. The first key outcome is a theoretically and empirically sound CRM factors(marketing orientation, customer orientation, customer information orientation, and core customer orientation.) in the perceptive of marketing. The intensification of ${\beta}$coefficient among antecedents factors in terms of marketing was not same. In particular, The effects on customer trust of marketing based CRM antecedents were significantly confirmed excluding core customer orientation. It was notable that the direct effects of core customer orientation on customer trust were not exist. This means that customer trust which is firmly formed by long term tasks will not be directly linked to the core customer orientation. the enduring management concerned with this interactions is probably more important for the successful implementation of CRM. The second key result is that the implementation and operation of successful CRM process in terms of marketing approach have a strong positive association with both relationship quality(customer trust/customer satisfaction) and CRM performance(customer retention and customer possession). The final key fact that relationship quality has a strong positive effect on customer retention and customer share confirms that improvements in customer satisfaction and trust improve accessibility to customers, provide more consistent service and ensure value-for-money within the front office which result in growth of customer retention and customer share. Particularly, customer satisfaction and trust which is main components of relationship quality are found to be positively related to the customer retention and customer share. Interactive managements of these main variables play key roles in connecting the successful antecedent of CRM with final outcome involving customer retention and share. Based on research results, This paper suggest managerial implications concerned with constructions and executions of CRM focusing on the marketing perceptivity. I can conclude in general the CRM can be achieved by the recognition of antecedents and outcomes based on marketing concept. The implementation of marketing concept oriented CRM will be connected with finding out about customers' purchasing habits, opinions and preferences profiling individuals and groups to market more effectively and increase sales changing the way you operate to improve customer service and marketing. Benefiting from CRM is not just a question of investing the right software, but adapt CRM users to the concept of marketing including marketing orientation, customer orientation, and customer information orientation. No one deny that CRM is a process or methodology used to develop stronger relationships being composed of many technological components, but thinking about CRM in primarily technological terms is a big mistake. We can infer from this paper that the more useful way to think and implement about CRM is as a process that will help bring together lots of pieces of marketing concept about customers, marketing effectiveness, and market trends. Finally, a real situation we conducted our research may enable academics and practitioners to understand the antecedents and outcomes in the perceptive of marketing more clearly.

• Radiation Oncology Journal
• /
• v.22 no.2
• /
• pp.106-114
• /
• 2004

Purpose : This study was done to evaluate xerostomia fellowing intensity modulated radiotherapy for patients with head and neck cancer, and to analyze the correlation between the dosimetric parameters and xerostomia parameters. Materials and Methods : From February till October 2003, 13 patients with 3 months of follow-up were evaluated for xerostomia after being treated for head and neck cancer with IMRT. Their median age was 57 years(range: 43$\~$77). Xerostomia were assessed with a 4-question xerostomia questionnaire score (XQS) and a test for salivary flow rates (unstimulated and stimulated). The patients were also given a validated LENT SOMA scale (LSC) questionnaire. The evaluations were completed before radiation therapy (pre-RT) and at 1 and, 3 months after radiation therapy (RT). We evaluated xerostomia at pre-RT, 1 and, 3 months after RT. The association between the xerostomia parameters (XQS and LSC) and salivary flow rates (unstimulated and stimulated: USFR and SSFR) was assessed at 1 and 3 months after RT. Resrlts : All 13 patients showed no significant changes in XQS, LSC and Salivary Flow rates. As a result, we couldn't find out about xerostomia development. Based on the total mean parotid dose, 3,500 cGy, we divided these patients into two groups. The 8 patients (<3,500 cGy) showed no significant changes in XQS, LSC and Salivary Flow rates However, in 5 Patients ($\geq$3,500 cOGy), there was a significant increase in USFR and, SSFR at 3 months after RT, and for the XQS and, LSC at 1 and 3 months after RT. The correlation between XQS and, LSC, and USFR and, SSFR in ail patients (13) was significant at 3 months after RT. The correlation had a tendency to the decrease for USFR and, SSFR in proportion to the increase of XQS and, LSC. Conclusion : Based on the results of this study, IMRT seem to be an effective treatment to significantly decrease the xerostomia. XQS and, LSC seem to be a effective tool for predicting the xerostomia. A total parotid gland mean dose of <3,500 cGy should be a planning goal if substantial sparing of the gland function is desired. Furthermore, patients should be enrolled in a study to define a more accurate threshold dose for the parotid gland.

• Journal of Hospice and Palliative Care
• /
• v.9 no.1
• /
• pp.17-29
• /
• 2006

Purpose: This research aimed to investigate the actual condition and satisfaction of volunteer activity in Australian hospital. Methods: Data was collected by self reported questionnaire from 101 volunteers and analyzed by frequency and percentage, t-test, ANOVA and Sheffe and Pearson's correlation coefficients using SPSS 12.0. Results: 1. Years involved in volunteer work were $5{\sim}10$ years (32.7%), above 10 years (30.7%), $2{\sim}3$ years (11.9%) and $3{\sim}5$ years (10.9%). Types of volunteer work were physical care (32.7%), physical and emotional care (14.9%), and others (18.8%). Types of allocation of tasks were by volunteer coordination (55.7%), and by volunteer preference and consent between volunteer and coordinator (both respectively, 20.5%). Main reasons for volunteer work were to help sick people (61.4%) and to make good use of leisure time (22.8%). Routes to start volunteer work were from his (her) own inquiries (43.4%), from hearing from other volunteers (30.7%) and from mass media (13.1%). 80.2% of volunteers had received some kinds of training or preparation for volunteer work. Suitability of volunteer's skill and ability to voluntary work were 'very well' (74.0%) and 'mostly well' (18.0%). Reimbursements or benefits received for volunteer work were token or lunch or group outing (31.7%), and token and lunch or group outing (19.8%). Evaluation frequency for volunteer work was occasionally (372%), frequently (30.9%), always (17.0%) and never (14.9%). Relationship with volunteer work coordinator was very good (85.0%). The relationship with other volunteers was very good (81.2%). The relationship with hospital staffs was very good (69.7%) and mostly good (21.2%). Family and friend's support for volunteer work was very good (83.2%). 2 The mean score of satisfaction for the hospital volunteer activity was $3.09{\pm}0.49\;(range:\;1{\sim}4)$. The highest score domain was 'social contact', $3.48{\pm}0.61$, and the lowest was 'social exchange', $1.65{\pm}0.63$. An item of the highest score was 'I have an opportunity to help other people' ($3.83{\pm}0.40$), and the lowest score item was 'I will receive compensation for volunteer work I have done ($1.10{\pm}0.78$).' 3. The satisfaction from hospital volunteer activity was shown by significant difference according to sex (t=2.038, P=0.044), marital status (F=3.806, P=0.013), years involved in volunteer work (F=3.326), nam reason to do volunteer work (F=2.707, P=0.035), receive any training or preparation for volunteer work (t=-1.982, 0=0.050), frequency of evaluation for volunteer work (F=7.877, P=0.000), suitability of volunteer's skill and ability to voluntary work (t=2.712, P=0.049), relationship with volunteer work coordinators (F=-2.517, P=0.013), relation with hospital staffs (F=5.202, P=0.007), and support of their volunteer work by their family and friends (t=-3.394, P=0.001). Conclusion: The satisfaction of hospice volunteer activity was moderate. The satisfaction for hospice volunteer activity was shown by significant difference according to sex (t=2.038, P=0.044), marital status (F=3.806, P=0.013), years involved in volunteer work (F=3.326), main reason to do volunteer work (F=2.707, P=0.035), receive any training or preparation for volunteer work (t=-1.982, 0=0.050), frequency of evaluation for volunteer work (F=7.877, P=0.000), suitability of volunteer's skill and ability to voluntary work (t=2.712, P=0.049), relationship with volunteer work coordinator (F=-2.517, P=0.013), relation with hospital staffs (F=5.202, P=0.007), and family and friend's support for volunteer work (t=-3.394, P=0.001). Therefore, it is necessary to consider various factors to improve the satisfaction of voluntary work.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.4
• /
• pp.276-283
• /
• 2013

Purpose: The purpose of this study was to investigate the fit and screw joint stability between Ready-made abutment and CAD-CAM custom-made abutment. Materials and methods: Osstem implant system was used. Ready-made abutment (Transfer abutment, Osstem Implant Co. Ltd, Busan, Korea), CAD-CAM custom-made abutment (CustomFit abutment, Osstem Implant Co. Ltd, Busan, Korea) and domestically manufactured CAD-CAM custom-made abutment (Myplant, Raphabio Co., Seoul, Korea) were fabricated five each and screws were provided by each company. Fixture and abutments were tightening with 30Ncm according to the manufacturer's instruction and then preloding reverse torque values were measured 3 times repeatedly. Kruskal-Wallis test was used for statistical analysis of the preloading reverse torque values (${\alpha}=.05$). After specimens were embedded into epoxy resin, wet cutting and polishing was performed and FE-SEM imaging was performed, on the contact interface. Results: The pre-loading reverse torque values were $26.0{\pm}0.30Ncm$ (ready-made abutment; Transfer abutment) and $26.3{\pm}0.32Ncm$ (CAD-CAM custom-made abutment; CustomFit abutment) and $24.7{\pm}0.67Ncm$ (CAD-CAM custom-made abutment; Myplant). The domestically manufactured CAD-CAM custom-made abutment (Myplant abutment) presented lower pre-loading reverse torque value with statistically significant difference than that of the ready-made abutment (Transfer abutment) and CAD-CAM custom-made abutment (CustomFit abutment) manufactured from the same company (P=.027) and showed marginal gap in the fixture-abutment interface. Conclusion: Within the limitation of the present in-vitro study, in domestically manufactured CAD-CAM custom-made abutment (Myplant abutment) showed lower screw joint stability and fitness between fixture and abutment.

• The korean journal of orthodontics
• /
• v.27 no.5 s.64
• /
• pp.771-779
• /
• 1997

The purpose of this in vitro study was to evaluate the effects of different acid etching times on the enamel surface morphology, shear bond strength and debonding failure mode of orthodontic attachment. Ninety six extracted human mandibular premolars were divided into eight groups of twelve teeth. The buccal surfaces were etched with $37\%$, phosphoric acid for 5, 10, 15, 30, 45, 60, 90 and 120 seconds, respectively. Two teeth from each group were used for scanning electron microscope examination. On the etched buccal surfaces of remaining teeth, orthodontic attachments(lingual buttons) were bonded with light cured orthodontic adhesive. Twenty foot hours after bonding, a Instron universal testing machine was used to determine shear bond strength of orthodontic attachment to enamel. After debonding, bases of orthodontic attachments and enamel surfaces were examined under stereoscopic microscope to determine failure mode. Statistical analysis of the data was carried out with one nay ANOVA and Duncan's multiple range test The results were as follows; 1. There was no statistically significant difference in shear bond strengths between the various etching times(p<0.05). 2. The failure modes of orthodontic attachments had some differences. In 5, 10 and 15 seconds etching groups, the percentage of adhesive/enamel interface failure was higher than that of adhesive/attachment interface failure. On the contrary, in 30, 45, 60, 90 and 120 seconds etching groups, the results were reversed. 3. The etching patterns of enamel surfaces had a great variation. So, we could not find any correlation between etching pattern and bond strength. 4. The findings in this study indicate that in vitro reduction of the etching me to 5 seconds maintains clinically acceptable bond strength. However, further study is required to determine the cause of failure mode in 5, 10 and 15 seconds groups.

• Child Health Nursing Research
• /
• v.20 no.3
• /
• pp.168-175
• /
• 2014

Purpose: Study purposes were to exam effects of self-care education for children with type 1 diabetes on their diabetes management behaviors and to explore the relationship among diabetes management behaviors, knowledge, self-efficacy and clinical variables. Methods: This study was a one group quasi-experimental study. Study participants were children with type 1 diabetes and attended a four hour self-care education of a diabetes camp. Data were collected using structured questionnaires including Diabetes Management Behavior Scale (DMBS), Michigan Diabetes Research and Training Center's Brief Diabetes Knowledge Test and Self-Efficacy for Diabetes Self-Management. Results: The mean age of the participants was 12 (${\pm}2.3$) years. After the education, their DMBS and knowledge improved, but the improvement was not statistically significant (t=1.758, p=.101; t=0.528, p=.606). Two areas of DMBS, daily prevention behaviors and modification of care plan, were associated with study variables. Daily prevention behaviors were associated with duration of diabetes (r=.653, p=.008), HbA1c (r=.563, p=.038) and having a complication (r=-2.788, p=.015). Modification of care plan was associated with age at diagnosis (r=-.552, p=.033). Conclusion: Children with type 1 diabetes could improve some parts of their diabetes management behaviors even after a short diabetes camp.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.4 s.316
• /
• pp.60-69
• /
• 2007

The human eye usually experiences a loss of color sensitivity when it is subjected to high levels of luminance, and perceives a discrepancy in color between high and normal-luminance displays, generally known as a hue shift. Accordingly, this paper models the hue-shift phenomenon and proposes a hue-correction method to provide perceptual matching between high and normal-luminance displays. The value of hue-shift is determined by perceived hue matching experiments. At first the phenomenon is observed at three lightness levels, that is, the ratio of luminance is the same between high and normal-luminance display when the perceived hue matching experiments we performed. To quantify the hue-shift phenomenon for the whole hue angle, color patches with the same lightness are first created and equally spaced inside the hue angle. These patches are then displayed one-by-one on both displays with the ratio of luminance between two displays. Next, the hue value for each patch appearing on the high-luminance display is adjusted by observers until the perceived hue for the patches on both displays appears the same visually. After obtaining the hue-shift values, these values are fit piecewise to allow shifted-hue amounts to be approximately determined for arbitrary hue values of pixels in a high-luminance display and then used for correction. Essentially, input RGB values of an image is converted to CIELAB values, and then, LCh (lightness, chroma, and hue) values are calculated to obtain the hue values for all the pixels. These hue values are shifted according to the amount calculated by the functions of the hue-shift model. Finally, the corrected CIELAB values are calculated from corrected hue values, after that, output RGB values for all pixels are estimated. For evaluation, an observer's preference test was performed with hue-shift results and Almost observers conclude that the images from hue-shift model were visually matched with images on normal luminance display.

• Journal of Science Education
• /
• v.37 no.3
• /
• pp.525-537
• /
• 2013

The purpose of this study was to investigate science integrated process skill of the students in science education center for the gifted. In order to do this, 'free-response test for the assessment of science process skills' developed by Yu-Hyang Kim(2013) was administered to 102 students(15 in elementary school science class, 58 in middle school science class I, and 29 in middle school science class II) who attend the program of science education center for the gifted in C university. The assessment tool measured 9 skills ; formulating inquiry questions, recognizing variables, formulating hypotheses, designing experiment, transforming data, interpreting data, drawing conclusions, formulating generalizations, and evaluating the designed experiments. As a result, the students in science education center for the gifted had relatively high scores in the area of 'formulating hypotheses' and 'recognizing variables', but they had relatively low scores in the area of 'transforming data', 'interpreting data', and 'evaluating the designed experiments'. The 2 items' percentage of correct answers were below 40% ; one is about a drawing a line graph in 'transforming data', and the other requires finding improvements of the experimental design in 'evaluation'. There was no significant difference between boys' scores and girls's one, and between the scores of students in the field of biology and those of students in the other fields(physics, chemistry, and earth science) in science integrated process skills. And there was significant difference according to the periods receiving the gifted education in 'formulating generalizations'. The teaching and learning has to focus on improving science integrated process skills in the program of science education center for the gifted and teaching and learning materials needs to be developed.