• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.521-523
• /
• 2005

A Jumper wire is currently used to connect each fixed power line on both sides of dead end tower for overhead transmission line, but in case of a jumper wire swing under circumstances of typhoon, etc. and the air clearance is deficient then a flashover fault may Happen. Now the angle tower has the jumper support string to prevent a swing of jumper wire and to secure the air clearance between jumper wire and tower main body, but the flashover fault by swing of jumper wire was happened yl times across all over the country, because of the typhoon 'Rusa' in year 2002 and 'Maemi' in year 2003. This paper presents the design and development of 'Counter Weight' which enables to keep the swing angle of jumper wire under 40 degree in design condition to prevent a flashover fault by swing of jumper wire by a high wind pressure load in case of typhoon and have completed a mechanical and electrical characteristic test.

• 한국의류산업학회지
• /
• 제14권2호
• /
• pp.261-268
• /
• 2012

The purpose of this study is to investigate problems of design, fitness, suitability for movement, and wearing comfort of jumper for Korean military tank drivers through analysis of actual wearing condition by questionnaire and field evaluation and to provide basic data for developing its improved design. The survey was done for 477 military tank drivers and evaluation was performed using thermal manikin to measure insulation. The overall satisfaction for design of jumper for military tank driver was over 3.5(likert scale). The overall satisfaction for fitness of jumper for military tank driver was also over 3.5. The satisfactions for material was between 2.39 and 3.13 and the satisfaction for pilling property was the lowest, followed by static property and shape stability after laundering. The satisfactions for movement suitability were standing(3.81), sitting(3,38), raising hand(forward: 2.90, sideward: 3.01), respectively. In insulation evaluation of jumper for military tank drivers and outwears(jacket, jumper), the insulation of jumper for military tank drivers was lower than outwear(jumper) and same with outwear(jacket). The insulation in dynamic and still condition(without wind) of jumper for military tank driver was 0.37clo and 0.31clo, respectively. Its decreation rate in dynamic condition comparing to still condition was 59% which was lower than jacket(0.73clo) and jumper(1.15clo).

• 한국안전학회지
• /
• 제12권1호
• /
• pp.44-50
• /
• 1997

As jumpers for overhead transmission lines increase In size, it Is necessary to take into the characteristics of jumper swaying space in order to determine jumper reinforcements adequately. From the theory of a structure made of beams, formulas for the sideway swaying of overhead transmission lines due to wind are modeled. And also natural frequency of the vibrated jumper is estimated to check the system resonance. The theoretical results can be led good suggestions to improve the economy and reliability of jumper structure.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.83-85
• /
• 1999

The jumper devices of overhead power transmission lines are getting increased in size with the adoptation of higher voltage and bundled conductors. Increasement of jumper devices' size results in the cost increasement. Therefore, the adoptation of prefabricated jumper device is cost effective method in T/L. This papers are mentioned about selection of proper value of standard deviation for jumper devices by dynamic swing characteristics. And we are analyzed to effects for tower scheme and weight addition.

• 패션비즈니스
• /
• 제16권1호
• /
• pp.103-120
• /
• 2012

The study aimed to evaluate the appearance of the men's work clothes jumpers developed to suggest the prototype work clothes jumper patterns by using the 3-D clothing simulation technology. The 3-D simulated clothing images considered the upper body features of men in the age range between 20 and 59 in South Korea. A questionnaire survey conducted previously suggested a basic jumper style with shirt collar and snap opening cuffs for the heavy industry workers; and discomforting parts of the work clothes jumper of the subject workers have been referred to for the experimental jumper appearance test. Besides, defining the measurements of men's upper bodies enabled to generate the men's 3-D virtual models representing each age group's average body feature. The significant body measurement factors for men's 3-D body modeling and jumper pattern-making were stature for the height factor; chest, waist and hip circumferences for the circumference factor; waist back, hip and arm lengths and interscye front/back for the length factor; and back neck breadth for the breadth factor and armscye and scye depths for the depth factor. The men's body measurements of 30's were implemented to three experimental jumper pattern-making methods, i.e. the 1st method using the relations based on stature and chest circumference; the 2nd method using the direct body measurements; and the 3rd method adopting the maximum ease amount of given body measurements whether relations or direct measurements except the direct measurement of scye depth. A comparison among the three experimental jumpers' simulated images highlighted that the appropriate ease amount of the jumper gained higher scores in terms of the jumpers' front, side, back and sleeve parts and the total silhouettes. Therefore the 3rd experimental jumper was finally selected for the heavy industry workers.

• 복식
• /
• 제52권8호
• /
• pp.29-39
• /
• 2002

It was increased leisure hours by automation and computerization of industry. Many people spend on hours in enjoying leisure sports, and then. nowadays, Many women tend to prefer casual wear to formal suits. The purpose of this research was to design of outdoor-wear that improve the functional and aesthetic effects for clothing comfort. Total 4 design prototype consisting of jumper and slacks were developed for this research. Outdoor-wear design forced on armhole type of jumper and ease of the back crotch length of slacks to improve the functional and aesthetic effects. And Outdoor-wear design focused on color harmony to aesthetic effects. Ease amount and materials of jumper and slacks were controlled. Design A: Jumper was designed as dropped shoulder with set-in steeve and band collar, A break-away zipper to facilitate ventilation control were made the area of back of jumper and the area of outside seam line of slacks Color of jumper and slacks were olive green color. Ease amount of the crotch length of slacks pattern was constructed as 7% of total crotch length: Design B 4DM cut pattern were applied to the jumper and slacks pattern. A break-away zipper to facilitate ventilation control were made the area of back of jumper and the area of inside seam line of thigh. Color of jumper and slacks were grey and orange color. Ease amount of the crotch length of slacks pattern was constructed as 5% of total crotch length. Design C : Jumper was designed as the set in sleeve and hood. and A break- away zipper to facilitate ventilation control were made the ares of the armhole and elbow. Color of jumper and slacks were ivory and orange color. Ease amount of the crotch length of slacks pattern was constructed as 5% of total crotch length. Design D : Jumper was designed as raglan sleeve. Color of jumper and slacks were olive green color. Ease amount of the crotch length of slacks pattern was constructed as 5% of total crotch length. Total six females, ages 20-45, served as subjects for this research. Subjects have standard body type, generally, wearing 66 size of ready-to-wear clothing. The performance of the newly designed outdoor-wear was evaluated for their effectiveness in several aspects such as conditions of skin temperature, sensory evaluation of comfort during body movements, appearance and color harmony and aesthetic collar design. Design 3 was appeared to be the most positive in aesthetic evaluation and functional effects of design 2 of 4DM cut pattern was appeared to be beter than other designs.

• 복식문화연구
• /
• 제30권2호
• /
• pp.226-242
• /
• 2022

For clothing items that combine the top with the bottom, such as a jumper suit, it is necessary to design original forms to develop clothes in various styles that can satisfy aesthetic and functional needs. Therefore, to determine the original forms of women's jumper suits, this study aimed to analyze the patterns of women's jumper suits being sold in the market comparatively and evaluate their fitness. For the study method, this researcher obtained five types of women's jumper suits from local brands and compared the patterns' measured sizes, then conducted exterior evaluation on the surplus according to five different movements and analyzed the values of distortion of clothing pressure comparatively. According to the results, in the basic posture, brands A and C received favorable results, while in the other movements, brand B, which had the biggest surplus on the bottom, was evaluated favorably. In conclusion, in the patterns of women's jumper suits, a bigger surplus is added to either the crotch length or crotch girth rather than the top length, and the top and the bottom tend to have a different surplus according to the design. In addition, based on the values of body surface lengths according to the range of movements, this study suggests that an additional surplus be added to the length.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.35-37
• /
• 1997

The jumper devices of overhead transmission lines are getting increased in size with the adaptation of higher voltage and bundled conductor. Incensement of jumper devices size caused to large swing angle and flashover with tower post or arm. The suspension I type string type jumper devices are used for swing restraint of suspension type. This paper is compared and analysized to its swing characteristics. The results showed that suspension I string type has a good effects.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.819-821
• /
• 2000

The purpose of swing analysis for prefabricated jumper devices are to prevent flashover between jumper device and tower post. To prevent flashover. proper weight is add to the horizontal rod. This paper is a proposed to the analysis methods and the effects for unbalanced swing characteristics of prefabricated jumper devices. And the proposed technique is applied with the 345kV and 765kV transmission lines.

• 한국생활과학회지
• /
• 제19권1호
• /
• pp.119-126
• /
• 2010

We need to develop a target market for elderly women by increasing the ratio of functional apparel. The purpose of this study was to provide basic data for developing a Leisure Sports Jumper and improving the quality of life of clothing for female elderly consumers. This study reviewed the current situation on the production of the functional Leisure Sports Jumper for the elderly women in literature. For the experimental study, we selected Leisure Sports Jumpers from five apparel brands, and evaluated a sensory test on 20 subjects representing the average body shape of the elderly women aged from 65 to 75. After the first sensory test, we manipulated the patterns for samples of the Leisure Sports Jumper. In the second sensory test, visual and cognitive appropriateness of the Leisure sports jumpers were assessed by the elderly women. The results of the study were as follows: the Leisure Sports Jumper of brand 'C' showed the highest appropriateness in terms of neck, armholes, and sleeves among the 5 brands. The Leisure Sports Jumper of brands 'B' and 'D' showed the lowest appropriateness in the width of the armpits among the 5 brands. Except for the length of the Leisure Sports Jumper, the margin, location of the pocket, and armholes had the lowest score in the first test showing over 3.5 points.