• Steel and Composite Structures
• /
• v.52 no.1
• /
• pp.31-43
• /
• 2024

A very widely used analytical method (mathematical model), mentioned in Eurocode 3, to examine the connections' bending behavior is the component-based method that has certain weak points shown in the plastic behavior part of the moment-rotation curves. In the component method available in Eurocode 3, for simplicity, the effect of strain hardening is omitted, and the bending behavior of the connection is modeled with the help of a two-line diagram. To make the component method more efficient and reliable, this research proposed its advanced version, wherein the plastic part of the diagram was developed beyond the guidelines of the mentioned Regulation, implemented to connect the end plate, and verified with the moment-rotation curves found from the laboratory model and the finite element method in ABAQUS. The findings indicated that the advanced component method (the method developed in this research) could predict the plastic part of the moment-rotation curve as well as the conventional component-based method in Eurocode 3. The comparison between the laboratory model and the outputs of the conventional and advanced component methods, as well as the outputs of the finite elements approach using ABAQUS, revealed a different percentage in the ultimate moment for bolt-extended end-plate connections. Specifically, the difference percentages were -31.56%, 2.46%, and 9.84%, respectively. Another aim of this research was to determine the optimal dimensions of the end plate joint to reduce costs without letting the mechanical constraints related to the bending moment and the resulting initial stiffness, are not compromised as well as the safety and integrity of the connection. In this research, the thickness and dimensions of the end plate and the location and diameter of the bolts were the design variables, which were optimized using Particle Swarm Optimization (PSO), Snake Optimization (SO), and Teaching Learning-Based Optimization (TLBO) to minimization the connection cost of the end plate connection. According to the results, the TLBO method yielded better solutions than others, reducing the connection costs from 43.97 to 17.45€ (60.3%), which shows the method's proper efficiency.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.2
• /
• pp.387-393
• /
• 2021

In this study, finite element analysis was performed to evaluate a method of increasing the fatigue life of the pipe connection structure commonly used in the topside structure of offshore platforms. MSC Patran/Nastran, a commercial analysis program, was used, and the critical structural model was selected from the global analysis. To realize the stress concentration phenomenon according to the load, modeling using 8-node solid elements was implemented. The main loads were considered to be two lateral loads and a tensile load on a diagonal pipe. To check the hotspot stress at the main location, a 0.01 mm dummy shell element was applied. After calculating the main stress at the 0.5-t and 1.5-t locations, the stress generated in the weld was estimated through extrapolation. In some sections, this stress was observed to be below the fatigue life that should be satisfied, and reinforcement was required. For reinforcement, a bracket was added to reduce the stress concentration factor where the fatigue life was insufficient without changing the thickness or diameter of the previously designed pipe. Regarding the tensile load, the stress in the bracket toe increased by 23 %, whereas the stress inside and outside of the pipe, which was a problem, decreased by approximately 8 %. Regarding the flexural load, the stress at the bracket toe increased by 3 %, whereas the stress inside and outside of the pipe, which was also a problem, decreased by approximately 48 %. Owing to the new bracket reinforcement, the stress in the bracket toe increased, but the S-N curve itself was better than that of the pipe joint, so it was not a significant problem. The improvement method of fatigue life is expected to be useful; it can efficiently increase the fatigue life while minimizing changes to the initial design.

• The Journal of the Korean bone and joint tumor society
• /
• v.16 no.1
• /
• pp.14-20
• /
• 2010

Purpose: To investigate prognostic factors influencing on local recurrence, distant metastasis and event-free survival of liposarcomas. Materials and Methods: Fifty-two patients managed for liposarcomas since 1993 were analyzed respectively in the view of prognostic influence of patient age, tumor size, location, histologic type, histologic grade, resection type, surgical margin, chemotherapy and radiation therapy on local recurrence, distant metastasis and event-free survival. The mean follow up period was 39 months. The univariate and multivariate regression analysis were performed for statistical evaluation. Results: The local recurrences occurred in 11 patients (21.2%) and distant metastasis in 4 patients (8%), Event-free survival rate at 4 year follow up was 67%. In univariate analysis, histologic grade, surgical margin, chemotherapy and radiation therapy were significant prognostic factors on local recurrence (p<0.05). However, histologic grade lost its significance in muitivariate analysis. Trunk location revealed higher rate of distant metastasis than extremity location. In univariate analysis on event-free survival. histologic grade and chemotherapy were significant factors (p<0.05). No factor remained significant in multivariate analysis. Conclusion: Considering selection bias, positive surgical margin was negative prognostic factor on local recurrence. Liposarcomas arisen in trunk revealed higher rate of distant metastasis. There was no independent prognostic factor on event-free survival of patients with liposarcomas.

• Journal of Advanced Navigation Technology
• /
• v.21 no.4
• /
• pp.413-421
• /
• 2017

In this paper, we designed and fabricated a compact UHF receive module for efficient operation such as tactical and operation situation, target location information confirmation, target reset using Link-K(Korean joint tactical data link system). And the effect of target reset was analyzed by simulation. The designed module consists of UHF(ultra high frequency) receiver section, control section, and power distribution section. The UHF receiver section performs frequency down conversion, filtering and automatic gain control, etc. The control section demodulates frequency down-converted signals, extracts information, and performs external interworking. The power distribution section supplies external power, generates and supplies the power required by each section. The fabricated module was dimension of $105{\times}105{\times}80mm$ and weighed 1.10 kg and The receiving distance is more than 50 km.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.2
• /
• pp.149-155
• /
• 2017

In this research, the surface covered curing method using the double-layered bubble sheet was evaluated. This double-layered bubble sheet has outstanding insulating performance with its low heat conductivity and high economic feasibility with its high durability. However, in the case of wall-typed building construction, the area of exposed rebar is curious on curing performance with the double-layered bubble sheet in spite of the double-layered bubble sheet showed favorable performance for slab. Therefore, in this research, regarding the actually constructed wall-typed apartment building, the most efficient curing method was suggested based on the evaluation of curing performance depending on temperature distribution depending on various location of covered or exposed rebar. As a result, the D method was determined as the most efficient curing method without any concern of early-age frost damage. However, by considering easiness of construction, the B method of covering the pieced double-layered bubble sheet on gap between rebars can be another option of desired result.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.2
• /
• pp.217-226
• /
• 2007

Putting score counts about 43 % of the golf score. The dominant idea of the putting motion to amateur golfers as well as to many professional golfers is a pendulum-like motion. If a golfer's putting stroke motion is a pendulum-like motion, the putting motion should be straight-back-and-through, the same backswing, downswing, and follow through length and period, and a swing with a fixed hinge joint. If the putting motions of the human are different from the pendulum motion, there could be confusion in understanding and teaching golf putting. The purpose of this study was to examine the center of rotation(COR) of the putter head to reveal whether professional golfers really putt like a pendulum. Thirteen male professional golfers were recruited for the study. Each golfers executed 10.94 m putts six times on an artificial grass mat. Putter head position data were collected through a 60 Hz three-dimensional motion analysis system and low pass filtered with cut-off frequency of 6 Hz. COR of the putter head was mathematically acquired. Each golfer's last five putting motions were considered. The results show that the COR of the putter head was neither fixed nor located inside of the golfer. The medio-lateral directional component of the COR of the putter head fluctuated in the range of 10 cm during downswing and follow through. The anterior-posterior directional component of the COR of the putter head was fixed from the beginning of the downswing through impact. Just after impact, however, it moved to the target up to 60 cm. The superior-inferior directional component of COR of the putter head moved in a superior direction with the beginning of the downswing and showed peak height just prior to impact. During the follow through, it moved back in an inferior direction. The height-normalized peak value of the COR of the putter head was $1.4{\pm}0.3$ height. Technically speaking, male professional golfers' 10.94 m putting motion is not a pendulum-like motion. The dominating idea of a pendulum-like motion in putting might come from the image of the flawless, smooth motion of a pendulum.

• Journal of Pharmacopuncture
• /
• v.4 no.3
• /
• pp.109-117
• /
• 2001

Objective : There has been no known report on the pain shock after administering Korean bee-venom therapy. Three accounts of pain shock were observed at the Sangji university affiliated Oriental medicine clinic from July 2001 through September 2001. This thesis will inform clinical progression and cautions on administering Korean bee-venom therapy. Methods: We were able to witness different patterns of pain shock during the treatment of degenerative knee joint, progressive oral paralysis, and A.L.S. In order to reduce heat toxicity of the bee venom, needling points were first massaged with the ice for 10 minutes before injecting $0.1{\sim}0.2cc$ of the bee venom. Points of injection were ST36, LI11, LI4 and others. Pain shock occurred after injecting on inner xi-an, outer xi-an and LI4. The phenomena associated with pain shock was recorded in chronological order and local changes were examined. Results: Through examining 3 patients with the pain shock, we managed to observe clinical progression, duration, and time linked changes on specific regions. We also managed to determine sensitive needling points for the pain shock. Conclution: Following results were obtained from 3 patients with the pain shock caused by Korean bee-venom therapy from July 2001 to September 2001. 1. Either positive or negative responses were shown after the pain shock. For case 1, extreme pain was accompanied with muscular convulsion and tremble, ocular hyperemia, delirium, stiffening of extremities, and hyper ventilation which all suggest positive responses. For case 2 and 3, extreme pain was accompanied with facial sweating, asthenia of extremities, pallor face, dizziness, weak voice, and sleepiness which are the signs of negative responses. 2. The time required to recover to stable state took nearly an hour (including sleeping time) and there was no side effect. 3. Precautions required to prevent the pain shock includes full concentration from the practitioner, accurate point location, precise amount of injection, physiological condition and psychological stability of the patient 4. Coping with the pain shock should be similar with a needle shock, and since extreme pain is accompanied, sufficient psychological rest must be provided. 5. Pain shock occurs because the patient cannot tolerate stimulation on the needling point. Thus, symptoms were similar to the needle shock in addition to excruciating pain. Further investigation and research must be done to have better understanding of an immune response and the pain shock associated with Korean bee-venom therapy.

• The Journal of the Korean bone and joint tumor society
• /
• v.11 no.2
• /
• pp.111-117
• /
• 2005

Purpose: We evaluate the results of treatment of pathologic femur fractures secondary to bone tumors in children. Materials and Methods: Between January 1995 and June 2004, 18 patients(20 cases) were evaluated. Their mean age of the first episode of fracture was 10.2 years and mean follow-up period is 42.5 months. Primary bone tumors, the location of fracture, time to union and complications were evauated. Results: Fractures occurred at proximal portion in 14 cases, shaft 3 cases and distal portion 3 cases. The bone tumors causing pathologic fracture were fibrous dysplasia(9 c ases), simple bone cyst(4 cases), aneurysmal bone cyst(4 cases), nonossifying fibroma(2 cases) and eosinophilic granuloma(1 case). In the treatment for fractures, cast was in 11 cases, internal fixation 8 cases and external fixation in 1 case. In the treatment for tumors, observation was in 11 cases, curettage & bone graft in 8 cases and resection in 1 case. In polyostotic fibrous dysplasia, all cases were treated by cast initially but deformity developed in all cases. Fracture prevention and deformity correction were obtained with intramedullary nailing. Conclusion: Adequate choice of treatment of bone tumor and fracture will result in good prognosis.

• Archives of Reconstructive Microsurgery
• /
• v.8 no.1
• /
• pp.77-83
• /
• 1999

The skin on the dorsum of the foot is a source of the reliable thin and sensory cutaneous free tissue transplantation with or without tendon, bone and joint. A composite flap with attached vascularized tendon grafts for the combined loss of skin and tendon on the dorsum of the hand and foot offers an immediate one stage solution to this problem. The flap provides a very durable innervated tissue cover for the heel of the foot and the dorsum of the hand and an osteocutaneous transfer combined with the second metatarsal. The major dorsalis pedis artery is constant in size, but the first dorsal metatarsal artery is variable in size and location. The dorsal surface of the foot receives sensory innervation through the superficial peroneal nerve and the first web through the deep peroneal nerve. Authors had performed 5 dorsalis pedis free flap transplantation in the foot and hand at Department of Orthopedic Surgery, Chonbuk National University Hospital from August 1993 through August 1997 and followed up for the period of between 19 and 67 months until March 1999. The results were as follows 1. 5 cases dorsalis pedis free flap transfer to the foot(4 cases) and the hand(1 case) were performed and the recipient was foot dorsum and heel 2 cases each and hand dorsum 1 case. 2 All of 5 cases(100%) were survived from free flap transfer and recipient artery was dorsalis pedis artery(2 cases), anterior tibial artery(1 case), posterior tibial artery(1 case) and ulnar artery(1 case) and recipient veins were 2 in number except in the hand. 3. Long term follow up of the exterior and maceration was good and sensory recovery was poor 4. Donor site was covered with full thickness skin graft obtained from one or both inguinal areas at postoperative 3rd week and skin graft was taken good and no morbidity was showed.

• The Journal of the Korean bone and joint tumor society
• /
• v.15 no.2
• /
• pp.93-103
• /
• 2009

Purpose: We evaluated the outcomes of surgical reconstructions using recycled autograft augmented with VFG for bone defects caused by tumor resections. Materials and Methods: Ten patients with a malignant or locally aggressive bone tumor who were managed with recycled autograft augmented with VFG and followed up minimum 1 year were evaluated for bone union, functional result and complications. The influence of various factors on bone union and functional outcomes were also analyzed. Results: Bone unions were obtained at 13 of 20 junctions. Average union time was 3.7 months at metaphyseal junctions and 8 months at diaphyseal junctions (P<0.05). At diaphyseal junctions, younger aged group and intramedullary location group showed earlier bone union (P<0.05). The mean functional score was 81%. There were 3 nonunions, 4 delayed unions and 2 recycled bone resorption combined with fractures. Conclusion: To obtain excellent results, proper microvascular technique, sufficient length of VFG bridging both junctions, stable internal fixation and protection of reconstructed bone until union are necessary.