• Transactions on Control, Automation and Systems Engineering
• /
• v.3 no.4
• /
• pp.210-216
• /
• 2001

In this paper, design of a 3-degree-of-freedom mobile robot with three caster wheels is performed. Initially, kinematic modeling and singularity analysis of the mobile robot is performed. It is found that the singularity can be avoided when the robot has more than two wheels on which two active joints are located. Optimal kinematic parameters of mobile robots with three active joint variables and with four active joint variables are obtained and compared with respect to kinematic isotropic index of the Jacobian matrix of the mobile robot which is functions of the wheel radius and the length of steering link.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.2
• /
• pp.363-373
• /
• 1995

In this study, a FE model tuning method using experimental modal data was suggested after examining all the published conventional methods. The idea of this method is introducing scale factors to maintain both the structural connectivity and the consistency in the corrected stiffness matrix which makes it always possible to interpret the stiffness elements with the corresponding physical configuration of the targeting structure. The scale factors are determined to minimize the objective function of eigen-properties. The proposed method was tested to determine the joint stiffness of a T shaped beam. The test results were also compared with the tuned stiffness obtained from a probed commercial package (SYSTUNE) and found that this method is very accurate and compatible.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.1167-1172
• /
• 1990

This paper discusses a force distribution scheme which minimizes the weighted norm of the forces/torques applied on weak points of cooperating multiple robot arms. The scheme is proposed to avoid the damage or unwanted motion of any weak point of robots or object stemming from excessive forces/torques. Since the proposed scheme can be used for either the joint torque minimization or the exerted force minimization on the object, it can be regarded as a unified force minimization method for multiple robot arms. The computational complexity in this scheme is analyzed using the properties of Jarcobian. Simulation of two identical PUMA robots held an object is carried out to illustrate the proposed scheme. By the proper choice of the weighting matrix in the performance index, we show that force minimization for a weak point can be achieved, and that the exerted force minimization on the object can be changed to the joint torque minimization.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.548-551
• /
• 1999

We design a keyframe editor of arms and hands for 3D sign-language animation using inverse kinematics. In the previous study, we acquired only the joint angles of two arms after selecting arbitrarily the shapes of hands. In this paper, both joint angles of arms and hands are calculated by the same transformation matrix of the inverse kinematics. In the method, the design window of arm gestures can be converted into that of hand shapes by clicking a button. Experimental results show a possibility that the proposed method could be used for building up the sign-language communication dictionaries.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.10a
• /
• pp.47-52
• /
• 2000

F.R.P specimens were made by mixture CM(chopped mat) 450-104 matrix & RC(roving clothes)570-100 Roving, the mixture ratio Resin: hardener (92:8) for tensile test. It was also made of plates by hand lay-up method and was been cured for 24 hours and then was cut tensile specimens in accordance with ASTM D638 Type 3. Knowing exact behavior of bonded area's stress and strain when the tensile test was going on, the test specimens were made of 2 plies laminae of F.R.P in each for supporting cut part in middle of specimen length. And in middle part also were covered of F.R.P plies of 1/2, 2/3 length of specimen in each as well. Also we consider shear stress in adhered area. This study reveals that as plys length is more longer, rupture stress grows remarkably larger.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1775-1776
• /
• 2008

This paper presents a adaptive fuzzy control suitable for motion control of multi-link robot manipulators with uncertainties. When joint velocities are available, full state adaptive fuzzy feedback control is designed to ensure the stability of the closed loop dynamic. If the joint velocities are not measurable, an observer is introduced and an adaptive output feedback control is designed based on the estimated velocities. To reduce the number of fuzzy rules of the fuzzy controller, we consider the properties of robot dynamics and the decomposition of the unknown input gain matrix. The proposed controller is robust against uncertainties and external disturbances. The validity of the control scheme is demonstrated by computer simulations on a two-link robot manipulator.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.831-834
• /
• 2000

The sign-language tan be used a9 an auxiliary communication means between avatars of different languages. At that time an intelligent communication method can be also utilized to achieve real-time communication, where intelligently coded data (joint angles for arm gestures and action units for facial emotions) are transmitted instead of real pictures. In this paper we design a gesture-emotion keyframe editor to provide the means to get easily the parameter values. To calculate both joint angles of the arms and the hands and to goner-ate the in keyframes realistically, a transformation matrix of inverse kinematics and some kinds of constraints are applied. Also, to edit emotional expressions efficiently, a comic-style facial model having only eyebrows, eyes nose, and mouth is employed. Experimental results show a possibility that the editor could be used for intelligent sign-language image communications between different lan-guages.

• International Journal of Reliability and Applications
• /
• v.18 no.2
• /
• pp.65-82
• /
• 2017

Abstract. Camilo Dagum proposed several variants of a new model for the size distribution of personal income in a series of papers in the 1970s. He traced the genesis of the Dagum distributions in applied economics and points out parallel developments in several branches of the applied statistics literature. The main aim of this paper is to define a bivariate Dagum distribution so that the marginals have Dagum distributions. It is observed that the joint probability density function and the joint cumulative distribution function can be expressed in closed forms. Several properties of this distribution such as marginals, conditional distributions and product moments have been discussed. The maximum likelihood estimates for the unknown parameters of this distribution and their approximate variance-covariance matrix have been obtained. Some simulations have been performed to see the performances of the MLEs. One data analysis has been performed for illustrative purpose.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.4
• /
• pp.200-205
• /
• 1993

In many applications, the typical parallel-jaw end-effector of a robot arm has been remarkably satisfactory. But, it is not adequate for the applications such as complicated manipulation. In the study, a finger with 4 joints (so, having redundancy) was consturcted to investigate the characteristics of an articulated hand. Each joint was driven by one actuator, and the motor torque was transmited to each joint through a tendon-pulley system. In the context, major considerations for hardware design and the method to solve the inverse kinematics of a redundant manipulator were presented. Finally, the basic capabilities of an articulated hand were presented through experiments.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.6_1
• /
• pp.993-999
• /
• 2023

In this paper, a novel polishing tool mechanism with 3-axis compliance is presented, which consists of 2-axis rotational and 1-axis linear compliances in series. The 2-axis rotational compliance mechanism is made up of four cantilever beams for adjusting rotational stiffness and one flexure universal joint at the center for constraining the z-axis deflection. The 2-axis rotational compliance can mechanically adjust the polishing tool to machined surfaces. The polishing press force can be simply controlled by using a linear spring along the z-axis. The 2-axis rotational and 1-axis linear compliance design is decoupled. The stiffness analysis of the 2-axis compliance mechanism was performed based on link compliance matrix and rigid body transformation. A 3-axis polishing tool was designed by configuring the 2-axis compliance mechanism and one linear spring.