• 비파괴검사학회지
• /
• 제26권6호
• /
• pp.417-426
• /
• 2006

A Digital X-ray imaging system using Compton backscattering has been developed to obtain a cross-sectional profile and mass loss of corroded lap-splices of aging aircraft from density variation. A slit-type camera was designed to focus on a small scattering volume inside the material, from which the backscattered photons are collected by a collimated scintillator detector for interpretation of material characteristics. The cross section of the lap-joint is scanned by moving the scattering volume through the thickness direction of the specimen. The mass loss of each layer has been estimated from a Compton backscatter A-scan to obtain the thickness of each layer including the aluminum sheet, the corrosion layer and the sealant. Quantitative information such as location and width of planar corrosion in the lap splices of fuselages is obtained by deconvolution using a nonlinear least-square error minimization method(BFGS method): A simple reconstruction model is also introduced to overcome distortion of the Compton backscatter data due to attenuation effects attributed to beam hardening and quantum noise.

• 동력기계공학회지
• /
• 제2권2호
• /
• pp.73-80
• /
• 1998

The identification of drilling joint dynamics which consists of drilling and structural dynamics and the on-line time series detection of malfunction process is substantial not only for the investigation of the static and dynamic characteristics but also for the analytic realization of diagnostic and control systems in drilling. Therefore, We have discussed on the comparative assessment of two recursive time series modeling algorithms that can represent the drilling operation and detect the abnormal geometric behaviors in precision roundshape machining such as turning, drilling and boring in precision diemaking. For this purpose, simulation and experimental work were performed to show the malfunctional behaviors for drilling operation. For this purpose, a new two recursive approach (Recursive Extended Instrument Variable Method : REIVM, Recursive Least Square Method : RLSM) may be adopted for the on-line system identification and monitoring of a malfunction behavior of drilling process, such as chipping, wear, chatter and hole lobe waviness.

• International Journal of Automotive Technology
• /
• 제5권4호
• /
• pp.303-309
• /
• 2004

In this paper, an interfacial crack length has been detected by using the ultrasonic attenuation coefficient on the adhesively bonded double-cantilever beam (DCB) joints. The correlations between energy release rates which were investigated by experimental measurement, the boundary element method (BEM) and Ripling's equation are compared with each other. The experimental results show that the interfacial crack length for the ultrasonic attenuation coefficient and energy release rate increases proportionally. From the experimental results, we propose a method to detect the interfacial crack length by using the ultrasonic attenuation coefficient and discuss it.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 Techno-Fair 및 추계학술대회 논문집 전기물성,응용부문
• /
• pp.85-86
• /
• 2008

케이블의 원가절감을 위해 절연체의 절연두께를 줄이거나 초초고압화가 되어 갈수록 절연성능의 신뢰성 향상이 한층 요구되고 있다. 이를 위해 케이블 및 접속함의 절연체 내에 각종의 결함이 어느 정도 절연성능을 떨어뜨리는지 정량적으로 파악하여 개선할 필요가 있다. 또한 완제품 내 잔족하고 있는 이물의 종류 및 위치를 알 수 있으면 생산공정 내에서 이물 유입 경로를 파악하여 이물이 유입되는 것을 차단할 수 있다. AC내전압 파괴시험을 수행할 때 설계치 보다 저전계에서 파괴될 경우 파괴공을 조사하여 원인을 규명하고자 하지만 국부적인 결함으로 인한 파괴는 결함부를 소실시키기 때문에 파괴공 및 주위의 절연체를 현미경으로 관찰하여도 찾기가 어렵다. 따라서, 전원을 고속으로 차단하여 결함부가 완전히 소손되는 것을 막고 PD발생 위치를 추정하여 결함을 확인하는 방법이 요구 되어진다. 이러한 시험 방법을 전구차단법 이라고 하며, 고도의 PD측정기술과 판정기술이 필요한 종합적인 기술이다. 본 논문에서는 PPD 기술의 핵심인 노이즈 제거 기술과 판별기술을 서술하고 실제 접속함(PMJ)에 적용하여 PPD 기술의 유효함을 증명하였다.

• 로봇학회논문지
• /
• 제8권3호
• /
• pp.164-172
• /
• 2013

This paper presents a new concept of a 1-DOF elbow exoskeleton driven by a twisted strings-based actuator. A novel joint actuation mechanism is proposed and its kinematic model is presented along with its experimental evaluation, and guidelines on how to choose the strings suitable for such an exoskeleton are given. We also proposed and experimentally verified a human intention detection method which takes advantage of intrinsic compliance of the mechanism. The study showed that the developed twisted strings-driven elbow exoskeleton is light, compact and have a high payload-to-weight ratio, which suggests that the device can be effectively used in a variety of haptics, teleoperation, and rehabilitation applications.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 가을 학술발표회 논문집
• /
• pp.429-436
• /
• 2004

For the in-situ health monitoring of critical members in civil infra-structures, ultrasonic guided Lamb waves-based non-destructive evaluation (NDE) is very suitable. However, a chief drawback of the Lamb wave techniques is that multiple modes exist at all frequencies and the modes are generally dispersive, which means that the received signals may be very complicated. To overcome these complications, selective transmitting and receiving of a single A/sub 0/ mode within a frequency range can be adopted. Furthermore, a wavelet technique can be utilized to decompose the Lamb wave response into wavelet coefficients as a tool for signal processing. The changes in the Lamb waves interacting with damages in the steel plates are successfully characterized by this wavelet technique, through the amplitude change of the wavelet coefficients. In this paper, the feasibility of detecting a line crack on the surface of a steel plate and loosened bolts in a joint steel specimen using the Lamb waves and the wavelet technique is investigated.

• Asian Pacific Journal of Cancer Prevention
• /
• 제17권3호
• /
• pp.1135-1139
• /
• 2016

Background: Head and neck cancer (HNC) is one of the deadliest cancers worldwide. Early detection is a key determinant of HNC prognosis. Hence, raising awareness of this disease may improve survival rates. The present study evaluated the level of awareness and screening status for HNC in the general population of Jeddah, Saudi Arabia. Materials and Methods: An e-questionnaire was distributed during our HNC awareness campaign at the Red Sea Mall in Jeddah. The questions assessed HNC knowledge and screening status among participants. Results: Of the 112 respondents, 68% indicated that they had no knowledge of HNC. Social media was the major source of information (39%) for respondents. The majority (40%) believed that it was the joint responsibility of dentists, dental hygienists, and general physicians to screen for HNC; 82% had never been screened. Conclusions: Knowledge and awareness of HNC must be increased in the general population and among dental health professionals.

• 약학회지
• /
• 제51권5호
• /
• pp.336-342
• /
• 2007

Treatment of hypertension is important in reducing death and attack rates by Ischemic heart disease (IHD). The purposes of this study are to investigate recent prescriptions for patients with IHD and to evaluate antihypertensive drug use. On the basis of the guidelines proposed by Seventh Report of the Joint National Committee on prevention, detection, evaluation, and treatment of high blood pressure, we analyzed prescriptions of antihypertensive drugs for patients with IHD. It is necessary to set up new guideline for appropriate treatment to lower death and attack rates for patients with IHD.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1701-1706
• /
• 2007

Jointless AF(Audio Frequency) Track Circuit is more comfortable than exist joint track circuit. This electrical circuit's function is detection train on rail, and transmit information between wayside and vehicle. 'Korea Railroad Corporation' proposed for revision of the Korean railway standards(KRS SG 0038-06 R, 2006.5.16) "Non-insulated AF Track Circuit". This proposal equipment developed to extend use for station of National Railway exist line. According to test standards Korean railway safety law and its ordinances, which were committed to Korea Railroad Research Institute, the professional committee 'Railway facility sector II' have helded on January in 2007. In this investigation, the changed test norm will be review the difference of important function test standards of new version to conform effectivity and safety test procedure according to the KS A 1025.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권4호
• /
• pp.161-165
• /
• 2006

In this paper, we developed HPF (high pass filter) consists of lumped LC components to decrease the noises that are detected in PD (partial discharge) measuring test, and adapted it to field test. We tested it under laboratory circumstances like the fields, and measured the phase change properties of detected signal in UHF sensor with Lemke Probe and oscilloscope (TDS-3054, Tektronix). As a result, we obtained available data showing the decrease of noises in the experiments with the developed HPF from the joint box of 22.9kV distribution line. The result can be adapted to prevent the degeneration of the XLPE power cable, and to observe and diagnosis the underground power transmission cable at the ultra-high voltage.