• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1583-1585
• /
• 2007

The purpose of this research is to control proper processing condition of RGB photo resistant in the ink-jet process increasing processing ability by adding additives. The viscosities of modified RGB photo resistant were $10{\sim}14cps$ and the additives could decreased agglomeration and flowing trace of photo resistant effectively. Another way, the adhesion between photo resistant and glass substrate was improved by modifying photo resistant and substrate. The surface tensions of modified photo resistant were same as that of original RGB photo resistant. The additives appeared a better compatibility with photo resistant, and the micelle of photo resistant did not be broken during modified process.

• ETRI Journal
• /
• v.34 no.1
• /
• pp.44-54
• /
• 2012

Because of the intrinsic lack of internal-system observability and controllability in highly integrated multicore processors, very restricted access is allowed for the debugging of erroneous chip behavior. Therefore, the building of an efficient debug function is an important consideration in the design of multicore processors. In this paper, we propose a flexible on-chip debug architecture that embeds a special logic supporting the debug functionality in the multicore processor. It is designed to support run-stop-type debug functions that can halt and control the execution of the multicore processor at breakpoint events and inspect the possible causes of any errors. The debug architecture consists of the following three functional components: the core debug support block, the multicore debug support block, and the debug interface and control block. By embedding this debug infrastructure, the embedded processor cores within the multicore processor can be debugged simultaneously as well as independently. The debug control is performed by employing a JTAG-based scanning operation. We apply this on-chip debug architecture to build a debugger for a prototype multicore processor and demonstrate the validity and scalability of our approach.

• Journal of the Korean Society of Costume
• /
• v.59 no.1
• /
• pp.29-46
• /
• 2009

Aiming at finding symbolistic meanings and characteristics of makeup in Chinese Beijing Opera("BO"), this study formulated a theoretical framework mainly from literature in the Symbolism and symbolistically analyzed materials related to BO makeup from literature, internet web pages and illustrated news concerning performing arts. Main objects to analyze are the characteristics of four main roles in BO and the patterns, symbols, ornaments and traditions of Beijing Opera facial makeup("BOFM"). Four main roles are Sheng, Tan, Ching and Chou, categorized by gender, age, social position and personality. The result to analyze symbolistic meanings and characteristics of makeups for the roles in BO are as follows: the patterns and colors of BOFM function as explanations to help audiences understand each role's personality and dramatic situations as well as provide hints about the development and ending of an opera: that is, BO makeup is a communicative intermediary between audiences and actors in BO. It tends to follow the stereotypes, which conventionally dress and exaggerate the characters of roles, and copy the traditional Chinese perception about colors. Thus, by the metaphysical and typical expression of BOFM, Chinese people have not been pursuing the realism in opera but applying BO makeup to a mutual communication method between audiences and performing artists as to share their collective cultural heritages and spirits. Threfore, BO makeup has been an interacting language between the two entities and grown within the history of BO as a beauty art to highlight a BO by its unique systems, ornaments and beauty.

• Advances in concrete construction
• /
• v.10 no.5
• /
• pp.417-429
• /
• 2020

Waste glass is a global solid waste with huge reserves. The discarded waste glass has caused a series of problems such as resource waste and environmental pollution, so it is urgent to recycle waste glass with high replacement level. Glass powder (GP), as a supplementary cementitious material (SCM), used in cement-based materials has already become one of the important ways to recycle waste glass mainly attributed to its pozzolanic reaction and filling effect, especially to the suppressed ASR expansion. This paper demonstrates an overview of the properties of GP and its effect on the fresh and mechanical properties of cement-based materials. The study found that the influence of GP on the performance of cement-based materials mainly depends on its content, particle size, color and type, curing conditions, and other SCMs. Finally, based on the problems involved in the investigation of concrete containing GP, some corresponding suggestions and efforts are given to further guide the utilization of GP in cement-based materials.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.10
• /
• pp.4943-4946
• /
• 2012

Studies have reported an association between the TERT rs2736098 single nucleotide polymorphism (SNP) and cancer susceptibility, but the results remain inconclusive. Toprovide a more precise estimation of the relationship, a meta-analysis of 8 published studies including 8,070 cases and 10,239 controls was performed. Stratification by sample size, genotyping method, source of controls and ethnicity were used to explore the source of heterogeneity. In the overall analysis, no significant association was found between the TERT rs2736098 polymorphism and cancer risk. However, the result showed the rs2736098 was significantly associated with an increased cancer risk and the heterogeneity was effectively decreased for homozygote comparison by removal of two studies: OR = 1.337 (95% CI = 1.183-1.511; Pheterogeneity = 0.087). In the subgroup analysis by ethnicity, a significantly increased risk of cancers was found among Asians (OR = 1.413, 95% CI = 1.187-1.683 for AA versus GG). Our meta-analysis did not show that the TERT rs2736098 plays an important role in cancer risk. More studies with larger sample size and well-matched controls are needed to confirm the findings.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05c
• /
• pp.67-70
• /
• 2002

The composites were fabricated 61vol% ${\beta}$-SiC and 39vol.% $TiB_2$ powders with the liquid forming additives of 8, 12, 16wt% $Al_2O_3+Y_2O_3$ by pressureless annealing at $1650^{\circ}C$ for 4 hours to form YAG. The result of phase analysis of composites by XRD revealed ${\alpha}$-SiC(6H), $TiB_2$, and YAG($Al_5Y_3O_{12}$) crystal phase. The relative density and the Young's modulus showed the highest value of 82.29% and 54.60 Gpa for composites added with 16wt% $Al_2O_3+Y_2O_3$ additives at room temperature.

• ETRI Journal
• /
• v.35 no.2
• /
• pp.301-310
• /
• 2013

Nowadays, the multicore processor is watched with interest by people all over the world. As the design technology of system on chip has developed, observing and controlling the processor core's internal state has not been easy. Therefore, multicore processor debugging is very difficult and time-consuming. Thus, we need a reliable and efficient debugger to find the bugs. In this paper, we propose an on-chip debug architecture for multicore processors that is easily adaptable and flexible. It is based on the JTAG standard and supports monitoring mode debugging, which is different from run-stop mode debugging. Compared with the debug architecture that supports the run-stop mode debugging, the proposed architecture is easily applied to a debugger and has the advantage of having a desirable gate count and execution cycle. To verify the on-chip debug architecture, it is applied to the debugger of the prototype multicore processor and is tested by interconnecting it with a software debugger based on GDB and configured for the target processor.

• Corrosion Science and Technology
• /
• v.6 no.1
• /
• pp.24-28
• /
• 2007

Alumina coated SiC whiskers were prepared by homogeneous precipitation of aluminum sulfate. The Si3N4 composites reinforced with coated SiC whiskers were fabricated by hot-pressing at $1800^{\circ}C$ for 2 h under an $N_{2}$ atmosphere of 0.1 MPa to examine the effects of coated whiskers on the mechanical properties of SiC whisker reinforced $Si_{3}N_{4}$ composite. By the addition of alumina coated SiC whiskers instead of as received ones, the fracture toughness of composite was about 6.7 $MPam^{1/2}$ which was slightly lower than as received SiC whisker reinforced composite. This result seems to be caused by the fact that the crack deflection and whisker pull-out were decreased. Thus, alumina coated SiC whiskers were considered to form relatively strong interface bond with $Si_{3}N_{4}$ matrix.

• The Journal of Korean Medical History
• /
• v.29 no.1
• /
• pp.11-31
• /
• 2016

Objectives : The goal of this paper is to research what affected diagrams of lung originated from Ming Tang Zang Fu Tu during the time they were changed in. Methods : Diagrams of lung in Traditional Chinese and Japanese medical books had been collected as many as possible. Besides being grouped by Huang Longxiang (黃龍祥)'s classification, they were analysed by 4 form factors, e.g. shape, number, veins and petiole of leafs. Results : Reliability of this methods had been checked on by the correspondence with Huang's 14 standard books, before 29 diagrams of lung were selected from 33 books including 13 books that Huang had already made his proposal. The lobes in most of diagrams resembled 6 lanceolate or long oval leafs, or a maple leaf with 5 indentations. In most of diagrams, veins of leafs were described variously, more or less than 9 nodes often drew in petioles. Conclusions : Suwen (素問), Nan Jing (難經) and Wang Bing would had steadily worked on 29 diagrams of lung, since diagram of lung stemmed from Ming Tang Zang Fu Tu, went out into the world in Zhen Jiu Ju Ying (鍼灸聚英). But they were not drawn through dissection during same periods.

• Proceedings of the KIEE Conference
• /
• 2004.11a
• /
• pp.191-193
• /
• 2004

The composites were fabricated, respectively, using 61vol.% SiC-39vol.% $TiB_2$ and using 61vol.% SiC-39vol.% $ZrB_2$ powders with the liquid forming additives of 12wt% $Al_2O_3+Y_2O_3$ by hot pressing annealing at $1650^{\circ}C$ for 4 hours. Reactions between SiC and transition metal $TiB_2$, $ZrB_2$ were not observed in this microstructure. The result of phase analysis of composites by XRD revealed SiC(6H, 3C), $TiB_2$, $ZrB_2$ and $YAG(Al_5Y_3O_{12})$ crystal phase on the SiC-$TiB_2$, and SiC-$ZrB_2$ composites. The ${\beta}\;{\alpha}$-SiC phase transformation was occurred on the $SiC-TiB_2$, $SiC-ZrB_2$ composites. The relative density, the flexural strength and Young's modulus showed respectively value of 98.57%, 226.06Mpa and $86.37{\times}10^3Mpa$ in SiC-$ZrB_2$ composites.