• Elastomers and Composites
• /
• v.56 no.3
• /
• pp.172-178
• /
• 2021

The wear behavior of styrene-butadiene rubber (SBR) and butadiene rubber (BR) was investigated using a blade-type abrader with a steel blade (SB), Ti-coated tungsten carbide blade (TiB), or zirconia blade (ZB). The wear rate of SBR against SB and TiB decreased with increasing number of revolutions because of the blunting of the blades during wear. However, the wear rate of SBR against ZB remained nearly constant with little blade blunting. Generally, the wear rate of BR was largely unaffected by the blade material used for abrasion. The wear rate and frictional coefficient of SBR were found to be higher than those of BR at similar levels of frictional energy input. A power-law relationship was found between the wear rate and frictional energy input during abrasion. A well-known Schallamach pattern was observed for SBR, while a much finer pattern was observed for BR. The blade material affects the wear rate of the rubbers because the macromolecular free radicals and blade tend to undergo mechano-chemical reactions. The inorganic ZB was found to be the most inert for such a mechanism.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.3
• /
• pp.178-183
• /
• 2021

This paper describes a dynamic spectroscopic ellipsometry based on dual-wavelength calibration. DSE provides ellipsometric parameters at rates above 20 Hz, but the interferometer's sensitivity to temperature makes it difficult for that proposed system to maintain stable 𝜟k over long periods of time. To solve this problem, we set up an additional path in the DSE to perform simulations of the polarization phase calibration method using dual wavelengths. Through simulation, we were able to eliminate most of the polarization phase error and maintain a stable 𝜟k in the long-term stability experiment for 10 hours. This is the result that the 𝜟k stability of the proposed system is improved tens of times compared to the existing system.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.46 no.6
• /
• pp.417-421
• /
• 2020

Objectives: The purpose of this paper is to introduce an effective technique to easily obtain adequate amounts of keratinized gingiva and vestibular depth. Materials and Methods: Free gingiva (vertical height 10 mm) was harvested on the palatal mucosa and a partial thickness flap was elevated on the recipient site with same width as the free gingiva graft. After a conventional suture, a titanium mesh covered the graft and was fixed with miniscrews. Titanium mesh was removed 4.1±2.5 weeks after surgery. The amount of keratinized gingiva and vestibular depth was measured at the final follow-up. Results: Nine patients (males 4, females 5; 53.9±14.1 years) who underwent bone graft surgery before vestibuloplasty were included. No free gingival graft failure or complications were encountered in any of the patients. The relapse rate for vestibular depth (23.3%) was lower than that for keratinized gingiva (48.3%) after 34.4±14.4 months (P=0.010). Conclusion: Vestibuloplasty with a free gingival graft using titanium mesh could be achieved with an acceptable amount of keratinized gingiva and an appropriate vestibular depth around dental implant.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.34 no.3
• /
• pp.181-187
• /
• 2023

Objectives: This study aimed to investigate the correlation between the Comprehensive Attention Test, Korean-Wechsler Intelligence Scale for Children-Fourth Edition, and Attention-Deficit/Hyperactivity Disorder (ADHD) Rating Scale-IV scores in children and adolescents with ADHD. Methods: Fifty-five children and adolescents diagnosed with ADHD and not taking psychiatric medications were included in this retrospective study. A correlation analysis was performed. Results: Although simple visual and auditory selective attention have diagnostic value in traditional continuous performance tests, this study revealed that inhibition-sustained attention and interference-selective attention are also effective in evaluating ADHD. Furthermore, the correlation between the attention and intelligence test scores varied depending on the use of visual or auditory stimuli. Conclusion: The findings of this study contribute to clarifying our understanding of the cognitive characteristics of children and adolescents with ADHD and can be used in future research.

• The Plant Pathology Journal
• /
• v.39 no.1
• /
• pp.136-140
• /
• 2023

Rice panicle blast is one of the most serious diseases threatening stable rice production by causing severe damage to rice yields and quality. The disease is easy to occur under low air temperature and frequent heavy rainfall during the heading season of rice. In 2021, a rice panicle blast severely occurred in the Jeonbuk province of Korea. The incidence area of panicle blast accounted for 27.7% of the rice cultivation area of Jeonbuk province in 2021, which was 13.7-times higher than in 2019 and 2.6-times higher than in 2020. This study evaluated the incidence areas of rice panicle blast in each region of Jeonbuk province in 2021. The weather conditions during the heading season of rice, mainly cultivated rice cultivars, and the race diversity of the Jeonbuk isolates were also investigated. It will provide important information for the effective control of the rice panicle blast.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2020.11a
• /
• pp.1036-1038
• /
• 2020

This paper proposes a novel automated liver segmentation using Multi-Dilated U-Nets. The proposed multidilation segmentation model has the advantage of considering both local and global shapes of the liver image. We use the CT images subject-wise, every 2D image is concatenated to 3D to calculate the IOU score and DICE score. The experimental results on Jeonbuk National University hospital dataset achieves better performance than the conventional U-Net.

• Journal of Powder Materials
• /
• v.30 no.3
• /
• pp.210-216
• /
• 2023

In this study, machine learning models are proposed to predict the Vickers hardness of AlSi10Mg alloys fabricated by laser powder bed fusion (LPBF). A total of 113 utilizable datasets were collected from the literature. The hyperparameters of the machine-learning models were adjusted to select an accurate predictive model. The random forest regression (RFR) model showed the best performance compared to support vector regression, artificial neural networks, and k-nearest neighbors. The variable importance and prediction mechanisms of the RFR were discussed by Shapley additive explanation (SHAP). Aging time had the greatest influence on the Vickers hardness, followed by solution time, solution temperature, layer thickness, scan speed, power, aging temperature, average particle size, and hatching distance. Detailed prediction mechanisms for RFR are analyzed using SHAP dependence plots.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.3
• /
• pp.90-95
• /
• 2023

We describe an optimal alignment method for improving accuracy of dynamic spectroscopic polarimeter based on monolithic polarizing interferometer. The dynamic spectroscopic polarimeter enables real-time measurements of spectral ellipsometric parameters by using a spectral carrier frequency concept. However, the non-polarizing beam splitter used in the monolithic polarizing interferometer cannot maintain the polarization state perfectly due to phase retardation caused by optical anisotropic characteristics of the non-polarizing beam splitter, resulting in degraded measurement accuracy. The effect of the beam splitter can be minimized through optimal alignment of the polarizers used in the polarizing interferometer and the analyzer. We demonstrate how much the proposed alignment method can enhance the measurement accuracy by comparing with previous alignment approach.

• The Journal of Economics, Marketing and Management
• /
• v.11 no.5
• /
• pp.57-67
• /
• 2023

Purpose: An evaluation of Uzbekistan's steps towards competitiveness for FDI globally is presented in this paper. Specifically, the purpose of this paper is to analyze the case of Uzbekistan, and to determine the strategies that can be implemented to increase the competitiveness in attracting foreign investment. Research design, data and methodology: To investigate the FDI environment and identify effective strategies, Global RPM and QSPM analyses were conducted in addition to in-depth interviews with experts. In particular, this study uses the method of Global RPM analysis to make a comprehensive evaluation and analysis on globalization, rationality, and professionalism and morality dimensions of FDI in Uzbekistan. Results: According to the analysis, the conditions of political situation, financial stability, legal frameworks, as well as economic environment of the country play a significant role in bringing in FDIs from abroad. Moreover, based on the results, Uzbekistan scored lowest on globalization, indicating that the country has a low level of integration and openness to the global economy and society. Conclusions: Uzbekistan can boost its productive capacity and GDP growth with FDI, but it has to overcome many structural and logistical obstacles. Furthermore, adhering to the chosen strategies, policymakers can leverage FDI to stimulate economic growth, leading to the generation of new jobs and expanded opportunities in Uzbekistan.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.39 no.4
• /
• pp.204-213
• /
• 2023

Invasive or non-invasive reduction of fractures could be conducted as treatments of traumatic maxillofacial bone fractures. But when suboptimal reduction or malunion of maxillofacial bone fracture occurs, malocclusion could occur as a result of the lost relationship of the mandible and midface. This malocclusion is called post-traumatic malocclusion and orthognathic surgery, orthodontic treatment, selective grinding and prosthetic reconstruction are suggested as treatments for post-traumatic malocclusion after securement of stable TMJ. Stable TMJ is essential for occlusal rehabilitation to prevent occlusal change and relapse of malocclusion. Centric relation and adapted centric posture are suggested as start points of occlusal rehabilitation because they are most stable TMJ position. This case report presents a case in which post-traumatic malocclusion occurred after reduction of panfacial fracture. To rehabilitate full mouth occlusion, selective grinding and prosthetic reconstruction of implant supported fixed prostheses were conducted in centric relation and showed satisfying results in functional and occlusal aspects.