• 대한치과교정학회지
• /
• 제33권3호
• /
• pp.157-167
• /
• 2003

본 연구는 치아크기와 악골크기의 상관관계를 살펴보고자 교정치료경험이 없고 교합이 양호한 87명 (남자49명, 여자38명)의 치아경석고모형과 두부방사선사진을 평가하였다. 치아크기는 치아의 근원심 최대폭경을 디지털 버니어 캘리퍼스를 이용하여 반복 측정하였고 악골의 크기는 기존의 여러 두부방사선계측법에서 이용된 악골의 선계측치를 반복 측정하였다. 치아와 악골크기 모두 성별에 따라 다르게 측정하였다. 치아크기와 악골크기 사이의 상관관계를 알아보기 위해 피어슨 상관관계분석을 실시하였다. 결과는 다음과 같다. 1.성별에 따라 두 군으로 나뒀을 경우 악골크기와 치아크기가 두 군에서 유의성 있게 다르게 나타났다. 2.남자군에서는 상악골과 상악치아 크기는 유의한 상관관계를 보이지만 여자군에서는 상악골과 상악치아 크기는 거의 상관관계를 보이지 않았다. 3. 남자군에서는 상악골의 크기를 나타내는 PTM vert-ANS vert (FH plane)과 PTM vert-A vert (palatal plane)는 모든 상악치아와 유의성 있는 상관관계를 보였으며 상악중절치는 상악골에 관계된 모든 계측치들과 유의성 있는 상관관계를 보였다. 4. 남여 모두에서 하악골의 크기를 나타내는 B vert- Point J vert (mandibular plane)는 하악치아와 유의성 있는 상관관계를 보였다. 위의 결과에서 자연적으로 나타나는 정상교합에서 치아와 악골크기는 상관관계가 낮거나 거의 없음을 알 수 있다.

• 대한방사선치료학회지
• /
• 제11권1호
• /
• pp.6-10
• /
• 1999

The field size can be beam output, therefore MonitorUnit can be varied due to field size dependence The purpose of this study is to evaluate and compare the dose variation according to exchange of collimator The measurements were perfomed with Wellhofer dosimetry system(water phantom. ion chamber. electrometer. system controller. build up cap. etc)and two types of linear accerlerator (Mevatron KD, MevatronMX) Scatter can be affected to field size dependence and scatter correction is separated into collimator and phantom components, scatter components can affect by exchanging of collimator Measurements of collimator scatter factor(Sc) was done in air with build up cap. 1)Square field (5cm2 to 40cm2) was measured 2)and then keeping the upper jaw constant at loom and varing lower jaw from 5cm to 40cm, 3)keeping the lower jaw constant at 10cm and varing upper jaw from 5cm to 40cm Measurements of total scatter factor(Scp) was done in water at Dmax as the procedure of collimator scatter factor measurements in water Dmax The total scatter factors were obtained to the following equation(Sp=Scp/Sc) The measured data is normalized to the data of reference field size($10{\times}10$), rectangular field is inverted to equivalent field to compare three field size data As the collimator setting is varied, the output was changed In conclusion, the error was obtained small but it must be eliminated if we intend to reach the common stated goal of $5\%$ overall uncertainty in dose determination

• Journal of Radiation Protection and Research
• /
• 제44권4호
• /
• pp.156-160
• /
• 2019

Background: To compare the dose of radiation received by the fetus in a pregnant patient irradiated for head and neck cancer using helical tomotherapy and three-dimensional conformal radiation therapy (3DCRT). Materials and Methods: The patient was modeled with a humanoid phantom to mimic a gestation of 26 weeks. Radiotherapy with a total dose of 2 Gy was delivered with both tomotherapy (2.5 and 5.0 cm jaw size) and 3DCRT. The position of the fetus was predicted to be 45 cm from the field edge at the time of treatment. The delivered dose was measured according to the distance from the field edge and the fetus. Results and Discussion: The accumulated dose to the fetus was 1.6 cGy by 3DCRT and 2 and 2.3 cGy by the 2.5 and 5 cm jaw tomotherapy plans. For tomotherapy, the fetal dose with the 2.5 cm jaw was lower than that with the 5 cm jaw, although the radiation leakage was greater for 2.5 cm jaw plan due to the 1.5 fold longer beam-on time. At the uterine fundus, tomotherapy with a 5 cm jaw delivered the highest dose of 2.4 cGy. When the fetus moves up to 35 cm at the 29th week of gestation, the resultant fetal doses for 3DCRT and tomotherapy with 2.5 and 5 cm jaws were estimated as 2.1, 2.7, and 3.9 cGy, respectively. Conclusion: For tomotherapy, scattering radiation was more important due to the high monitor unit values. Therefore, selecting a smaller jaw size for tomotherapy may reduce the fetal dose. however, evaluation of risk should be individually performed for each patient.

• 드라이브 ㆍ 컨트롤
• /
• 제16권2호
• /
• pp.1-7
• /
• 2019

Jaw crusher is a device that breaks rock collected from mines or quarries to produce aggregates of the size desired by user. A representative method for measuring load is to measure them by attaching force sensors directly to the part where the load is generated. However, the direct method has many limitations such as high-impact loads generation in equipment or space constraints, sensor capacities and costs. Therefore, Transfer Path Analysis (TPA) was used to indirectly measure impact loads by attaching acceleration sensors. In this study, both direct and TPA methods were used to measure the impact load of Jaw crusher. This study finally quantifies the impact of the load generated by the Jaw crusher using direct method and TPA method, and comparing the impact load measured calculated the derive the error rate.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제44권4호
• /
• pp.174-181
• /
• 2018

Objectives: The number of patients with medication-related osteonecrosis of the jaw (MRONJ) is increasing, but treatment remains controversial. Published papers and systematic reviews have suggested that surgical treatment is effective in patients with MRONJ. The purpose of this study was to determine whether preoperative University of Connecticut Osteonecrosis Numerical Scale (UCONNS), other serologic biomarkers, and size of necrosis are prognostic factors for outcome of surgical treatment in MRONJ. Materials and Methods: From January 2008 to December 2016, 65 patients diagnosed with MRONJ at the Department of Oral and Maxillofacial Surgery in College of Dentistry, Dankook University who required hospitalization and surgical treatment were investigated. Patient information, systemic factors, and UCONNS were investigated. In addition, several serologic values were examined through blood tests one week before surgery. The size of osteolysis was measured by panoramic view and cone-beam computed tomography in all patients. With this information, multivariate logistic regression analysis with backward elimination was used to examine factors affecting postoperative outcome. Results: In multivariate logistic analysis, higher UCONNS, higher C-reactive protein (CRP), larger size of osteolysis, and lower serum alkaline phosphate were associated with higher incidence of incomplete recovery after operation. This shows that UCONNS, CRP, serum alkaline phosphate, and size of osteolysis were statistically significant as factors for predicting postoperative prognosis. Conclusion: This study demonstrated that CRP, UCONNS, serum alkaline phosphate, and size of osteolysis were statistically significant factors in predicting the prognosis of surgical outcome of MRONJ. Among these factors, UCONNS can predict the prognosis of MRONJ surgery as a scale that includes various influencing factors, and UCONNS should be used first as a predictor. More aggressive surgical treatment and more definite surgical margins are needed when the prognosis is poor.

• 한국양식학회지
• /
• 제12권4호
• /
• pp.309-315
• /
• 1999

In order to understand the initial feeding time of larvae red marbled rockfish, Sebastiscus tertius changes of mouth size were investigated. Also, the fecundity of different size of red marbled rockfish broodstocks was measured. The broodstocks of red marbled rockfish, S. terius of $32.3\pm6.52 cm$ and larger than 45cm in total length spawned 296,648 and 600,000 larvae, respectively. About 50% was normal healthy larvae among the spawned ones. Mouth sizes calculated by the angle mouth opening and upper jaw length for newly spawned red marbled rockfish larvae were 0.263, 0.197 and 0.132 mm at D, 0.75D and 0.5D, respectively, when the upper jaw length was 0.186mm. Thereafter, 20 days old larvae showed 0.822, 0.617 and 0.411 mm in calculated mouth length at D, 0.75D and rockfish larvae grows, their upper jaw length gradually increased. 2 days old red marbled rockfish larvae possibly stated to feed rotifers and lasted their feeding for the another 35days, relatively long periods compared with other larvae fish. And 25 days old larvae possibly fed the newly hatched Artemia nauplii and lasted their feeding for the another 20 days, like other larvae fish. The proper supplying time of artificial feeds for the red marbled rockfish larvae seemed to be around 10 days after spawning.

• 로봇학회논문지
• /
• 제10권4호
• /
• pp.193-199
• /
• 2015

This paper dealt with a pincers-type gripper being able to grip a heavy-weighted cylindrical object having various size with itself. This gripper should be designed to seize the objects without any change of jaw shape. Grasping achieved equilibrium after the object slipped on the jaw while grasping it. To cope with this situation, we suggested the slip considered gripper design procedure based on grasping equilibrium. The obtained slip condition can provide a limit friction coefficient depending on the contact angle when initiating contact between jaw and object. Consequently, the gripping force and the required actuating force can be calculated. In order to verify the proposed slip condition, the simulations were performed using a dynamic software.

• 대한방사선치료학회지
• /
• 제30권1_2호
• /
• pp.73-81
• /
• 2018

목 적 : 다발성 뇌 전이의 방사선치료 시 jaw tracking(JT)과 fixed jawFJ)를 이용한 용적세기조절회전치료(Volumetric Modulated Arc Therapy, VMAT)를 비교하고 유용성을 평가하고자 한다. 대상 및 방법 : JT를 이용하여 치료받은 다발성 뇌 전이(Multiple Brain Metastasis) 환자 중 6개 이상의 종양이 있고 조사면 크기가 $14{\times}14cm^2$ 이상인 환자 10명을 대상으로 하였다. Eclipse(Ver 13.6 Varian, USA)로 JT와 FJ의 전산화치료계획을 각각 수립하였으며, 전자포털영상장치(Electronic Portal Imaging Device, EPID)를 이용하여 감마지수(Gamma Index, 3 mm, 3 %, 95 % 신뢰구간) 및 최대선량차이(Max. Dose Difference)를 측정하였다. 또한 손상위험장기(Organ At Risk, OAR)의 $D_{max}$ 및 $D_{mean}$을 산출하고 비교하였으며 처방선량지수(Conformity Index, CI), 선량균질지수(Homogeneity Index, HI)를 평가하였다. 결 과 : JT와 FJ의 측정값을 평가한 감마지수는 모든 Case에서 허용 기준(3 mm, 3 %, 95 % 신뢰구간)에 충족하였으며, 최대선량차이값은 Leaf End Transmission이 발생하는 영역에서 시계방향(Clockwise, CW)은 최대 98.4 %, 평균 43.6 %, 반시계방향(Counter-Clockwise, CCW)은 최대 67.9 %, 평균 41.0 %로 측정되었다. 손상위험장기는 JT를 사용하였을 때 각 정상장기에 대한 $D_{max}$의 최대값은 15.36 %~74.59 %, 평균값은 2.84 %~39.80 % 감소, $D_{mean}$의 최대값은 27.90 %~65.23 %, 평균값은 7.70 %~41.71 %로 감소하였으며, 처방선량지수와 선량균질지수값은 차이가 없었다. 결 론 : 다발성 뇌 전이에서 VMAT으로 치료할 경우 JT를 이용하면 치료계획용적(Planning Target Volume, PTV)의 선량분포에 영향을 미치지 않으면서 불특정 영역에서 발생하는 방사선의 누설 및 투과로 인한 불필요한 피폭을 감소시키고 정상장기에 더 낮은 선량으로 방사선치료가 가능할 것으로 사료된다.

• 대한치과교정학회지
• /
• 제30권6호
• /
• pp.699-712
• /
• 2000

림프조직은 비인두 부위에서 Waldeyer's ring의 일부조직으로 tonsil을 이루며 정상적으로 존재한다. 이러한 림프조직이 임상적인 증상을 나타낼 정도로 과증식한 것을 'Adenoid vegetation or Adenoids'라고 이른다. 아데노이드는 일반적으로 유년기에 발생하며 $2\~12$세때 특징적인 증상을 보인다. 사춘기시기에 이르면 절대적인 아데노이드 크기 감소와 주변의 비인두의 성장으로 인한 상대적 크기 감소가 나타난다. 그리하여 성인이 되면 아데노이드는 퇴화된 상태로 변하게 된다. 아데노이드는 구호흡의 주요한 원인 중 하나이며, '아데노이드 얼굴'이라는 특징적인 안면형태를 야기한다고 알려져 있다. 아데노이드에 의한 구호흡이 안면 형태와 치열에 영향을 미칠 수 있다는 주장은 오래 전부터 제기되고 있으나, 여러 가지 복합적인 원인으로 이들간의 상호연관정도를 정확히 알기가 어려웠다. 이에 본 연구에서는 정상 교합 아동에서의 골 연령에 따라 아데노이드와 악골 크기의 정상치와 성장변화량을 제시하고 이들간의 상관관계를 알아보았으며 다음과 같은 결과를 얻었다. 1. 골 연령에 따른 남녀별 계측항목의 평균과 표준편차를 얻었다. 2. 같은 골연령을 비교시 남자는 여자보다 약 2년 가량 성장속도가 느렸다. 3. 비인두의 height과 depth는 남자에서는 CVMI 1과 2 때 많은 성장을 보이고, CVMI 4 이후에서는 성장을 보이지 않았으며, 여자에서는 모든 골 연령에서 유사한 정도의 성장이 나타났다. 4. 비인두의 상대적 면적은 남자에서 CVMI 1에서 2로 이행되는 시기에 유의한 증가를 보였다. 5. 비기도의 상대적 면적과의 상관분석에서 남녀 모두에서 아데노이드 항목중에서는 Ad2와 관련된 항목과 uppe pharynx가 높은 상관관계를 보였으며, 치열궁과 관련된 항목중에는 상$\cdot$하악의 견치간 너비, 상악의 대구치간 너비, 구개정 높이가 상관관계가 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1613-1616
• /
• 2007

A microgripper using thermal actuator and SU-8 polymer was designed and fabricated to manipulate cells and microparts. A chip size of a microgripper was 3 mm ${\times}$ 5 mm. The thermally actuated microgripper consisted of two couples of hot and cold arm actuators. The high thermal expansion coefficient, 52 $ppm/^{\circ}C$, of SU-8 compared to silicon and metals, allows the actuation of the microgripper. Thickness and width of SU-8 as an end-effector were 26 ${\mu}m$ and 80 ${\mu}m$, respectively. Initial gap between left jaw and right jaw was 120 ${\mu}m$. The ANSYS program as FEM tool was introduced to analyze the thermal distribution and displacement induced by thermal actuators. $XeF_2$ gas was used for isotropic silicon dry etching process to release SU-8 end-effector. Mechanical displacements of the fabricated microgripper were measured by optical microscopy in the range of input voltage from 0 V to 2.5 V. The maximum displacement between two jaws of a microgripper Type OG 1_1 was 22.4 ${\mu}m$ at 2.5 V.