• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.3
• /
• pp.380-386
• /
• 2013

This paper represents an adaptive beamforming technique to suppress interference or jamming signals in wideband. In order to maintain low side lobe level(SLL) at an antenna element level, Taylor-weighting was used. Also, to make a nulling beam pattern toward jammer's directions in wideband, we used the modified Loaded Sample Matrix Inversion(LSMI) algorithm and Tapped Delay Line(TDL). To verify the proposed algorithm, we applied it to a rectangular array antenna. Finally, the results show beam pattern with low SLL and jammers suppression.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.8
• /
• pp.837-845
• /
• 1992

This paper shows the performance of FH /BFSK communication systems under worst case Jamming interference. The channel Is modeled with ratio-threshold technique, and as a lamming signal the tone Jamming and Gaussian Jamming are used. The performance is analyzed by using the channel capacity which is the code rate and bit signal-to-Jammer ratio, and we show that the performance degration becomes large as background noise Is big and obtain the best performance when the threshold level f is about 1.5.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.9
• /
• pp.757-763
• /
• 2013

This study discusses the multiple knife-edge diffraction loss with the receiver and jammer located in the Seoul metropolitan northwestern region. The considered positioning and jamming signals are the GPS L1 C/A signal and several jamming signals such as the wideband Gaussian noise, matched spectrum, and continuous wave signals. To calculate the accurate diffraction effects, the 3-dimensional topography data at the Seoul metropolitan northwestern region was used.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.2 s.25
• /
• pp.96-102
• /
• 2006

In this paper, the design, construction and basic characteristics of an electronically adaptive array antenna for the GPS receiver is described. The susceptibility of the GPS signals to the interference is of concern to the GPS user community. Because of the low received power of the GPS signals, outages can easily occur due to the unintentional interference and the easily obtainable low cost GPS jammer denying access to the GPS signals. We propose a technique of the adaptive array antenna that detects the GPS interference sources and controls the null beam pattern only toward the jamming sources to acquire GPS navigation data after acquisition and tracking of the GPS signals.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.1
• /
• pp.119-126
• /
• 2002

본 논문에서는 chirp 변조를 이용한 통신 시스템의 LPI(low probability of intercept)와 AJ(anti-jamming)성능을 분석하였다. 인터셉터에 DAM(delay and multiplier)과 SC(squaring circuit)가 이용된 경우 CBPSK(Chirped BPSK)의 LPI 성능을 분석하였다. 스펙트럼 확산 방식의 CBPSK와 DS/BPSK 시스템에 대한 AJ 성능을 비교 분석 및 주파수 호핑 방식의 FH/CBFSK(Chirped BFSK)와 FH/BFSK, 그리고 FH/BCM(Binary Chirp Modulation) 시스템에 대한 AJ 성능을 분석하였다. LPI 결과로, CBPSK(Chirped BPSK)은 chirp 변수인 chirp 주기($T_3$가 커질수록 좋은 LPI 성능을 보인다. AJ 결과로, PBNJ(partial band noise jammer)환경에서 CBPSK 방식이 DS/BPSK 방식에 비하여 AJ 성능이 우수하고, 마찬가지로 FH/CBFSK 방식이 FH/BFSK 방식에 비하여 AJ 성능이 우수함을 시뮬레이션으로 확인하였다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.6
• /
• pp.729-737
• /
• 2012

In case that multiple jammers are transmitting the signals which are the same type a general algorithm based on TDOA method cannot estimate the positions of multiple jammers because there are many TDOA measurements including true and false values. This paper, therefore, designs a new algorithm based on TDOA method to localize multiple jammers. In this algorithm, TDOA measurements are obtained by rotating the reference sensor, and then the positions of multiple jammers can be estimated by detecting congregated point among the multiple estimated positions from TDOA measurements. Through computer simulations, it is verified that this algorithm localizes the multiple jammers well. The performance of the algorithm are also analysed by changing the distance between sensors and jammer, and sampling frequency.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.5
• /
• pp.910-916
• /
• 2010

A modern artillery use a FMCW Proximity Fuze for effectively target destruction. FMCW Proximity Fuze can be deceived by Jamming Technique because it uses RF for distance estimation. FMCW Proximity Fuze algorithm is similar to FMCW radar's, but normal Jamming Tech. like Noise and Mulitone is useless. Most Shots with FMCW Proximity Fuze have a additional mechanical fuze against RF Jamming. Shots explode by mechanical fuze when Proximity Fuse is Jammed. However, distance Deception is available because shots can not distinguish between deception jamming signal and ground reflected signal. For making Distance Deception Jamming, FMCW signal tracking is demanded. In this paper, we propose a FMCW tracking method and develop the Jammer to show Jamming signal.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.7
• /
• pp.3333-3350
• /
• 2019

The smart jammer launches jamming attacks which degrade the transmission reliability. In this paper, smart jamming attacks based on the communication probability over different channels is considered, and an anti-jamming Q learning algorithm (AQLA) is developed to obtain anti-jamming knowledge for the local region. To accelerate the learning process across multiple regions, a multi-regional intelligent anti-jamming learning algorithm (MIALA) which utilizes transferred knowledge from neighboring regions is proposed. The MIALA algorithm is evaluated through simulations, and the results show that the it is capable of learning the jamming rules and effectively speed up the learning rate of the whole communication region when the jamming rules are similar in the neighboring regions.

• Journal of Positioning, Navigation, and Timing
• /
• v.7 no.4
• /
• pp.227-233
• /
• 2018

The purpose of satellite navigation meaconing jamming is to make the target GPS receiver calculate false navigation by meaconing the received satellite signals. At this time, since the received and transmitted signals have the same frequency, the back-lobe reduction level of antenna should be -160 dB when the Effective Radiated Power (ERP) is 1 Watt (30 dBm). Therefore, meaconing jamming is impossible by merely reducing the back-lobe level of antenna when the transmitter and receiver are in proximity to each other. In general, the transmitter and receiver are isolated by the time division method to eliminate such transmission/reception interference. This paper studied the optimal switching timing between transmitting and receiving when isolating the time division transmission and reception for GPS meaconing jamming.

• Journal of Positioning, Navigation, and Timing
• /
• v.8 no.2
• /
• pp.41-47
• /
• 2019

Recently, number of intentional jamming has increased significantly. If GNSS jammers are activated, user receivers can be largely influenced due to the vulnerable characteristic of the GNSS (Global Navigation Satellite System) signal. When the reception power of the jamming signal and that of the navigation signal are similar, the C/A (Coarse Acquisition) chip delay error can occur in the delay locked loop. To evaluate the jamming effect, a new measurement model is formulated based on previous research works. The new model explains how the jamming to signal ratio affects the ranging measurement accuracy and other parameters. To evaluate the validity of the newly formulated model, the experiment results of the previous research works under actual jamming environment are utilized. By evaluating the consistency of the carrier-to-noise ratio (C/N0) and the position error with the actual jamming environment, the validity of the newly formulated model is verified.