• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1172-1175
• /
• 2004

포항 방사광 가속기의 선형가속기는 2.5GeV 전자빔용 마이크로웨이브의 발생을 위하여 80 MW급 클라이스트론(klystron) 11대와 입사부용 65 MW 급 클라이스트론 1대를 사용한다. 80 MW 급 클라이스트론 부하를 구동하기 위하여 최대 펄스 정격출력 200MW(400kV, 500A, 평탄도 $4.4\;{\mu}s$)인 대출력 펄스 전원공급 장치(modulator)가 요구된다. 모듈레이터 시스템 용 PFN(pulse forming network) 커패시터의 충전용 입력전원으로써 최대 출력전압 50 kV, ${\pm}\;0.5\%$ 이내의 전압제어가 가능한 고전압 인버터 전원장치를 적용하여 PLS 선형가속기용 국산화 개발 클라이스트론 부하의 성능시험을 수행하였다. 국산화 개발된 S-band 펄스 클라이스트론은 고전압 길들이기 과정을 거쳐 최대 정격 출력 빔 전압 400 kV 이상까지 시험 완료하였다. 클라이스트론의 정확한 RF 출력성능의 측정을 위하여 방향성 결합기와 검파기를 설치하여 측정시스템의 성능을 개선하였다. 본 논문에서는 포항 방사광 가속기의 국산화 개발 1호 클라이스트론 부하의 성능시험을 위한 50 kV 급 인버터시스템 적용과정에서 수행하였던 시험장치 개선과 PFN의 충전 특성을 분석하였다. 또한, 클라이스트론의 고전압 및 RF 길들이기 시험 결과에 관하여 고찰하고자 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1067-1069
• /
• 2004

22.9[kV]/50[MVA]/30[m] HTS transmission power cable has been developed and tested at Korea Electrotechnology Research Institute and LG Cable Company by 21 century center for applied superconductivity technology. It is necessary to measure of critical current degradations, AC loss, insulation test and etc at the HTS cable development. This paper is analyzed characteristics that critical current of HTS cable bending condition according to this paper. We will be able to decide the diameter of drum which HTS cable is wound around and minimum curvature radius of HTS cable from results of this research.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.244-247
• /
• 2004

The electrical insulating design is important to realize a HTS power cable because the cable is operated under the high voltage environment. For the insulation design of a HTS power cable, it is necessary to investigate the AC, impulse breakdown and partial discharge(PD) inception stress of liquid nitrogen/LPP composite insulation system. Based on these results, the electrical insulation of a HTS power cable is designed and Mini-model cables are manufactured. The manufactured Mini-model cables are evaluated that AC, impulse withstand voltage, breakdown and partial discharge inception stress and analyzed characteristics insulation of HTS cable bending condition according to this paper. From these tests, the AC, impulse withstand voltage test and partial discharge inception stress is satisfied "standard technical specification of KEPCO" in Korea and the breakdown voltage was 120kV.

• E2M - 전기 전자와 첨단 소재
• /
• 제7권6호
• /
• pp.481-489
• /
• 1994

The $SnO_2$/(n)Si solar cell was fabricated by electron beam evaporation method, and their properties were investigated. In proportion to increase of substrate and annealing temperature, the conductivity of $SnO_2$ thin film was increased, but its optical transmission decreases because of increasing optical absorption of free electrons in the thin film. $SnO_2$/Si Solar cell characteristics were improved by annealing, but the solar cells was deteriorated by heat treatment above 500[.deg. C]. The optimal outputs of $SnO_2$/Si solar cell through above investigations were $V_{\var}$:350[mV], $J_{sc}$ ;16.53[mA/c $m^{2}$], FF;0.41, .eta.=4.74[%]

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.813-815
• /
• 1992

Accurate Capacitance-Voltage characteristics of Metal-Insulator-Semiconductor (MIS) devices in narrow band-gap semiconductors are presented. The unique band structure of narrow band-gap semiconductors is taken into account such as non-parabolicity and degeneracy. Compensated and partially ionized impurities either in the bulk or the space charge region are also considered. HgCdTe is a defect semiconductor, so this approach is very important for characterization and analysis of MIS devices.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.737-739
• /
• 1992

The microstructure and humidity sensitive characteristics of $V_2O_5$ doped $CaTiO_3$ were studied. Sensing elements were prepared in bulk form. This element exhibits a porous structure. The grain grows and electrical conductivity increases as doping amount of $V_2O_5$ increases. The change of impedance and capacitance under different r.h is remarkable, and the conduction carriers of this element were ions.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1993년도 춘계학술대회 논문집
• /
• pp.129-133
• /
• 1993

$TiO_2-V_2O_5-Nb_2O_5$ humidity sensors have been fabricated in the ceramic type and their physical and hygroscopic characteristics have been investigated. The additives and sintering conditions affect the humidity sensitivity. XRD patterns, SEM photographs were used for the analysis of crystal structures and surface morphology. $TiO_2-V_2O_5-Nb_2O_5$ humidity sensors had good linearity in the range from 20%RH to 90%RH and the sensitivity of sensor sintered at $1,000^{\circ}C$ for 1hr was 73% at operating temperature $60^{\circ}C$.

• Nuclear Engineering and Technology
• /
• 제47권2호
• /
• pp.212-218
• /
• 2015

We describe a comparative analysis of different tools used to assess safety-critical software used in nuclear power plants. To enhance the credibility of safety assessments and to optimize safety justification costs, $Electricit{\acute{e}}$ de France (EDF) investigates the use of methods and tools for source code semantic analysis, to obtain indisputable evidence and help assessors focus on the most critical issues. EDF has been using the PolySpace tool for more than 10 years. Currently, new industrial tools based on the same formal approach, Abstract Interpretation, are available. Practical experimentation with these new tools shows that the precision obtained on one of our shutdown systems software packages is substantially improved. In the first part of this article, we present the analysis principles of the tools used in our experimentation. In the second part, we present the main characteristics of protection-system software, and why these characteristics are well adapted for the new analysis tools. In the last part, we present an overview of the results and the limitations of the tools.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.231-234
• /
• 1998

The soft reverse recovery characteristics of P-I-N power diodes by different lifetime killer were compared in this paper. It was concluded that the best local lifetime control at N- base was achieved through the optimization of penetrated depth into the wafer by 5 MeV proton irradiation, resulting in significant soft recovery performance in our study. The results of 5∼12 MeV electron irradiation and platinum diffusion were also discussed here.

• Applied Microscopy
• /
• 제12권2호
• /
• pp.23-33
• /
• 1982

The parotid glands of squirrels(Tamias sibiricus asiaticus) were observed by the electron microscope. According to the characteristics of secretory granules and the morphology of cell organelles, the acinar cells could be distinguished into five types of cells(Type I , Type II, Type III, Type IV and Type V cell). Among these, Type III, Type IV and Type V cell were not identified up to date. The morphologic characteristics of the intercalated and striated ducts were the appearance of numerous long slender mitochondria which are located between the numerous basal infoldings, and the epithelium were consisted of light and dark cells. The desmosomes were also observed, and could not found the secretory granules in the cytoplasm of the both epithelium.