• Geomechanics and Engineering
• /
• v.21 no.6
• /
• pp.503-511
• /
• 2020

This study evaluated the side resistance of drilled shafts socketed into rock sections. Commonly used analysis methods for side resistance of piles in rocks are examined by utilizing a large number of load test data. The analysis of the unit side resistance of pile foundations embedded into rock sections is based on an empirical coefficient (α) and the uniaxial compressive strength (q_u) or its root (${\sqrt{q_u}}$). The Davisson criterion was used to interpret the resistance capacity from the load test results to acquire the computed relationships. The α-${\sqrt{q_u}}$ relationship is proven to be reliable in the prediction of friction resistance. This study further analyzed the relationship by including the effect of rock quality designation (RQD) on the results. Analysis results showed that the analysis model of α-${\sqrt{q_u}}$-RQD provided better prediction and reliability considering the RQD classification. Based on these analyses, the side resistance of drilled shafts socked into rocks is provided with statistical data to support the analysis.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.11
• /
• pp.1207-1214
• /
• 2014

Under excessive plasticity, the fracture toughness of a material depends on its size and geometry. Under fully yielded conditions, the stresses in a material near its crack tip are not unique but rather depend on the geometry. Therefore, the single-parameter J-approach is limited to a high-constraint crack geometry. The JQ theory has been proposed for establishing the crack geometry constraints. This approach assumes that the crack-tip fields have two degrees of freedom. In this study, the crack-tip stress field of a fully circumferential surface-cracked pipe under combined loads is investigated on the basis of the JQ theory by using finite element analysis. The combined loads are a tensile axial force and the thermal gradient in the radial direction. Q-stresses of the crack geometry and its loading state are used to determine the constraint effects. The constraint effects of secondary loading are found to be greater than those of primary loading. Therefore, thermal shock is believed to be the most severe loading condition of constraint effects.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.28 no.6
• /
• pp.62-76
• /
• 2001

This study is to offer the basic information and materials for the restoration of the urban forest and the ecologically healthy and continuous green belt through the investigation and the analysis on the vegetation in Hwasan Park, Chonju-City. The flora of Hwasan Neighborhood park was composed of 86 families 230 genera, 261 species, 35 varieties, 1 formae or 298 Taxa. Among them, calculation of Pte-Q Index represented 0.60, Fisher's Index. Some characteristics of the plants in this area have represented such as Th-D1-R5 type in biological type, erect form(64.6%) in growth type, 30 taxa in naturalized plants. The life form spectra investigated from Hwasan neighborhood park was recognized as the following M"17.4%, N:11.4%, E:0.3%, Ch:0%, H:29.8%, G:6.7%, HH:0%, Th:34.2%. By the Z-M method 5 plant communities and 3 afforestation were recognized; Quercus variabilis community, Q.acutissima community, Q.serrata community, Sorbus alnifolia community, Pinus densiflora community, P.rigida afforestation, Robinia pseudo-acacia afforestation and Larix leptolepis afforestation. The actual vegetation map constructed on the grounds of the communities classified and other data. The pattern of successional trend of tree species might be suggested: L. leptoleipis, P. rigida and P. densifloralongrightarrowQ.variabilis and Q.acutissimalongrightarrowS.alnifolia and Q.serratalongrightarrowCarpinus tschonoskii community. Three measurements of species diversity (richness index(SR), Shannon-Wiener index(H'), evenness index(J')) and their relationship with community type were studied in the surveyed plant communities. Q.serrata community was higher in SR, H', J' than the other communities, whereas R.pseduo-acacia afforestation was low. Finally, The vegetation of the Hwasan neighborhood park must not allowed any more. Nothing ca be better than native states in preserving the ecosystems.tems.

• Korean Journal of Agricultural Science
• /
• v.50 no.2
• /
• pp.165-180
• /
• 2023

This study investigated 62 nested quadrat plots of Jinaksan to identify community classification and changes of the vegetation by using the phytosocial method and analyzed importance values. Vegetation types were classified into 8 communities: Quercus mongolica community, Q. variableis community, Q. aliena community, Pinus densiflora, Q. acutissima, Zelkova serrata, Carpinis laxiflora, and C. tschonoskii. The significance value was highest in Q. mongolica (62.75) followed by P. densiflora (55.16), Q. variabilis community (25.03), Z. serrata (22.17), Q. aliena (18.30), Prunus serrulata var. pubescens (16.86), C. laxiflora (13.25), Q. acutissima (10.72), C. tschonoskii (10.08), Q. serrata (8.02), Fraxinus sieboldiana (6.93), Acer pseudosieboldianum (6.73), and Styrax obassis (5.73). Quercus mongolica displayed a stable distribution pattern, presenting a reverse J-shaped curve from the diameter at breast height (DBH) analysis, and it was judged that current state would be maintained for a certain period. In addition, P. densiflora is expected to dominate for the time being and Quercus species are expected to gradually decrease.

• Journal of the Korean Society for Heat Treatment
• /
• v.32 no.6
• /
• pp.270-274
• /
• 2019

In this study, simulation structure analysis was performed for the differential gear system for passenger cars as a prerequisite for the design of the balancing module. The differential gear system was modeled by using CATIA and simulation structure analysis was performed using ANSYS software. The material of the modeled differential gear system uses the mechanical properties of S45C (Q&T). In the structural analysis of the differential gear, the areas where the maximum stress and the maximum strain occurred can be identified. The maximum stress and maximum strain occurred in the pitch circle of the bevel gear. In evaluating the safety factor, it was found that sufficient safety factor was secured. Based on the analysis results for the differential gear, it is expected that it will be a good reference if we design the balancing module device.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.1 s.232
• /
• pp.107-114
• /
• 2005

In order to analyze the elastic-plastic fracture behavior of a structure, the fracture resistance curve of the material should be known first. The standard CT specimen was used to obtain the fracture resistance curves of a piping system. However, it is known that the fracture resistance curve by the standard CT specimen is very conservative to evaluate the integrity of a structure. Also the fracture resistance curve is effected by the specimen geometry and the dimensions because of the constraint effect. The objective of this paper is to be certain the conservativeness of the fracture resistance curve by the standard CT specimen and to provide an additional safety margin. For these, the fracture tests using a real pipe specimen and the standard CT specimen test were performed. A 4-point bending jig was manufactured for the pipe test and the direct current potential drop method was used to measure the crack extension and the length for the pipe test. Also finite element analyses were performed with a CT specimen and a pipe in order to prove the additional safety margin. From the result of tests and analyses of the pipe and the standard CT specimen, it was observed that the fracture analysis with the standard CT specimen is conservative and the additional safety margin was proved.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.23 no.1
• /
• pp.89-104
• /
• 2021

Based on the TF-IDF weighted value that evaluates the importance of words that play a key role, the semantic network analysis(SNA) was conducted on the self-introduction letter of freshman at Korea National College of Agriculture and Fisheries(KNCAF) in 2020. The top three words calculated by TF-IDF weights were agriculture, mathematics, study (Q. 1), clubs, plants, friends (Q. 2), friends, clubs, opinions, (Q. 3), mushrooms, insects, and fathers (Q. 4). In the relationship between words, the words with high betweenness centrality are reason, high school, attending (Q. 1), garbage, high school, school (Q. 2), importance, misunderstanding, completion (Q.3), processing, feed, and farmhouse (Q. 4). The words with high degree centrality are high school, inquiry, grades (Q. 1), garbage, cleanup, class time (Q. 2), opinion, meetings, volunteer activities (Q.3), processing, space, and practice (Q. 4). The combination of words with high frequency of simultaneous appearances, that is, high correlation, appeared as 'certification - acquisition', 'problem - solution', 'science - life', and 'misunderstanding - concession'. In cluster analysis, the number of clusters obtained by the height of cluster dendrogram was 2(Q.1), 4(Q.2, 4) and 5(Q. 3). At this time, the cohesion in Cluster was high and the heterogeneity between Clusters was clearly shown.

• Korean Journal of Environment and Ecology
• /
• v.32 no.5
• /
• pp.513-531
• /
• 2018

This study compared forest vegetation in Chungcheongnam-do Provincial Park (Deogsan, Chilgabsan, and Daedunsan) from 2006 to 2016. The results of the analysis on the vegetation of the research sites by the phytosociological method showed that the Deogsan Provincial Park had Quercus mongolica community, Pinus densiflora community, Q. variabilis community, and Zelkova serrata community. Chilgabsan Provincial Park had Q. variabilis community, Q. mongolica community, P. densiflora community, and Carpinus laxiflora community. Daedunsan Provincial Park had Q. mongolica community, Q. variabilis community, Q. serrata community, C. tschonoskii community, C. laxiflora community, P. densiflora community, and Q. acutissima community. The importance value in each Provincial Parks was analyzed as follows. The importance value of Q. mongolica(72.35) was the highest in Deogsan Provincial Park, and followed by P. densiflora(70.25), Q. variabilis(53.11), Styrax japonicus(11.44), Prunus sargentii(11.17), and Fraxinus rhynchophylla(10.41). Q. variabilis(73.34) was the highest in Chilgabsan Provincial Park and followed by, P. densiflora(58.71), Q. mongolica(57.02), C. laxiflora(18.84), Q. serrata(13.48), and Prunus sargentii(13.31). The importance value of Q. mongolica(57.03) was the highest in Daedunsan Provincial Park and followed by Q. variabilis(31.98), Q. serrata(31.53), P. densiflora(16.80), C. tschonoskii(16.50), C. laxiflora(16.07), S. obassia(15.76), and Acer pseudosieboldianum(10.09). The results of DBH analysis of the major species having the high importance value showed the normal density distirbution of Q. mongolica, and Q. variabilis in Deogsan Provincial Park, so the dominance status of these species is likely to continue. Q. variabilis, Q. mongolica, and P. densiflora in Chilgabsan Provincial Park showed the normal density distribution showed the density of normal distribution, so the dominance status of these species is likely to continue. However, the dominance status of C. laxiflora, and Q. serrata is likely to be expanded in the future due to the high density of young individuals. Q. mongolica, and Q. variabilis in Daedunsan Provincial Park showed the density of reverse J-shaped curve, so the dominance status of these species is likely to continue, and C. tschonoskii, and P. densiflora had a formality distribution, suggesting continuous domination of these species over the other species for the time being. Additionally the dominance status of C. laxiflora, and Q. serrata is considered to be expanded in the future due to the high density level of young individuals.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.3
• /
• pp.225-231
• /
• 2004

Disturbance observer (DOB) has been studied extensively and applied to many motion control fields during the last decades, but relatively few studies have been devoted to the development of analytic, systematic design methods for DOB itself, This paper thus aims to provide an analytic, systematic design method for DOB. To do this, DOB is structurally analyzed and the generalized disturbance compensation framework named robust internal-loop compensator (RIC) is introduced. Through this, the inherent equivalence between DOB and RIC is found, and the mixed sensitivity optimization problem of DOB is solved. Q-filter design is completely separated from the mixed sensitivity optimization problems of DOB although the proposed method has implicit .elation with Q-filter. Also, although the Q-fille. is separately designed with sensitivity function, the proposed DOB framework has the exactly same characteristic as the original DOB.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2002.11b
• /
• pp.68-68
• /
• 2002

아열대성 식물 4종 (문주란, Crinum asiaticum var. japonicum; 박달목서, Osmanthus insularis; 죽절초, Chloranthus glaber; 파초일엽, Asplenium antiquum)을 대상으로 자연 환경요인의 변화에 따른 엽록소형광을 분석하여 이들 식물의 활력도를 검토하였다. 여름철 일변화에 있어서 양지에 자라는 문주란과 박달목서는 Fv/Fm이 새벽과 밤에는 0.80~0.83 범위의 높은 값을 보이지만, 낮시간에는 0.65~0.73으로 낮았다. 1-qN과 1-qP도 낮시간에 크게 낮아졌다. 음지에 자라는 죽절초와 파초일엽의 Fv/Fm은 높아서 0.83~0.85 범위를 유지하였으며 일변화적 특성은 관찰되지 않았다. 1-qP의 변화는 거의 관찰되지 않았으나 1-qN이 낮시간에 다소 감소하는 경향을 보여주었다. 죽절초와 파초일엽에서는 광억제가 거의 일어나지 않으나 문주란과 박달목서에서는 낮시간의 고광에 의한 광억제가 나타난다. 하지만 여기에너지의 일부를 열의 형태로 방출하여 광피해를 완화시키고 있는 것으로 보인다. 겨울철에는 Fv/Fm이 모든 종에서 0.8 이하의 값을 나타내었는데, 특히 문주란의 Fv/Fm 값은 다른 3종 보다 더 낮았다. 그리고 모든 종에서 일변화적인 특성은 관찰되지 않았다. 문주란의 1-qN은 낮시간에 다소 감소하였지만, 나머지 3종의 식물은 높은 값을 나타내었다. 그리고 l-qP는 문주란과 박달목서에서는 낮시간에 0.6 범위로 낮아졌다. 이는 종에 따라 차이가 있지만 겨울철 저온의 영향을 받은 결과로 보인다. 한편, 여름철 문주란과 박달목서의 O-J-I-P곡선은 거의 유사하며 낮에 뚜렷하게 낮았고, 죽절초와 파초일엽에서는 일변화적 특성은 두드러지지 않았다. 그리고 P $I_{NO}$ 와 SF $I_{NO}$ 가 죽절초를 제외한 3종에서 여름철 낮시간에 증가하였다. 겨울철의 O-J-I-P곡선은 모든 종에서 낮시간에 다소 낮아지지만 큰 변화는 없었다. 그리고, 문주란, 박달목서, 파초일엽에서 $\psi$o/(1-$\psi$o)가 낮시간에 다소 증가하였다. 이로부터 P $I_{NO}$ , SF $I_{NO}$ , $\psi$o/(1-$\psi$o)등의 변수는 식물의 활력도를 검정하는 지표로 활용될 가능성이 높다고 할 수 있다.