• Food Science and Preservation
• /
• v.16 no.5
• /
• pp.636-643
• /
• 2009

Inactivation by UV-C irradiation of Escherichia coli O157:H7 and Listeria monocytogenes inoculated onto washed carrots was examined. Carrot samples were inoculated with 6-7 log CFU/mL of E. coli O157:H7 or L. monocytogenes, treated with doses of 0, 1, 3, 5, or $10\;kJ/m^2$ UV-C, and stored at $4{\pm}1^{\circ}C$ for 8 d. The populations of E. coli O157:H7 and L. monocytogenes significantly decreased with increasing irradiation dose (p<0.05). In particular, E. coli O157:H7 and L. monocytogenes populations fell significantly by 2.35 and 2.38 log CFU/g at $10\;kJ/m^2$, respectively, compared to control values. UV-C irradiation inhibited color changes and decreased the whiteness index in carrot during storage, compared to controls. Sensory evaluation results showed that UV-C-treated carrots had better sensory characteristics than did the control. Therefore, the results suggest that UV-C irradiation could be useful to improve the microbial safety and sensory qualities of fresh-cut carrots during storage.

• Journal of Biosystems Engineering
• /
• v.31 no.4 s.117
• /
• pp.349-354
• /
• 2006

This study was performed to evaluate the performances for a concurrent flow rice dryer of pilot scale with devices for circulating rice. The pilot scale dryer with the capacity of 700 kg was developed to obtain design informations for the development of actual scale dryer of holding capacity of 10 tons. Three drying tests were conducted at two temperature levels of $100^{\circ}C\;and\;120^{\circ}C$, and two air flow rates levels of $28.5cmm/m^2\;and\;57.1cmm/m^2$. Drying conditions for Test-1, Test-2 and Test-3 were $100^{\circ}C\;-28.5cmm/m^2,\;120^{\circ}C-28.5cmm/m^2\;and\;120^{\circ}-57.1cmm/m^2}$ respectively. Drying rates were 0.73%(w.b./h) for Test-1, 0.90%(w.b./h) for Test-2 and 1.46%(w.b./h) for Test-3. The crack ratios of brown rice after drying ranged from 2.4% to 8.4%, and increased with the increase of drying rate and airflow rate. The energy consumptions were from 6,225 kJ/kg to 6,993 kJ/kg which was higher than that of conventional cross-flow rice circulating type dryer used in Korea. This results were due to the lower ambient air temperatures of $4.5^{\circ}C\;to\;13.4^{\circ}C$ during drying tests.

• Progress in Superconductivity
• /
• v.3 no.1
• /
• pp.91-94
• /
• 2001

By varying fabricating process, precursor powders with different initial conditions were prepared. Subsequently, Bi-2223/Ag tapes were made through these powders. The effects of precursor powders on the phase evolution and Jr properties of Bi-2223/Ag tapes were studied along with several thermomechanical cycles. Our results showed that the initial conditions of precursor powders could strongly influence the phase formation rate and $J_{c}$ value in final tapes. The factors of precursor powders that influence the phase formation and $J_{c}$ of Bi-2223/Ag tapes must be studied and optimized in combination.ion.

• Journal of Energy Engineering
• /
• v.8 no.2
• /
• pp.279-284
• /
• 1999

Thermal analyses were conducted in a thermogravimetric analyzer by isothermal technique in order to characterize the Korean anthracites-nitrogen oxides reaction. The tested coal sample was Dogae anthracites and compared with SP-1 graphite. Carbon-NO and carbon-N$_2$O reactions were carried out with respect to isothermal reaction temperatures (550$^{\circ}C$-900$^{\circ}C$) and reactant gas partial pressures (5 kPa∼20 kPa). In NO reaction, measured reaction orders of NO concentration and activation energy were 0.45∼0.96 and 39∼l12 kJ/mol, respectively. In N$_2$O reaction, measured reaction orders of N$_2$O concentration and activation energy were 0.62∼0.87 and 190∼215.3 kJ/mol, respectively. Compared the Korean anthracites-nitrogen oxides reaction with the combustion reaction, the reaction rate in the oxidation below 700$^{\circ}C$ decreases in the order O$_2$>NO>N$_2$O. But above 700$^{\circ}C$, the reaction rate of N$_2$O is faster than that of NO.

• Progress in Superconductivity and Cryogenics
• /
• v.19 no.2
• /
• pp.19-24
• /
• 2017

Cryogenic milling which is a combined process of low-temperature treatment and mechanical milling was applied to fabricate high critical current density $(J_c)MgB_2$ bulk superconductors. Liquid nitrogen was used as a coolant, and no solvent or lubricant was used. Spherical Mg ($6-12{\mu}m$, 99.9 % purity) and plate-like B powder (${\sim}1{\mu}m$, 97 % purity) were milled simultaneously for various time periods (0, 2, 4, 6 h) at a rotating speed of 500 rpm using $ZrO_2$ balls. The (Mg+2B) powders milled were pressed into pellets and heat-treated at $700^{\circ}C$ for 1 h in flowing argon. The use of cryomilled powders as raw materials promoted the formation reaction of superconducting $MgB_2$, reduced the grain size of $MgB_2$, and suppressed the formation of impurity MgO. The superconducting critical temperature ($T_c$) of $MgB_2$ was not influenced as the milling time (t) increased up to 6 h. Meanwhile, the critical current density ($J_c$) of $MgB_2$ increased significantly when t increased to 4 h. When t increased further to 6 h, however, $J_c$ decreased. The $J_c$ enhancement of $MgB_2$ by cryogenic milling is attributed to the formation of the fine grain $MgB_2$ and a suppression of the MgO formation.

• Journal of the Chungcheong Mathematical Society
• /
• v.7 no.1
• /
• pp.117-122
• /
• 1994

In this paper we show that if {$H_n$} is a continuous strong higher derivation of order n on an ultraprime Banach algebra with a constant c, then $c||H_1||^2{\leq}4||H_2||$ and for each $1{\leq}l$ < n $$c^2||H_1||\;||H_{n-l}{\leq}6||H_n||+\frac{3}{2}\sum_{\array{i+j+k=n\\i,j,k{\geq}1}}||H_i||\;||H_j||\;||H_k||+\frac{3}{2}\sum_{\array{i+k=n\\i{\neq}l,\;n-1}}||H_i||\;||H_k|| $$ and for a strong higher derivation {$H_n$} of order n on a prime ring A we also show that if [$H_n$(x),x]=0 for all $x{\in}A$ and for every $n{\geq}1$, then A is commutative or $H_n=0$ for every $n{\geq}1$.

• Journal of the Korean Society of Safety
• /
• v.12 no.2
• /
• pp.45-56
• /
• 1997

Fracture behavior of ex-serviced 1Cr-0.5Mo steel was measured at room($24^{\circ}C$) and elevated($538^{\circ}C$) temperature and compared with that measured with virgin 1Cr-0.5Mo steel. Compact C(T) specimens were machined from the base and welded test materials. In case of the C(T) specimens of the weld, fatigue precrack was introduced along the fusion line so that following crack growth should occurs along the region of heat affected zone. It was observed that the J-R curve of the serviced material was significantly lower than that of the virgin material at room temperature. Brittle fracture was observed in the serviced material. On the other hand, at elevated temperature no noticeable difference was found between the J-R curves of the virgin and the serviced material. The measured J-R curves were also compared with those of the 1.25Cr-0.5Mo steel obtained from the other literatures. Optical microscopy and SEM examination of the serviced material reveal the carbide in/along the grain boundary which shows material degradation due to long-term usage. An example of application of the measured J-R curves is shown.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.12a
• /
• pp.107-108
• /
• 2006

High $J_c$ $YBa_2Cu_3O_x$, superconducting films were fabricated by MOD method using fluorine-free dichloroacetic acid(DCA) as chelating solvent for preparing precursor solution. DCA-MOD precursor solution was coated on a single crystal (001) $LaAlO_3$(LAO) substrate by a dip coating method with a speed of 25 mm/min. Coated films were calcined at lower temperature up to $500^{\circ}C$ and Conversion heat treatment was performed at various temperatures of $780{\sim}810^{\circ}C$. SEM observations showed that films have very dense microstructures for the films prepared at the temperature higher than $800^{\circ}C$ regardless of diluting solvent; methanol or 2-methoxyethanol. A High critical current density ($J_c$) of 1.28 $MA/cm^2$ (@77 K and self-field) was obtained for the YBCO film prepared using 2-methoxyethanol as a solvent.

• Proceedings of the PSK Conference
• /
• 2001.04a
• /
• pp.217.1-217.1
• /
• 2001

• Proceedings of the PSK Conference
• /
• 2000.10a
• /
• pp.174.1-174.1
• /
• 2000