• 한국도서관정보학회지
• /
• 제8권
• /
• pp.127-154
• /
• 1981

Today's complicated society with a rapid change needs more objective and accurate data for the better managerical decisions and the prospect for the future other than the intuition or subjective experience by men themselves. These data can't be extracted without the analysis of actual data by a n.0, pplying any of mathematical techniques. One of these mathematical techniques, called bibliometrics has been newly developed in the field of library and information science to extract the objective data for the better services through the library operations. The Beadford's Law, one important law in bibliometrics has provided rather scientific and objective basis on the more valid building of library collection within the constraints of budget. The purpose of the study is to investigate the theory of the Bradford's Law, to clarify the possible areas of its a n.0, pplication, and to discern some problems in doing so. The results of the study can be summarized as follows; (1) There is certain difference between the graphical formulation and verbal formulation of Bradford's Law. But this law is very useful for the field of library and information science, owing to the flexibility of the a n.0, pplication of the law in the field. (2) The minimal nucleus can consist of a single periodical only if j, the number of relevant papers in the most productive journals is greater than Z/2. On the other hand, if j is less than or equal to Z/2, then the minimal nucleus will consist of 2 or more periodicals. (3) It is possible to design the most compact selection of scientific periodicals covering any specified percentage P among the total periodicals by using the formulation, log n=Plog N+(1-P)logs, or Nlog N/s=P center dot N log N/s. (4) If there is need to provide all the articles needed by users the given budget, the library can purchase the proper number of journals, by using the formulation, f center dot AN=An+PN (log N/s-logn/s). (5) In the building of the library collection based on the decreasing ratio of use, the library can subscribe to the proper number of journals according to the satisfactory degree of the need, by using the formulation, f=Nu+uNlogN/S-uNlogn/s / nNlogN/s = 1+logN/m /logN/s (6) If the order of valuable journals is decided according to the frequency of being cited, the order can't always represent the value. (7) The evaluation criteria for the journals with high value, but less cited should be made a further study.

• 대한지역사회영양학회지
• /
• 제2권4호
• /
• pp.496-504
• /
• 1997

The purpose of this study was to investigate the dietary intake, obesity index and psychosocial factors influencing obesity among 200 high school girls in Seoul. The Social Cognitive Theory provided the Conceptual basis for this study. A cross-sectional survey was conducted to examine factors related to obesity, including self-efficacy for controlling overeating, social support for eating behavior, perception of body image and weight control, nutrition knowledge, and attitudes toward obesity. The data were analyzed using t-test and multiple logistic regression. The results of this study are as follows : 1) The mean age of the girls was 16.4 years, and the rate of overweight and obesity(measured by obesity index) was 27.0$\%$. 2) The mean energy intake of subjects was 1832.3$\pm$384.0kcal. The energy derived from carbohydrates, proteins and fats was 62.7$\%$, 13.8$\%$, and 23.5$\%$, respectively. There was no significant difference between the obese and the comparison group in energy intake. 3) The result of multivariate analysis indicated that obesity had a significant relation to the perception of ideal body image, social support for eating behavior, and self-efficacy for controlling overeating(p〈0.01). As subjects preferred thinner body images(OR=0.39) and received less social support(OR=0.93), the odds of being classified as obese increased. The odds of being obese were also associated with self-efficacy, however, the relation was not strong(OR=1.04). 4) Specific social support was related to obesity among adolescent girls. As subjects received more support from family member, the odds of being obese decreased. The emotional support as well as family member's positive nutrition behavior plays a significant role. In addition, instrumental support from friends was associated with obesity. With repect to self-efficacy, the odds of being obese were increased as subjects felt less confident in controlling overeating when tempting food was placed in front of them or after an argument. In contrast, the obese group felt more confident in controlling overeating for the rest of the specific situations examined. These findings suggest that educational interventions for weight control should incorporate strategies to help participants realize their degree of obesity, to reduce the discrepancy between current and ideal body image, to elicit and maintain social support from friends and family, and to increase the self-efficacy for changing eating behaviors. (Korean J Community Nutrition 2(4) : 496-504, 1997)

• 마이크로전자및패키징학회지
• /
• 제28권1호
• /
• pp.39-46
• /
• 2021

Cu 배선(interconnect) 적용을 위한 다층박막의 적층 구조에 따른 최적 계면접착에너지(interfacial adhesion energy, Gc) 평가방법을 도출하기 위해, Ta, Cu 및 tetraethyl orthosilicate(TEOS-SiO2) 박막 계면의 정량적 계면접착에너지를 double cantilever beam(DCB) 및 4-점 굽힘(4-point bending, 4-PB) 시험법을 통해 비교 평가하였다. 평가결과, Ta확산방지층이 적용된 시편(Cu/Ta, Cu/Ta/TEOS-SiO2)에서는 두 가지 평가방법 모두 반도체 전/후 공정에서 박리가 발생하지 않는 산업체 통용 기준인 5 J/㎡ 보다 높게 측정되었다. Ta/Cu 시편의 경우 DCB 시험에서만 5 J/㎡ 보다 낮게 측정되었다. 또한, DCB시험 보다 4-PB시험으로 측정된 Gc가 더 높았다. 이는 계면파괴역학 이론에 따라 이종재료의 계면균열 선단에서 위상각의 증가로 인한 계면 거칠기 및 소성변형에 의한 에너지 손실이 증가 하는것에 기인한다. 4-PB시험결과, Ta/Cu 및 Cu/Ta계면은 5 J/㎡ 이상의 높은 계면접착에너지를 보이므로, 계면접착에너지 관점에서는 Ta는 Cu배선의 확산방지층(diffusion barrier layer) 및 피복층(capping layer)으로 적용 가능할 것으로 생각된다. 또한, 배선 집적공정 및 소자의 사용환경에서 열팽창 계수 차이에 의한 열응력 및 화학적-기계적 연마 (chemical mechanical polishing)에 의한 박리는 전단응력이 포함된 혼합모드의 영향이 크므로 4-PB 시험으로 측정된 Gc와 연관성이 더 클 것으로 판단된다.

• Nuclear Engineering and Technology
• /
• 제55권5호
• /
• pp.1519-1526
• /
• 2023

For the first time Aluminium-BariumeZinc oxide nanocomposite (ZABONC) was synthesized by solution combustion method where calcination was carried out at low temperatures (600℃) to study the electromagnetic (EM) (X/γ) radiation shielding properties. Further for characterization purpose standard techniques like PXRD, SEM, UV-VISIBLE, FTIR were used to find phase purity, functional groups, surface morphology, and to do structural analysis and energy band gap determination. The PXRD pattern shows (hkl) planes corresponding to spinel cubic phase of ZnAl₂O4, cubic Ba(NO₃)₂, α and γ phase of Al₂O₃ which clearly confirms the formation of complex nano composite. From SEM histogram mean size of nano particles was calculated and is in the order of 17 nm. Wood and Tauc's relation direct energy band gap calculation gives energy gap of 2.9 eV. In addition, EM (X/γ) shielding properties were measured and compared with the theoretical ones using standard procedures (NaI (Tl) detector and multi channel analyzer MCA). For energy above 356 keV the measured shielding parameters agree well with the theory, while below this value slight deviation is observed, due to the influence of atomic/crystallite size of the ZABONC. Hence synthesized ZABONC can be used as a shielding material in EM (X/γ) radiation shielding.

• 한국생산제조학회지
• /
• 제21권1호
• /
• pp.123-129
• /
• 2012

Recently, interests on cleaning robots workable in pipes (termed as in-pipe cleaning robot) are increasing because Garbage Automatic Collection Facilities (i.e, GACF) are widely being installed in Seoul metropolitan area of Korea. So far research on in-pipe robot has been focused on inspection rather than cleaning. In GACF, when garbage is moving, the impurities which are stuck to the inner face of the pipe are removed (diameter: 300 mm or 400 mm). Thus, in this paper, by using TRIZ (Inventive Theory of Problem Solving in Russian abbreviation), an in-pipe cleaning robot of GACF with the 6-link sliding mechanism will be proposed, which can be adjusted to fit into the inner face of pipe using pneumatic pressure(not spring). The proposed in-pipe cleaning robot for GACF can have forward/backward movement itself as well as rotation of brush in cleaning. The robot body should have the limited size suitable for the smaller pipe with diameter of 300 mm. In addition, for the pipe with diameter of 400 mm, the links of robot should stretch to fit into the diameter of the pipe by using the sliding mechanism. Based on the conceptual design using TRIZ, we will set up the initial design of the robot in collaboration with a field engineer of Robot Valley, Inc. in Korea. For the optimal design of in-pipe cleaning robot, the maximum impulsive force of collision between the robot and the inner face of pipe is simulated by using RecurDyn(R) when the link of sliding mechanism is stretched to fit into the 400 mm diameter of the pipe. The stresses exerted on the 6 links of sliding mechanism by the maximum impulsive force will be simulated by using ANSYS$^{(R)}$ Workbench based on the Design Of Experiment(in short DOE). Finally the optimal dimensions including thicknesses of 4 links will be decided in order to have the best safety factor as 2 in this paper as well as having the minimum mass of 4 links. It will be verified that the optimal design of 4 links has the best safety factor close to 2 as well as having the minimum mass of 4 links, compared with the initial design performed by the expert of Robot Valley, Inc. In addition, the prototype of in-pipe cleaning robot will be stated with further research.

• Structural Engineering and Mechanics
• /
• 제22권2호
• /
• pp.197-222
• /
• 2006

In this paper, the non-linear time-dependent closed-form, discrete and combined solutions for the post-elastic response of a geometrically and physically non-linear suspended cable to a uniformly distributed load considering the creep effects, are presented. The time-dependent closed-form method for the particularly straightforward determination of a vertical uniformly distributed load applied over the entire span of a cable and the accompanying deflection at time t corresponding to the elastic limit and/or to the elastic region, post-elastic and failure range of a suspended cable is described. The actual stress-strain properties of steel cables as well as creep of cables and their rheological characteristics are considered. In this solution, applying the Irvine's theory, the direct use of experimental data, such as the actual stress-strain and strain-time properties of high-strength steel cables, is implemented. The results obtained by the closed-form solution, i.e., a load corresponding to the elastic limit, post-elastic and failure range at time t, enable the direct use in the discrete non-linear time-dependent post-elastic analysis of a suspended cable. This initial value of load is necessary for the non-linear time-dependent elastic and post-elastic discrete analysis, concerning incremental and iterative solution strategies with tangent modulus concept. At each time step, the suspended cable is analyzed under the applied load and imposed deformations originated due to creep. This combined time-dependent approach, based on the closed-form solution and on the FEM, allows a prediction of the required load that occurs in the post-elastic region. The application of the described methods and derived equations is illustrated by numerical examples.

• Current Applied Physics
• /
• 제18권12호
• /
• pp.1465-1472
• /
• 2018

The magnetic and optical properties of Ce-doped ZnO systems have been widely demonstrated, but the effects of different strains of Ce-doped ZnO systems remain unclear. To solve these problems, this study identified the effects of biaxial strain on the electronic structure, absorption spectrum, and magnetic properties of Ce-doped ZnO systems by using a generalized gradient approximation + U (GGA + U) method with plane wave pseudopotential. Under unstrained conditions, the formation energy decreased, the system became stable, and the doping process became easy with the increase in the distances between two Ce atoms. The band gap of the systems with different strains became narrower than that of undoped ZnO without strain, and the absorption spectra showed a red shift. The band gap narrowed, and the red shift became weak with the increase of compressive strain. By contrast, the band gap widened, and the red shift became significant with the increase of tensile strain. The red shift was significant when the tensile strain was 3%. The systems with -1%, 0%, and 1% strains were ferromagnetic. For the first time, the magnetic moment of the system with -1% strain was found to be the largest, and the system showed the greatest beneficial value for diluted magnetic semiconductors. The systems with -3%, -2%, 2%, and 3% strains were non-magnetic, and they had no value for diluted magnetic semiconductors. The ferromagnetism of the system with -1% strain was mainly caused by the hybrid coupling of Ce-4f, Ce-5d, and O-2p orbits. This finding was consistent with Zener's Ruderman-Kittel-Kasuya-Yosida theory. The results can serve as a reference for the design and preparation of new diluted magnetic semiconductors and optical functional materials.

• Journal of Radiation Protection and Research
• /
• 제15권2호
• /
• pp.57-65
• /
• 1990

새로 개발한 LiF(Mg, Cu, Na, Si) 열형광선량계를 사용하여 $^{60}Co$ 원격조사장치에 의한 수중흡수선량을 측정하였다. 공기중 조사선량으로 부터 TLD 공동의 흡수선량 교정인자($D_{TLD}$/TL)를 결정하였고, 수중흡수선량은 TLD 공동의 흡수선량을 측정하여 공동이론에 의해 해석하였다. $10{\times}10cm^2$ 및 $5{\times}10cm^2$의 빔 크기에서 팬텀내 여러지점에 대하여 LiF(Mg, Cu, Na, Si) TLD로 수중흡수선량을 결정하고 동일한 위치에서 NE 2561 전리함을 사용하여 측정한 값과 비교한 결과, LiF(Mg, Cu, Na, Si) TLD의 측정오차$({\pm}3%)$ 범위내에서 잘 일치 하였다. 빔의 크기가 $5{\times}5cm^2$, $10{\times}10cm^2$ 및 $30{\times}30cm^2$인 경우에 깊이-선량 백분율과 팬텀-공기 선량비를 측정하였으며 이 값들은 British Journal of Radiology(1983)의 데이터와 잘 일치하였다.

• Archives of Plastic Surgery
• /
• 제41권1호
• /
• pp.57-62
• /
• 2014

Background Achieving symmetry is a key goal in breast reconstruction. Anatomically shaped tabbed expanders are a new tool in the armamentarium of the breast reconstruction surgeon. Suture tabs allow for full control over the expander position and thus inframammary fold position, and, in theory, tabbed expanders mitigate many factors responsible for poor symmetry. The impact of a tabbed expander on breast symmetry, however, has not been formally reported. This study aims to evaluate breast symmetry following expander-implant reconstruction using tabbed and non-tabbed tissue expanders. Methods A chart review was performed of 188 consecutive expander-implant reconstructions that met the inclusion criteria of adequate follow-up data and postoperative photographs. Demographic, oncologic, postoperative complication, and photographic data was obtained for each patient. The photographic data was scored using a 4-point scale assessing breast symmetry by three blinded, independent reviewers. Results Of the 188 patients, 74 underwent reconstruction with tabbed expanders and 114 with non-tabbed expanders. The tabbed cohort had significantly higher symmetry scores than the non-tabbed cohort ($2.82/4{\pm}0.86$ vs. $2.55/4{\pm}0.92$, P=0.034). Conclusions The use of tabbed tissue expanders improves breast symmetry in tissue expander-implant-based breast reconstruction. Fixation of the expander to the chest wall allows for more precise control over its location and counteracts the day-to-day translational forces that may influence the shape and location of the expander pocket, mitigating many factors responsible for breast asymmetry.

• 한국도서관정보학회지
• /
• 제9권
• /
• pp.115-144
• /
• 1982

In ordinary modern wester expression 'the Renaissance' was used to denote the impact made by dead Hellenism civilization in western Christendom, particularly Italian literary and artistic movement at Northern and central Italy in the late medieval period. However, A.J. Toynbee examined the renaissance from the different aspect of view. In his great work "A Study of History" in vol. IX, he succeeded in establishing the theory of historic civilization encounters in space and in time; and in time, civilization of the present and the past or between dead and infant successor contacts on the analogy of parenthood and sonship in the relation of A n.0, pparentation-and-Affiliation. The distinguished his view of 'Renaissance' was illustrated in the sense of encounters between a grown-up civilization and the 'ghost' of its long-dead predecessor. The renaissances (by the process of evocation of ghost of its parent society) has not only one single aspect of literary and artistic field but also in politics, law, science and philosophy, languages and literatures and visual arts, and religion. The main theme of this study is to examine the development of libraries and its historical meaning through Toynbee's literary renaissance. His renaissance of Languages and Literatures has three typical steps: They are: 1st step-to restive the dead literature's remains: 2nd step-to remaster their meaning: 3rd step-to reproduce them in counterfeits... Through its first and second steps, collecting and editing, annotating by compiling an anthology, thesaurus, lexicon or encyclopedia, and in its third step publishing mostly imitation of classics took place. Toynbee depicted the five outstanding eminent representatives of literary renaissance who had a n.0, ppeared on the state of history down to the time of writing. They are: Assurbanipal, Constantine prophyrogenitus, Yung Lo, K'ang Hsi, and Ch'ien Lung and the last four had all been emperors of imperia rediviva. As the result of the examination of these five emperors with three steps of literary renaissance, the common result may be summarized as follows: 1. Those emperors of imperia rediviva interested in intellectual work and study, they also were deeply involved in collecting classics in an ostensible reason. 2. There were strong political intention of collecting materials as an a n.0, ppeasement policy of civilization by transferring scholars energies to an intellectual field. 3. Under the rulers of a resuscitated universal state, the literary renaissance were a product of political plane and that the total size of collection and work were huge. 4. Since there were strong exercise of sovereign power, an active censorship by distortion and elimination was inevitable. 5. There existed newly developed strained atmosphere between grown-up and long-dead parent civilization, whenever the book collection movement had occurred. 6. Over adhesion to the parent civilization caused imitation of classic work and the creative activities were stagnated.stagnated.