• Journal of Korea Water Resources Association
• /
• v.44 no.6
• /
• pp.439-447
• /
• 2011

This study aims to test the feasibility of combined use of EFDC (Environmental Fluid Dynamics Code) hydrodynamic model and WASP7.3 (Water Quality Analysis Program) model to improve accuracy of water quality predictions of the Yongdam Lake, Korea. The orthogonal curvilinear grid system was used for EFDC model to represent riverine shape of the study area. Relationship between volume, surface and elevation results were checked to verify if the grid system represents morphology of the lake properly. Monthly average boundary water quality conditions were estimated using the monthly monitored water quality data from Korean Ministry of Environment DB system. Monthly tributary flow rates were back-routed using dam discharge data and allocated in proportion to each basin area as direct measurements were not available. The optimum number of grid system was determined to be 372 horizontal cells and 10 vertical layers of the site for 1 year simulation of hydrodynamics and water quality out of iterative trials. Monthly observed BOD, TN, TP and Chl-a concentrations inside the lake were used for calibration of WASP7.3 model. This study shows that EFDC and WASP can be used in series successfully to improve accuracy in water quality modeling. However, it was observed that the amount of data to develop inflow water quality and flow rate boundary conditions and water quality data inside lake for calibration were not enough for accurate modeling. It is suggested that object-oriented data collection systems would be necessary to ensure accuracy of EFDC-WASP model application and thus for efficient lake water quality management strategy development.

• 전기의세계
• /
• v.21 no.2
• /
• pp.9-19
• /
• 1972

The transient characteristics of separately excited d-c motor driven by thyristor d-c chopper is studied in this paper. The armature controlled system is applied. As a result of theoretrical analysis the following conculsions were drawn: (1) For the transient analysis, it is recognized that the state transition analysis is a more general method and powerful tool than the state equation method or signal flow graph method, although it includes iterative matrix calculations. And the system is dealt with a finite width sampled-data system in the state transition analysis. (2) The transient characteristics of the motor angular velocity and its torque to the sampling duration variation are compared with those due to the amplitude variation of d-c chopper voltage as follows. The attenuation rate of the transient characteristics is equal in both cases, but the initial value of the transient characteristics in former case is greater than in latter case. (3) The roots of characteristics equation of the system lie inside the unit circle of the Z-plane. Therefor the system is stable. Further it is found that as the sampling duration is decreased the relative stability is lessened.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.22-24
• /
• 1996

The problem of the heat flow in the Surface Permanent Magnet Synchronous Motor(SPMSM) at various load condition is solved by use of the thermal equivalent network method. For the correction of the, design parameters of SPMSM and for the exact analysis of several characteristics, the iterative method combining the characteristics analysis and the thermal analysis. Then the analyzed results and the measured data are compared.

• Journal of Ship and Ocean Technology
• /
• v.4 no.2
• /
• pp.13-23
• /
• 2000

A low-order potential based boundary element method is applied to the prediction of the flow around the cavitating propeller in steady or in unsteady inflow. For given cavitation number, the cavity shape is determined in an iterative manner until the kinematic and the dynamic boundary conditions are both satisfied on the approximate cavity boundary. In order to improve the solution behavior near the tip region, a hyperboloidal panel geometry and a modified split panel method are applied. The method is then extended to include the analysis of time-varying cavitating flows around the propeller blades via a time-step algorithm in time domain. In the method, the steady state oscillatory solution is obtained by incremental stepping in the itme domain. Finally, the present method is validated through comparison with other numerical results and experimental data.

• 제어로봇시스템학회:학술대회논문집
• /
• 1998.10a
• /
• pp.501-506
• /
• 1998

A mathematical model is developed to describe the relationship between the manipulated variables (e.g. jacket inlet temperature and feed flow rate) and the important qualities (e.g conversion and weight average molecular weight (Mw)) in a continuous polymerization reactor. The subspace-based identification method for Wiener model is used to retrieve from the discrete sample data the accurate information about both the structure and initial parameter estimates for iterative parameter optimization methods. The comparison of the output of the identified Wiener model with the outputs of a non-linear plant model shows a fairly satisfactory degree of accordance.

• Structural Engineering and Mechanics
• /
• v.15 no.2
• /
• pp.225-238
• /
• 2003

In the present study, the finite strip analysis of a box girder to simulate a ship's hull model is carried out to investigate its inelastic post-buckling behavior and to predict its ultimate flexural strength. Residual stresses and initial geometrical imperfections are both considered in the combined material and geometrical nonlinear analysis. The von-Mises yield criterion and the Prandtl-Reuss flow theory of plasticity are applied in modeling the elasto-plastic behavior of material. The Newton-Raphson iterative process is also employed in the analysis to achieve convergence. The numerical results agree well with the experimental data. The effects of some material and geometrical parameters on the ultimate strength of the structure are also investigated.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.1
• /
• pp.1-8
• /
• 2005

An axisymmetric compressible flow solver accounting for chemical equilibrium has been developed as an analysis tool exclusively suitable for performance prediction and optimum contour design of LRE thrust chamber. By virtue of several features focusing on user-friendliness and effectiveness including automatical grid generation and iterative calculations with changes in design parameters prescribed through only one keyword-type input file, a design engineer can evaluate very fast and easily the influences of various design inputs such as geometrical parameters and operating conditions on propulsive performance. Validations have been carried out for various aspects by detailed comparisons with the result of CEA code, experimental data of JPL nozzle, actual data for two historical engines, and ReTF data for KSR-III.

• Journal of Internet Computing and Services
• /
• v.20 no.3
• /
• pp.85-92
• /
• 2019

In this paper, we extract the quantitative relation data of activities from the workflow event log file recorded in the XES standard format and connect them to rediscover the workflow process model. Extract the workflow process patterns and proportions with the rediscovered model. There are four types of control-flow elements that should be used to extract workflow process patterns and portions with log files: linear (sequential) routing, disjunctive (selective) routing, conjunctive (parallel) routing, and iterative routing patterns. In this paper, we focus on four of the factors, disjunctive routing, and conjunctive path. A framework implemented by the authors' research group extracts and arranges the activity data from the log and converts the iteration of duplicate relationships into a quantitative value. Also, for accurate analysis, a parallel process is recorded in the log file based on execution time, and algorithms for finding and eliminating information distortion are designed and implemented. With these refined data, we rediscover the workflow process model following the relationship between the activities. This series of experiments are conducted using the Large Bank Transaction Process Model provided by 4TU and visualizes the experiment process and results.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.770-774
• /
• 2006

The determination of feasible design flood is the most important to control flood damage in river management. Model parameters should be calibrated using observed discharge but due to deficiency of observed data the parameters have been adopted by engineer's empirical sense. Storage coefficient in the Clark unit hydrograph method mainly affects magnitude of peak flood. This study is to estimate the storage coefficients based on the observed rainfall-runoff events at the four stage stations in the Hantan river basin. Model calibration is the process of adjusting model parameter values until model results match historical data. An objective function which is the percent difference between the observed and computed peak flows is available for measuring the goodness-of-fit between computed and observed hydrographs. By sensitivity analysis for the storage coefficient, it has been shown that the storage coefficients affect the peak flows. The Clark parameters adopted in the River Rectification Basic Plan have been estimated through an iterative process designed to produce a hydrograph with the peak flow.

• Journal of the Korean Society of Systems Engineering
• /
• v.1 no.1
• /
• pp.14-19
• /
• 2005

High temperature vacuum furnaces or high standard electric furnaces demand high technology level and high production cost. Therefore, an iterative design process and the optimization approach under integrated computing environment are required to reduce the development risk. Moreover, it also required to develop an integrated design software that can manage the centralized database system between factory and design department, and the automated furnace design and analysis. The developed software is dedicated to the development of the vacuum (electric) furnaces. Based on the distribute middleware system, the GUI module, the CAD module, the thermal analysis module and the optimization module are integrated. For the DBMS, Microsoft Access is employed, the GUI is developed using Visual Basic language, and AutoCAD is utilized for the configuration design. By investigating the analysis code interface, the analysis and optimization process, and the data communication method, the overall system architecture, the method to integrate the optimizer and ana lysis codes, and the method to manage the data flow are proposed and verified through the optimal furnace design.