• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 가을 학술발표회 논문집
• /
• pp.421-428
• /
• 2003

For the initial equilibrium states of cable stayed bridges, this study presents a method to determine initial cable forces through successive iteration of the cable forces to minimize the errors between target moments or displacements and result of nonlinear analysis. Stay cables are modeled by truss elements and least square method was used to minimize the errors. In the structural characteristics of cable stayed bridges, a large axial force is introduced in the pylon and stiffening girder so fictitious section areas are assumed to determine initial cable forces accurately. To verify usefulness and validity of the proposed algorithm, some numerical analysis has been conducted and compared with the existing study.

• Journal of applied mathematics & informatics
• /
• 제28권5_6호
• /
• pp.1467-1476
• /
• 2010

The aim of this paper is to propose a cubic convergent regula falsi iterative method for solving the nonlinear equation f(x) = 0, where f : [a,b] $\subset$ R $\rightarrow$ R is a continuously differentiable. In [3,6] a quadratically convergent regula falsi iterative methods for solving this nonlinear equations is proposed. It is shown there that both the sequences of diameters and iterative points sequence converge to zero simultaneously. So The aim of this paper is to accelerate further the convergence of these methods from quadratic to cubic. This is done by replacing the parameter p in the iteration of [3,5,6] by a function p(x) defined suitably. The convergence analysis is carried out for the method. The method is tested on number of numerical examples and results obtained shows that our methods are better and more effective and comparable to well-known methods.

• Structural Engineering and Mechanics
• /
• 제66권1호
• /
• pp.27-36
• /
• 2018

The objective of this work is to analyze geometrically nonlinear static analysis a simply supported laminated composite beam subjected to a non-follower transversal point load at the midpoint of the beam. In the nonlinear model of the laminated beam, total Lagrangian finite element model of is used in conjunction with the Timoshenko beam theory. The considered non-linear problem is solved considering full geometric non-linearity by using incremental displacement-based finite element method in conjunction with Newton-Raphson iteration method. There is no restriction on the magnitudes of deflections and rotations in contradistinction to von-Karman strain displacement relations of the beam. In the numerical results, the effects of the fiber orientation angles and the stacking sequence of laminates on the nonlinear deflections and stresses of the composite laminated beam are examined and discussed. Convergence study is performed. Also, the difference between the geometrically linear and nonlinear analysis of laminated beam is investigated in detail.

• 산업경영시스템학회지
• /
• 제22권52호
• /
• pp.297-309
• /
• 1999

Resource Constrained Dynamic Multi-Projects Scheduling(RCDMPS) is intended to minimize the total processing time(makespan) of two or more projects sequentially arriving at the shop under restricted resources. The aim of this paper is to develop the new Tabu Search heuristic for RCDMPS to minimize makespan. We propose the insertion method to generate the neighborhood solutions in applying the Tabu Search for the RCDMPS and the diversification strategy to search the solution space diversely. The proposed diversification strategy apply the dynamic tabu list that the tabu list size is generated and renewed at each iteration by the complexity of the project, and change the proposed tabu attribute. In this paper, We use the dynamic tabu list for the diversification strategy and intensification strategy in the tabu search, and compare with other dispatching heuristic method to verify that the new heuristic method minimize the makespan of the problem.

• 한국통신학회논문지
• /
• 제17권8호
• /
• pp.891-897
• /
• 1992

본 논문은 일반반복 화상 처리가 화상 전체에 화사의 정보와 상관없이 일률적인 방법으로 적용함으로서 생기는 비 효율성을 고려하여 처리하는 화소의 주변 화상 정보를 이용하여 평면 부분과 윤곽 부부느이 처리회수를 달리하여 주므로서 시각적인 효과와 동시에 처리 시간을 단축하는 국부 반복 복원 방법을 제안하였다. 국부 반복 복원 방법은 일반 반복, 복원 알고리즘을 적용하여 윤곽 부분을 집중 복원하고 평면 부분은 복원없이 통과하는 방법으로, 여기에 사용된 일반 반복 알고리즘이 수렴하면 국분 반복 복원도 수렴하게 됨을 이용하였다. 각각 처리된 화상,MSE, 처리 시간등을 비교하여 그 효율성을 확인하였다.

• 대한전기학회논문지
• /
• 제34권7호
• /
• pp.267-275
• /
• 1985

The finite element method for calculating single phase transformer inductance is presented in this paper. There are three basic definitions of saturated transormer inductance. The set of nonlinear finite element equations is solved by the Newton-Raphson method which assures nearly quadratic convergence of the iteration process. The effect of perturbation of currents of this transformer is used to calculate the saturated winding inductance. This approach is used to calculate the apparent, effective and incremental inductance of single phase transformer. The apparent inductance is in good agreement with resting result. The approach enabled one to study the variation of winding inductance according to the saturation levels in the core at any operating point.

• 대한전기학회논문지
• /
• 제39권3호
• /
• pp.223-231
• /
• 1990

Optimal Power Flow (OPF) solution by the Newton's method provides a reliable and robust method to classical OPF problems. The major challenge in algorithm development is to identify the binding inequalities efficiently. This paper proposes a simple strategy to identify the binding set. From the mechanism of penalty shifting with soft penalty in trial iteration, an active binding set is identidied automatically. This paper also suggests a technique to solve the linear system whose coefficients are presented in the matrix from. This implementation is highly efficient for sparsity programming. Case studies for 3, 5, 14, 118 bus and practical TPC-190, KEPCO-306 bus systems are performed as well.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.223-225
• /
• 1998

This paper presents a new approach for power flow calculation, which minimizes the transmission losses in power systems with the control of voltage magnitudes on P-V nodes. In this approach, the transmission losses are re-distributed to each P-V node, at each iteration, to reduce the effect of slack. The steepest descent method is adopted, in this study, to minimize the transmission losses augmented with penalty functions to account for voltage constraints. IEEE 14 and 30 buses test systems were used for the performance demonstration of the proposed method in this paper. The simulation results showed that the proposed method can reduce transmission losses and improve voltage profiles of power systems.

• Nuclear Engineering and Technology
• /
• 제49권6호
• /
• pp.1143-1156
• /
• 2017

This paper describes recent development activities of the GENESIS code, which is a transport code for heterogeneous three-dimensional geometry, focusing on applications to reactor core analysis. For the treatment of anisotropic scattering, the concept of the simplified Pn method is introduced in order to reduce storage of flux moments. The accuracy of the present method is verified through a benchmark problem. Next, the iteration stability of the GENESIS code for the highly voided condition, which would appear in a severe accident (e.g., design extension) conditions, is discussed. The efficiencies of the coarse mesh finite difference and generalized coarse mesh rebalance acceleration methods are verified with various stabilization techniques. Use of the effective diffusion coefficient and the artificial grid diffusion coefficients are found to be effective to stabilize the acceleration calculation in highly voided conditions.

• Structural Engineering and Mechanics
• /
• 제41권6호
• /
• pp.775-789
• /
• 2012

This paper focuses on post-buckling analysis of functionally graded Timoshenko beam subjected to thermal loading by using the total Lagrangian Timoshenko beam element approximation. Material properties of the beam change in the thickness direction according to a power-law function. The beam is clamped at both ends. The considered highly non-linear problem is solved by using incremental displacement-based finite element method in conjunction with Newton-Raphson iteration method. As far as the authors know, there is no study on the post-buckling analysis of functionally graded Timoshenko beams under thermal loading considering full geometric non-linearity investigated by using finite element method. The convergence studies are made and the obtained results are compared with the published results. In the study, with the effects of material gradient property and thermal load, the relationships between deflections, end constraint forces, thermal buckling configuration and stress distributions through the thickness of the beams are illustrated in detail in post-buckling case.