• Structural Engineering and Mechanics
• /
• 제60권3호
• /
• pp.405-412
• /
• 2016

Bone is a living material with a complex hierarchical structure that gives it remarkable mechanical properties. Bone constantly undergoes mechanical. Its quality and resistance to fracture is constantly changing over time through the process of bone remodeling. Numerical modeling allows the study of the bone mechanical behavior and the prediction of different trauma caused by accidents without expose humans to real tests. The aim of this work is the modeling of the femur fracture under static solicitation to create a numerical model to simulate this element fracture. This modeling will contribute to improve the design of the indoor environment to be better safe for the passengers' transportation means. Results show that vertical loading leads to the femur neck fracture and horizontal loading leads to the fracture of the femur diaphysis. The isotropic consideration of the bone leads to bone fracture by crack propagation but the orthotropic consideration leads to the fragmentation of the bone.

• 소성∙가공
• /
• 제22권3호
• /
• pp.133-142
• /
• 2013

Recently, electric vehicles and hybrid cars are being promoted as alternatives to reduce automobile emissions. Generally, thin sheet materials such as aluminum alloy AA300X and cold-rolled steel sheet such as JIS-G-3141 are used for the container for the lithium-ion secondary batteries. In this study, a multi-stage deep drawing process is used to produce a rectangular cup from thin stainless steel sheet material, SUS409L, with an initial blank thickness of 0.4mm for the battery container application. Numerical simulations of the first through the fifth stages for the multi-stage deep drawing with thin SUS409L sheet were conducted using LS-Dyna3D Implicit/Explicit. Special consideration was given to the deformation characteristics due to the normal anisotropy of the sheet material. The numerical simulations were conducted with both isotropic properties and the anisotropic properties of the initial blank material. An unexpected forming failure, barreling in the bottom region of the deep drawn rectangular cup, was observed. This failure mode can be avoided by additional ironing thickness control during the process.

• Composites Research
• /
• 제19권3호
• /
• pp.29-36
• /
• 2006

섬유강화 복합재료는 적층각도와 적층순서에 따라 이방성을 가지기 때문에, 복합재료가 튜브형 접합부의 피접착체로 사용될 경우 지금까지 많이 수행된 등방성 피접착체를 가지는 접합부에 대한 해석을 통하여 복합재료 접합부의 거동을 예측하는 것은 한계가 있다. 본 연구에서는 접착제의 비선형 거동을 고려하여 복합재료 피접착체를 가지는 튜브형 접합부에 대한 비선형 해석을 수행하였다. 먼저 적층 복합재료 튜브에 대한 해석을 수행하였고, 이를 바탕으로 튜브형 접합부에 대한 비선형 방정식을 유도하였으며, 접착층의 응력 분포 및 접합부의 토크전달능력을 계산하였다. 복합재료 튜브의 적층순서와 접착길이가 접착층의 응력 분포 및 토크전달능력에 어떤 영향을 미치는 지 살펴보았으며, 또한 비선형 해석과 선형해석의 차이점을 비교하고 분석하였다.

• Composites Research
• /
• 제30권4호
• /
• pp.247-253
• /
• 2017

본 연구에서는 분자동역학 전산모사와 이중 입자 모델을 이용하여 질화붕소 나노튜브-폴리메틸메타크릴레이트 나노복합재의 기계적 물성과 계면특성을 규명하였다. 단일 벽 나노튜브가 고분자 기지에 함침된 가로등방성 나노복합재 단위 셀 구조를 모델링한 후, 각 방향으로의 일축인장 및 전단 전산모사를 통해 나노복합재의 강성행렬을 예측하였다. 또한 강성행렬의 방향 평균을 취해 나노튜브가 기지 내에 랜덤 분포하는 경우의 등방성 탄성계수를 도출하였다. 분자동역학 해석 결과를 계면의 완전 결합을 가정한 이중 입자 모델 예측해와 비교한 결과, 질화붕소 나노튜브와 고분자 기지간의 계면이 불완전한 것으로 확인되었다. 나노튜브 주위에 형성되는 흡착계면의 물성을 예측하기 위해 2단계 영역 분할 기법을 도입하였고 계면의 불완전 결합을 선형 스프링으로 묘사하였다. 그 결과 다양한 스프링 컴플라이언스 값에 따른 흡착계면의 물성을 역 해석을 통해 확인할 수 있었다.

• 한국음향학회지
• /
• 제25권4호
• /
• pp.164-171
• /
• 2006

임의의 등방성재료에 대한 종파, 횡파 및 누설표면파의 음속을 알면 해석적으로 그 재료의 탄성정수와 밀도를 산출할 수 있다. 종래, 그 음속들은 각각 다른 진동모드를 갖는 세 개의 초음파 트랜스듀서에 의해 측정되어져 왔다. 본 연구에서는 하나의 트랜스듀서에 의해 그 세 가지 파의 개략적인 음속을 동시에 측정하기위한 전극분할형 PVDF 직선집속 초음파 트랜스듀서를 새로이 제안하고, 설계, 제작하였다. 그리고 그것에 의한 각 파의 음속측정 방법을 확립한 후, 용융석영 등 몇몇 등방성재료에 적용하였다. 또한, 측정된 각 파의 음속을 이용하여 탄성 강성정수 및 밀도를 산출하고, 각 값들의 오차를 검토하였는데, 얻어진 값들은 문헌치와 비교적 잘 일치함을 알 수 있었다.

• 한국강구조학회 논문집
• /
• 제9권1호통권30호
• /
• pp.65-79
• /
• 1997

Composite materials are consist of two or more different materials to produce desirable properties for structural strength. Because of their superiority in strength, corrosion resistance, and weight reduction, they are used extensively as structural members. The objective of this study is to present the effectivness of the laminated composite elements by analyzing in-plane displacement and stress of the anisotropic laminated annular elements. Anisotropic laminated structures are very difficult to analyze and apply, compared with isotropic and orthotropic cases for arbitrary boundaries and fiber angle -ply. Boundary conditions for the examples used in this study consist of two opposite edges clamped and the other two edges free, and finite difference method is used in this study for numerical analysis. From the numerical result, it is found that the program used in this study can be used to obtain the displacement of the straight beams considering it's transverse shear deformation as well as anisotropic laminated elements. Several numerical examples show the advantages of the stiffness increase when the angle-ply composite materials are used. Therefore it gives a guide in deciding how to make use of fiber's angle for the subtended angle, load cases, and boundary conditions.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.95-98
• /
• 2005

This paper proposes the solutions predicting the coefficient of the thermal expansion changes of composites which include the fiber-like shaped ($a_1$ > ($a_2$ = ($a_3$) and the disk-like shaped (al = a2> a3) inclusions like two dimensional geometries, which has one aspect ratios, ${\alpha}$ = ($a_1$ /($a_3$). The analysis follows the procedure developed for elastic moduli by using the generalized approach of Eshelby’s equivalent tensor. The influences of the aspect ratios, on the effective coefficient of thermal expansion of composites containing aligned isotropic inclusions are examined. This model should be limited to analyze the composites with unidirectionally aligned inclusions and with complete binding to each other of both matrix and inclusions having homogeneous properties. The coefficient of thermal expansion of composites (${\theta}_{11}$,${\theta}_{22}$and ${\theta}_{33}$) are investigated. From material data of the composites with glass fiber in epoxy resin, the thermal expansions along the aspect ratio were obtained and similar to the Chow model. The longitudinal coefficients of thermal expansion ${\theta}_{11}$decrease, as the aspect ratios increase. However, the transverse coefficients of thermal expansion ${\theta}_{22}$increase or decrease, as the aspect ratios increase. And both of them decrease, as the concentration increases.

• Steel and Composite Structures
• /
• 제12권3호
• /
• pp.249-260
• /
• 2012

In this study, stress and deflection behaviours of T-type welding joint applied to HE200M steel beam and column were investigated in finite element method (FEM) under different distributed loads. In the 3D-FEM modelling, glue option was used to contact between steel materials and weld nuggets. Geometrical model was designed as 3-dimensional solid in ANSYS software program. After that, homogeneous, linear and isotropic properties were used to design to materials of model. Solid-92 having 3-dimensional, 4 faced and 10-noded was selected as element type. In consequence of mesh operation, elements of 13285 and nodes of 28086 were occurred. Load distribution was applied to top surface of steel beam to determine behaviours of stress and deflection. As a result of FEM analysis applied with the loads of 55,000 N, 110,000 N and 220,000 N, maximum values were obtained as 116 N/$mm^2$, 232 N/$mm^2$ and 465 N/$mm^2$ for stress and obtainedas 1,083 mm, 2,166 mm and 4.332 mm for deflection, respectively. When modelling results and classical calculation values were compared, it was obtained difference of 10 % for stress values and 2.5% for deflection values.

• Composites Research
• /
• 제32권2호
• /
• pp.108-112
• /
• 2019

최근 복합재를 적용한 경량화에 관한 연구가 지속적으로 수행됨에 따라 탄소섬유 복합재료를 사용하여 강성대비 경량화를 목표로 하는 부품 연구가 증가하고 있다. 복합재료는 등방성 재료와는 달리 적층판의 방향과 적층 순서에 따라 물리적 특성이 변화한다. 그러므로 복합재료 사다리의 경우 계획한 설계를 검증하기 위해서 구조 해석을 수행하는 것이 필수적이다. 본 연구에서는 패브릭 소재를 적용하여 사다리를 설계하였다. 또한 유한요소해석을 통하여 하중 위치가 사다리에 미치는 영향을 분석하고 가장 문제가 되는 위치를 선정하여 구조적 성능을 분석하였다. 다양한 적층 순서를 적용하여 구조해석을 실시하고 각 층에서의 파손 값을 측정함으로써 적층 순서가 사다리의 구조 강도에 미치는 영향을 분석하였다.

• 소성∙가공
• /
• 제32권3호
• /
• pp.129-135
• /
• 2023

The use of engineering plastic products in internal combustion engine and electric cars to improve stiffness and reduce weight is increasing significantly. Among various lightweight materials, engineering plastics have significant advantages such as cost reduction, improved productivity, and weight reduction. In particular, engineering plastics containing glass fibers are used to enhance stiffness. However, the stiffness of glass fibers can increase or decrease depending on their orientation. Before developing plastic products, optimal designs are determined through injection molding and structural analysis to enhance product reliability. However, reliable analysis of products with variable stiffnesses caused by anisotropy cannot be achieved via the conventional isotropic structural analysis, which does not consider anisotropy. Therefore, based on the previously reported study "the Effect of Impacted Fracture in Glass Fiber Orientation with Injection Molding & Structural Coupled Analysis," this study aims to investigate the structural analysis and degradation mechanisms of various polymers. In particular, this study elucidates the actual mechanism of plastic fracture by analyzing various fracture conditions and their corresponding simulations. Furthermore, the objective of this study is to apply the injection molding and structural coupled analysis mechanism to develop engineering plastic products containing glass fibers. In addition, the study aims to apply and improve the plastic fracture mechanism in actual products by exploring anisotropy and stiffness reduction owing to the unfilled polymer weld line.